WMS CHANGELOG | rel380

WMS Stable changelog: all the latest features, improvements and fixes.
Update repository: rel380


Important: In case of upgrade from WMS version 2.x to 3.85 the upgrade procedure might require to be performed twice to install all available packages.

Important: starting from WMS version 3.88.42218.38, changes Remote Support Server IP; the following IP ranges are now used by Remote Support server (make sure they don’t collide with your internal network ranges): 172.16.0.0/16; 172.20.0.0/16; 172.25.0.0/16; certificates for connection to remote support for PBXs which are not upgraded expire on 1 May 2019!

Important: From version 3.88.41708.32 option DHCP 176 is reserved for VLAN configuration of phones, if your DHCP server provides this option disable it or make sure it contains the right VLAN for the phones. 

Note: Upgrade to version higher than 3.84.x is not possible for Hardware PBXs with serial number matching 000db9* (Geode CPU)

Note: In case of WMS Network, we recommend to upgrade all the PBXs to the same WMS version

Version 3.88.42906.48 Date 10.12.2018

Improvements

[WMS-5522] – sys: added the possibility to allow overriding of general settings of queues.conf file
How-to: – Add a custom parameter to „include queues-general-custom.conf“ section of queues.conf file, for example, „autofill = yes“ – After the system upgrade, the custom parameter is saved and not overwritten

[WMS-5556] – kit: removed the required Kite connection via Remote support
Kite now directly connects to PBX and Remote support is required only in case when the direct connection is impossible (e.g. PBX is located behind NAT/ Firewall).

[WMS-5574] – sys: optimized load on WP4X0 in case a large number of BLF keys were configured

[WMS-5654] – dev: reverted the change [WMS-5395]: auto call generation when picking up a handset after pressing “History”, “Phonebook”, “Redial” keys is re-enabled

Fixes

[WMS-5237] – sys: fixed an issue in which call recordings contained background noise in some rare cases

[WMS-5267] – sys: fixed an issue when a Call Group member with CG strategy „Call All 32“ could not pick up a call from BLF key „Park location“ on WP if the call was parked via Blind transfer

[WMS-5301] – sys: fixed no media issue in WebRTC calls because RTPengine used incorrect PBX Public IP

[WMS-5390] – sys: fixed an issue when after reactivation of Per User PBXs, old HW Serials were sent to portal instead of new SW ones

[WMS-5448] – col: fixed an issue with Web phone being not present in the device selection after opening a new Collaboration session on another browser or PC

[WMS-5479] – sys: fixed an issue with transcoding of call recordings, recorded via Dialplan, to G.729 in case of calling from Android/ iOS/ WP to Collaboration and adding Dialplan application „Set -> Codecs -> alaw,ulaw“

[WMS-5524] – col: fixed an issue when it was impossible to open transferred images in Collaboration upon the first login into a browser or after browser restarting

[WMS-5615] – sys: fixed an issue with impossibility to assign/ reassign WP600 old generation (pre 2015) to a user after WMS release 3.88.42535

Version 3.88.42724.46 Date 26.11.2018

Improvements

[WMS-5356] – dev: improved devices failover procedure
In case WMS network is deactivated, devices registered to the Secondary (Client) PBX do not sync the configuration with the Failover PBX

[WMS-5409] – app: improvements for Integration service (Windows and macOS v.  2.9.11)  and Screen sharing component (Windows v. 3.19, macOS v. 3.2.2)

  • Added the visualization (a red border around the screen) when the screen sharing is enabled
  • Added a notification when the screen sharing disconnects
  • Fixed an issue when in some rare cases it was impossible to use Integration service and Screen sharing in Collaboration native app for multi-user Windows environment (TS and RDP)

Fixes

[WMS-5099] – sys: fixed an issue with BLFs presence status and voicemail notifications not being shown correctly in some conditions because PBX engine did not deliver them correctly

[WMS-5306] – sys: fixed an issue with status of a CG member who logged in a Call group via Feature Code „Call group“ 97 or „Contact center“ feature in Collaboration being not „in use“ in case the member made or received calls not related to the Call group

[WMS-5346] – col: fixed an issue when it was impossible to transfer an incoming call to Voicemail in case the call was resumed from BLF key „Park location“

[WMS-5414] – sys: fixed an issue with missed calls of a Call group with „Linear“ call strategy not being shown in WP history

[WMS-5416] – sys: fixed an issue with voicemails not being displayed on WP 2015-2017 in case a voicemail box contained more than 300 messages
Limitation: the last 200 voicemail messages are now displayed on WP 2015-2017. To access the rest of voicemails, use Feature Code „Voicemail“ 82 or Collaboration

[WMS-5419] – dev: fixed an issue with W-PA not being auto upgraded because of impossibility to download a new firmware version

[WMS-5427] – sys: fixed an issue with audio notifications when recording a call not being played back in case call recordings were saved to a network share

[WMS-5429] – wms: fixed an issue with „offline“ status of an existing online user in WMS Network when a newly created user started a chat with him/ her

[WMS-5470] – sys: fixed an issue with failover PBX sending alerting email notifications every 2 hours if MySQL was set up as CDR backend

[WMS-5472] – sys: fixed an issue with 30-minute reboot after running „sync_all_device“ script on Cloud/ Virtual PBXs

[WMS-5483] – sys: fixed an issue with devices not being synced after reboot or upgrade of Cloud/ Virtual PBXs

[WMS-5497] – sys: fixed an issue in which WP History detail (soft key „History“ -> „Detail“) couldn’t be displayed in some rare cases if Sqlite was set as CDR backend

New Firmware
New firmware for WP480 r3 version 63.145.8.95, WP490 r3 version 67.145.8.59

[WMS-5121] – dev: fixed call drop issue in case DHCP Server lease time was set to 30 minutes

[WMS-5395] – dev: disabled auto call generation after picking up a handset when pressing “History”, “Phonebook”, “Redial” keys to avoid accidental outgoing calls
Note: The functionality is enabled by default. To return to the previous state:

  • Go to the web interface of a phone -> “Phone” tab -> “Preferences” -> “Off-Hook dialed out” option
  • Select “Enabled” to return to the previous behavior

[WMS-5396] – dev: improved the logic of the feature “blinking state of the blf when the monitored user has the current + incoming call”: now BLF key “Colleague” always stops blinking when the monitored user completes a call transfer

[WMS-5457] – dev: improved the recovery of WP 2015-2017 during the update procedure in case it was interrupted resulting in a continuous reboot of devices
Limitations:

  • The issue of a continuous reboot is still present in case of updating from old versions xx.xxx.7.xx to new ones xx.xxx.8.xx
  • The recovery improvement will be implemented only after installing a next firmware version after the current one

Hotfix Date: 19.11.2018

Wildixair-firmware package 2.0.42799.47

[WMS-5542] – dev: fixed an issue with W-AIR Base/ SB continuous reboot because the base made too many attempts to download the same firmware version for W-AIR Handsets as its own firmware


Version 3.88.42575.44 Date: 12.11.2018
Improvement
[WMS-5341] – sys: added possibility to disable push notifications for Call group calls via “SKIP_PUSH_NOTIFICATION” variable
How-to: before “Call group” Dialplan application, add “Set” application -> SKIP_PUSH_NOTIFICATION -> yes” to disable push notifications (including mobile and web push)

Documentation: https://confluence.wildix.com/x/BAA8AQ

Fixes
[WMS-5210] – sys: fixed an issue in which a Call group member who changed user status to “DND” while being paused for wrap up time (“Agent paused” status), switched back to “Available” status after expiration of wrap up time

[WMS-5234] – wms: fixed an issue in which it was impossible to open/edit user’s preferences in WMS in case custom user status containing ampersand symbol “&” was present in Collaboration (Settings -> Chat/ Presence)

[WMS-5282] – sys: fixed an issue with BLF keys in which (appeared after WMS Stable release 3.88.42041.36):

  • “Call group” continued blinking after a Call group call was picked up via the BLF
  • “Timetable”/ “Switch/ “3 state switch” returned back to the previous state after being changed in some rare cases

[WMS-5295] – sys: fixed an issue with Call group strategy “Call All 32” in which a call group member wasn’t put on pause for wrap up time after completing a call

[WMS-5354] – sys: fixed an issue when after rejecting an incoming call on a Call group, a CG member received the same call after 5 seconds

[WMS-5357] – sys: fixed an issue with Dialplan application “Lookup called name in phonebook” not working with Dial the trunk / Trunk group application, because after completion of a lookup in a specified phonebook, an auto lookup in all phonebooks was performed

[WMS-5377] – sys: fixed an issue when in some cases after re-login to Collaboration two web phones were present in the device selection list

[WMS-5386] – wms: fixed an issue with incorrect language detection in TTS/ STT services in some cases (not installed/ deleted language package; restored backup without installed language package; newly created PBXs) after upgrade from WMS 3.84 or lower versions

[WMS-5400] – sys: fixed an issue with IP address not being updated in DNS if Remote support was disabled

[WMS-5412] – sys: fixed an issue with SIP Proxy restart in case over 1000 remote devices were connected to PBX

[WMS-5417] – col: fixed an issue with call from trunk being dropped 30 seconds after it was transferred to another user and answered in Collaboration, due to changed codec

Hotfix [WMS-5492] – sys: fixed an issue with incorrect displaying of Packet loss indication on WP

Firmware

W-AIR Firmware version 04.10.00.09 (W-AIR Base / SB) 

[WMS-5192] – dev: fixes an issue in which base station was unable to restore a connection to the PBX via TCP/TLS if a connection between them was absent for more than 10 min


Hotfix version 3.88.42535.44 Date: 30.10.2018
[WMS-5434] wms: fixed an issue with Kite calls not working after WMS release 3.88.42535.1

Version 3.88.42535.1 Date: 29.10.2018

Improvements

[WMS-5073] – sys: improved FIAS hotel integration: voicemails left for hotel room numbers are now deleted after guest check-out
Limitation: voicemails are deleted in case guest moved to another room.

[WMS-5205] – sys: improved US Date format displayed on WP idle screens

For US select one of the following Date format options in WMS / Collaboration: “mmm dd yyyy”/  “mm/dd/yyyy”/ “mm-dd-yyyy”

[WMS-5229] – sys: call group improvements for Call group strategy “Call All 32”

  • custom ringtone via Set application is now applied also for Call All 32 strategy on WP4X0
  • call class is now automatically determined
    Updated documentation: https://confluence.wildix.com/x/BAA8AQ

[WMS-5307] – dev: added custom provisioning parameter for W-AIR Base allowing to extend the number of devices from 20 (default) to 30

Documentation: https://confluence.wildix.com/x/KQg8AQ

Fixes

[WMS-4736] – sys: fixed an issue with a partial playback of phrases in early media on WP490GR2 in case they were provisioned to Cloud PBXs

[WMS-5030] – wms: fixed an issue with impossibility to generate an audio file via TTS from Sounds menu in case text contained special characters (“&”, “<“, “>”)/ diacritics (ù, í); also added an error message in case text length is more than 400 symbols

[WMS-5082] – sys: fixed call drop issue in case a specific P-Asserted-Identity was configured for SIP trunk with US VoIP operator Clearfly

[WMS-5139] – sys: fixed an issue with Protocol Multiplexer crashing in case of immediate disconnection on port 443 after WMS version 3.88.41711.32

[WMS-5187] – sys: fixed an issue with missed call written to history of the last agent when using Call group strategy “Call All 32” (while call group manager received missed notification) after WMS release 3.88.41912.35

[WMS-5311] – sys: fixed an issue with Paging not working in case users of a Paging group had very long names and had many registered devices

[WMS-5317] – sys: fixed an issue in which in some cases incorrect response was played back with Dial by name via ASR in case of an empty recognition result

[WMS-5330] – sys: fixed an issue when in some cases push notifications sent via WebAPI were not delivered to Wildix Push server

[WMS-5353] – sys: fixed an issue with PBX engine crashing in case the command “voicemail update” was executed in console

[WMS-5405] – wms: fixed an issue with impossibility to access “Call and chat history” WMS page if an error occurred during installation/ updating CDR backend schemes after WMS version 3.88.42342.40

Firmware

[WMS-5387] – dev: new firmware for WP480G 2017 version 63.145.8.91, WP490G 2017 version 67.145.8.55

  • Added back audio quality indication 
  • Disabled the additional debug log to prevent phone from sending many UDP packets to the local IP 192.168.10.87

Version 3.88.42342.40 Date: 15.10.2018

Improvements

[WMS-5242] – sys: error notification in case of unreachable push.wildix.com server is now displayed in syslog

[WMS-5243] – sys: fixed an issue in which push notifications didn’t work after changing PBX serial unless it was rebooted

Fixes

[WMS-4632] – col: fixed an issue with GUI error message appearing after saving “Enable contact notes” option in WMS Settings -> PBX -> Call and chat history in case MSSQL backend was used

[WMS-4762] – col: fixed an issue with loss of chat messages (“Recents”) after refreshing the page or changing from Chrome browser to Firefox in case MSSQL backend was used

[WMS-5031] – col: fixed an issue in which it was impossible to remove “until date” in Collaboration using the feature “set presence” of another user

[WMS-5214] – sys: fixed incorrect call status on Firstel software after hangup of second simultaneous call (starting from WMS version 3.87.39863.52)

[WMS-5221] – sys: fixed an issue with PBX does not accepting incoming RTP packets from remote door phone which could result no audio/ video during a call

[WMS-5238] – wms: fixed an issue with CDR not working after changing MSSQL backend

[WMS-5263] – sys: fixed an issue with no video when calling from Kite to Collaboration after Beta release 3.88.42218.38

[WMS-5275] – sys: fixed an issue with accessing call history on WP4X0 due to extended Latin symbol “non-breaking space (” “)” not encoded in UTF8 in “dst” (destination) CDR column

[WMS-5316] – wms: fixed an issue in which it was impossible to log in to Collaboration in case ACL “Cannot view – Everybody” rule was added without any “Can view – Group” rule

Firmware

[WMS-5143] – dev: new firmware for W24FXS 2015 version 27.18.01.16
Fixed an issue in which one FXS user could not transfer a call back to the FXS user who originally made the call transfer

[WMS-5286] – dev: new firmware for W-PA version 2.1.1.3664
Increased the volume level of the device’s ringtone. Now it can be used as a ringtone amplifier, documentation: https://confluence.wildix.com/x/BQAVAQ

Version: 3.88.42218.38 Date: 01.10.2018

IMPORTANT: Changed Remote Support IP

The following IP ranges are now used by Remote Support server (make sure they don’t collide with your internal network ranges):

172.16.0.0/16
172.20.0.0/16
172.25.0.0/16

During the update to this version, there might be a delay of approximately 20 minutes due to changing of DNS records!

Please note that the certificates for remote support connection on old PBXs not upgraded from stable repository will be valid only until 1 May 2019! After this date remote support will be unavailable on PBXs which were not upgraded.

Improvements

[WMS-5052] – col: added support for line breaks in Notes field when importing phonebooks (WMS -> Users -> Phonebooks -> Import)

[WMS-5104] – sys: call group improvements: added timeout for pause on no answer, added call waiting option
Notes:

  • if previously used autopause on no answer with wrap up time, after upgrade instead wrap up time will be used default autopause time (5sec).
  • call waiting option is disabled for call strategy Call all: 32 or in case “Auto pause on no answer” is enabled
  • new options appear in WMS “Edit group” menu only after re-saving Call group settings

[WMS-5148] – dev: fixed a rare problem with lost subscription in failover scenario for WP4X0
note: already implemented for WP480G / WP490G r3 with the fw available in the previous WMS version – related ticket WMS-5079; for WP480(G) / WP490(G) r2 – with the fw available in the current WMS version – WMS-5107

[WMS-5224] – sys: call back for callgroups improvements

Details:

  • Value of the variable “ORIGINATE_TIMEOUT” is now accepted in seconds instead of milliseconds
  • Added an example of caller number validation to the documentation
  • Added an example configuration to the documentation that allows the caller to enter another number
  • Added to the documentation an example of setting “Moh” for the queue after the callback
  • Attached the file with the exported dialplan to the documentation.

documentation: https://confluence.wildix.com/x/wAmIAQ

[WMS-5244] – sys: centos support improvements for monit and storage device status visualization

Notes:

  • ps command from WMS now shows all processes for all users
  • Fixed an issue with infinite loader on storage page in case HDD was present without any partition

Fixes

[WMS-4902] – sys: fixed an issue when it was impossible to make more than one attended transfer of the same call using Feature Code #8 

[WMS-5028] – col: fixed phonebook issue in which contacts were not fully displayed in Collaboration in case one of contacts contained only a dot in its name

[WMS-5035] – col: fixed an issue in which it was impossible to write an SMS containing diacritics (ï î ë ê â) in Collaboration

[WMS-5113] – sys: fixed an issue with guest check-in info received from FIAS hotel software (Opera) not being updated on WMS side

[WMS-5144] – col: fixed an issue in which it was impossible to send SMS from Collaboration via HTTPS SMS Server in case WMS Network was enabled

[WMS-5147] – app: Fax Printer v. 2.0.7 (Windows) fixes an issue in which it was impossible to install Fax Printer on Windows 10

[WMS-5151] – app: Outlook Integration v. 2.3.5 fixes an issue with live search in Outlook contacts: search taking too long and newly added contacts could not be found

[WMS-5211] – sys: fixed an issue with bad quality of calls in case of WMS Network with PBX jitter buffer feature (WMS-3420)

[WMS-5212] – sys: added missing “and” audio file in Dutch language which in some cases caused wrong pronunciation of date and time in Voicemail

[WMS-5216] – app: Screen Sharing component (Windows) v. 3.1.8 fixes an issue with screen sharing freezing after some time on widescreen monitor

[WMS-5226] – sys: fixed an issue with duplicate call history entries in WP history in case of WMS network calls

[WMS-5231] – app: WiService v. 2.9.4 (Windows) fixes an issue with impossibility to open CDR-View due to the following error: Integration Service not responding

[WMS-5232] – sys: fixed an issue with no access to call history and phonebooks on WP4X0(G) 2015-2017 in some cases due to firewall block

[WMS-5236] – sys: fixed an issue with WP4X0 not being automatically upgraded after autoupdate of the PBX on 3.88.XX

[WMS-5241] – sys: fixed an issue with dialplan drop in case calling via empty trunk group

[WMS-5271] – sys: fixed an issue with custom application not working if it contained GotoIf, after WMS version 3.88.42042.36

New Firmware

[WMS-5107] – dev: new firmware for WP410 version 50.145.6.159, WP480(G) r2 version 55.145.6.108, WP490(G) r2 version 59.145.6.147, WP480G r3 version  63.145.8.89, WP490G r3 version 67.145.8.53

All models:

  • Fixed an issue in which WP couldn’t get IP address via DHCP with enabled DHCP 176 option
  • Fixed DHCP memory leak issue

WP490(G) r2:

  • Fixed an issue with incorrect translation of BLF labels “Line” after changing language in case more than 3 BLFs were set up

Version 3.88.42042.36 Date: 17.09.2018

Feature

[WMS-5135] – callback feature for call groups allowing customer to press DTMF to request a callback

Documentation: https://confluence.wildix.com/x/wAmIAQ

Improvements

[WMS-5115] – dev: improved audio headset and handset level of WP480 / WP490 2015

[WMS-5118] – sys: improved en-us pronunciation for ASR dial by name service

Fixes

[WMS-5023] – wms: fixed an issue with new changes in Dialplan configuration not being saved in some cases in case PBX upgrade failed

[WMS-5098] – wms: fixed an issue in which voicemail was converted converted to text even when option was disabled in WMS

[WMS-5122] – sys: fixed an issue in which in some cases user name wasn’t updated on WMS side after guest’s check-in using FIAS hotel integration

[WMS-5126] – wms: fixed an issue with HTTP proxy client crashing in case its host contained the word “proxy”

[WMS-5166] – col: fixed an issue when it was impossible to answer incoming call in Collaboration because no free ports were unavailable due to high load

Firmware

[WMS-5044] – dev: new firmware for WP410 r2 version 50.145.6.156

Changelog:

  • Fixed: BLFs names duplicating from the 2nd page to the 1st one and not working if user pressed “F1”&”F2” buttons.
  • Improved: use the “F1”&”F2” buttons as “line BLF” if no other BLF configured.
  • Fixed: incorrect translation of the BLF labels

[WMS-5079] – dev: new firmwares for WP480 r3 version 63.145.8.79, WP490 r3 version 67.145.8.46

Changelog:

  • Fixed: EchoCanceller 300ms mute issue (problem in which audio was absent during the first 3 seconds)
  • Fixed: incorrect translation of the BLF labels

Hotfix version 3.88.42041.36 Date: 07.09.2018

[WMS-5168] – wms: fixed an issue when it was impossible to save a TTS message in WMS -> Sounds -> Text-to-speech after upgrade to WMS Stable Version 3.88.41912.35


Version 3.88.41912.35 Date: 03.09.2018

Features

[WMS-5094] – wms: added Estonian translation

[WMS-5132] – dev: support new range for W-AIR Outdoor base stations

Improvements

[WMS-4580] – app: screen sharing component version 3.1.3 for Windows / macOS

  • Improved sync of screen sharing between viewer’s and streamer’s sides
  • Remote control turned off by default
  • Viewer can’t change streamer’s monitor and control settings without permission
  • Limitation for Windows 10: due to security protection popup window can’t be shown on top of another app

[WMS-4826] – app: improved operating speed of Outlook integration with new WiService and Outlook integration versions

[WMS-5083] – sys: improved Call group strategy “Call All 32” for WGW-HW / Cloud / VM

  • Available for all devices including Web phone
  • Reduced audio answer delay which was present in “Call All 32”
  • Reduced the current delay between members to 20ms for “Call All 10” and “Call All 32” to achieve almost simultaneous ringing
  • Previously this strategy supported up to 32 devices (each device of CG member was counted), from now on this strategy supports up to 32 users
  • User preferences (call forwarding, call waiting etc) are not processed when this strategy is used

Limitation: Feature “Contact Center” (Collaboration -> Settings ->  Contact center) doesn’t work for this strategy

Note: during upgrade of PBX, Configuration of Call All 32 strategy will be updated automatically

Fixes

[WMS-4993] – sys: fixed an issue when after deleting a voicemail message from Collaboration or WP, it was still present in directory

[WMS-5020] – col: fixed an issue in which image/ link preview in chat sessions was not displayed in case browser or server lost authorization

[WMS-5056] – sys: fixed an issue when incoming/ outgoing calls were dropped with Reason: 603 Declined in some cases if external lookup service was enabled (Worldwide Phonebook)

[WMS-5078] – col: fixed an issue with W-AIR Headset of the latest firmware being displayed as W-AIR (instead of W-AIR HS) in Collaboration after being assigned to a user

[WMS-4744] – col: fixed an issue with wrong display of missed events (in case events were answered from a different device) in Native App

Issue fixed with new Native App version–from now on only missed calls and chat events are displayed on badge, upgrade to this WMS version otherwise users will not receive badge notifications on current opened chat / contact.

[WMS-4809] – col: fixed an issue with wrong status of switches being displayed in Collaboration Function keys in some cases after PBX reboot

[WMS-5100] – sys: fixed an issue with “en” language sounds played instead of “en-us” after upgrade to WMS version 3.88.41708

[WMS-5103] – sys: fixed call drop issue when calling via Dialplan application “Voicemail access” with US VoIP operator Clearfly after upgrade to WMS version 3.88.41708


Version 3.88.41762.32 Date: 20.08.2018

New Feature

[WMS-4978] – sys: added support for exit code 0 from voicemail allowing caller to speak with an operator

How-to: add the letter ‘o’ to Dialplan context as called number–that is where the “0” key sends the caller.

Improvements

[WMS-4740] – app: new version of Fax Printer 2.0.6 increases the max number of pages per fax to 200 (also increased the timeout for fax sending)

[WMS-4801] – dev: added provisioning of DSCP QoS parameters for W24FXS 2015

[WMS-4858] – sys: changed priority for SMS sending: sms2http is used (configured in WMS Settings -> System -> Fax/SMS Server -> “CURL SMS send”); if it not configured or returns an error, then GSM gateway is used

[WMS-4882] – sys: uncompressed audio files are now used for for Voicemail recognition to improve the quality of Voicemail transcripts with STT (speech-to-text)

Fixes

[WMS-4822] – sys: fixed an issue with „ring only active device“ option not applied for incoming calls arriving via push to mobile apps

[WMS-4942] – conf: fixed an issue with occasional screen sharing freezing during videoconferences

[WMS-4976] – sys: fixed an issue with incorrect timezone on W-AIR headsets in case NTP Zone (WMS -> Devices -> “Edit device”) was changed to Europe/Tallinn

[WMS-4988] – col: fixed an issue in which popup URL did not work if it contained backlash „\“

[WMS-5010] – sys: fixed an issue with occasional wrong BLF status after attended call transfer of external call on WP4XX 2017 starting from release 3.88.40135.16

[WMS-4713] – sys: fixed an issue in which it was impossible to complete semi-attended transfer to call group from collaboration in some cases

[WMS-4854] – sys: fixed an issue with wrong missed call notification for queue member in case call timeout set for this user was less that call group timeout

[WMS-4928] – sys: fixed an issue with PBX sending multiple duplicated billing reports to Fidelio via FIAS hotel integration

[WMS-5004] – sys: fixed an issue in which it was impossible to recover PBXs with CPU Atom D525


Version 3.88.41708.32 Date 07.08.2018

Important: starting from this version the option DHCP 176 is reserved for VLAN configuration of phones, if your DHCP server provides this option disable it or make sure it contains the right VLAN for the phones. 

Improvements

[WMS-4761] – sys: increased default flash time of Flash Hook on W24FXS 2015 to 600s

[WMS-4766] – sys: improved the script responsible for disk space optimization

[WMS-4787] – dev: global daylight saving time rules are now used for DST settings on WP phones

[WMS-4788] – sys: from now on all dialplan operations are executed before applying return from blind transfer

[WMS-4792] – dev: from now on PRI gateways use timezone set on device (if not, timezone of the PBX) to make sure correct timestamp is displayed in syslog and time is correctly shown in the interface

[WMS-4793] – dev: improved “Line” Function key’s label for WP 2015-2017; now the label is always static (no running line for long names)

[WMS-4830] – wms: added config parameters “disable_sync_portal” and “disable_sync_manual” to disable devices sync

By default, the sync is enabled. It is necessary to disable it in case of FAILOVER scenario on Failover PBXs!
To disable it: add “disable_sync_portal=1”, “disable_sync_manual=1” to the config file /rw2/etc/pbx/device_sync.conf
Available values: 1 – sync is disabled; 0 – sync is enabled

[WMS-4862] – sys: prefix 058 added to „National“ call class for Switzerland to improve call class recognition and for the correct management of ACL permissions

[WMS-4874] – sys: Line keys are now displayed with default label “Line X” instead of “L_X”

[WMS-4901] – dev: increased jitter buffer for WP480G / WP490 2017 models starting from firmware version wp480gr3=63.145.8.71, wp490gr3=67.145.8.37.

The following values were hardcoded:
– Min. delay = 100/ Nominal delay = 200/ Max. delay = 400 – if jitter buffer values are default in WMS -> Settings -> SIP-RTP -> Jitter buffer
– Min. delay = 100/ Nominal delay = 300/ Max. delay = 500 – if max delay > 400 or average delay > 200

[WMS-4930] – sys: “en-us” language is now used for voice recognition for all English speaking countries

Fixes

[WMS-4419] – wms: fixed an issue with impossibility to access a device directly from WMS: after pressing “Connect” button, the link couldn’t be opened (regression introduced in WMS version 3.85)

[WMS-4487] – wms: fixed an issue with impossibility to perform backups via email (WMS Settings -> Tools and utilities -> Backup system -> Scheduled backups) in some cases

[WMS-4521] – col: fixed an issue in which a call couldn’t be transferred to a voicemail of the third user using drag&drop

[WMS-4551] – wms: fixed an issue when after the import of users via Active Directory, German language was not set if country code was Switzerland or Austria

Note: logic of importing user preferred language is described in https://confluence.wildix.com/x/pQU8AQ

[WMS-4573] – col: fixed an issue with no ringtone played back after 180 ringing with SDP

[WMS-4597] – wms: fixed an issue when dynamically added Call group member was removed from a Call Group after changing preferences in WMS/ Collaboration

[WMS-4698] – sys: fixed an issue with „en“ language sounds played instead of „en-us“ if “USA” was set as trunk Country Code

Current limitation: All trunks with “USA” Country Code should be re-saved.

[WMS-4703] – wms: fixed an issue in which it was impossible to import more than 496 contacts from Office 365

[WMS-4707] – wms: fixed an issue in which Remote support didn’t work if HTTP proxy client was enabled

[WMS-4734] – sys: fixed an issue in which PBX engine’s time was not updated after timezone change in
WMS Settings -> PBX -> Language & region

[WMS-4750] – wms: fixed an issue with hotline timeout parameter disappearing from WMS -> Users -> Edit preferences -> Settings after saving

[WMS-4755] – col: fixed an issue with empty “Recents” list in case of poor Internet connection or after PC waking from sleep mode

[WMS-4785] – col: fixed an issue when it was impossible to make a call to a number without a country code from some integrations since an external line prefix wasn’t added to a number

Note: integrations that use the following library were affected: https://github.com/Wildix/IntegrationService

[WMS-4791] – wms: fixed an issue with impossibility to save configuration of “Play sound” Dialplan application containing apostrophe (‚) in text (TTS) after WMS upgrade

[WMS-4800] – wms: fixed an issue with setting / updating of PBX geolocation

[WMS-4806] – sys: fixed an issue with replication script hanging on Failover setup in some cases

[WMS-4811] – sys: fixed an issue with PBX engine hanging during recreation of SQLite3 astdb backend in case it was corrupted or empty

[WMS-4842] – sys: fixed an issue with TAPI Firstel integration not working after upgrade to WMS version 3.88.41047.25 due to incorrect Call ID after a call was redirected to Agent Station

[WMS-4843] – sys: fixed an issue with wrong voice prompt when calling user in DND due to TTS file generation instead of playing pre-recorded audio file

[WMS-4869] – wms: fixed an issue with no audio and call drop after 32 seconds on Cloud PBX after upgrade to WMS 3.88.41067 for calls made from Android/ iOS mobile app to Collaboration

[WMS-4889] – sys: fixed an issue with Web phone not appearing in device selection list of Collaboration in some cases

[WMS-4914] – sys: fixed an issue with possible PBX engine deadlock in Failover scenario

[WMS-4987] wms: fixed an issue with redirect to page “reboot” with progress bar after WMS Upgrade

Firmware

[WMS-4852] and [WMS-4949] – dev: new firmware for WP4X0

Versions:

WP410=50.145.6.152
WP480r2=55.145.6.106
WP490r2=59.145.6.146
WP480r3=63.145.8.75
WP490r3=67.145.8.44

Changelog:

  • Fixed the stuttering of RTP-stream every 2 min duration of 280 milliseconds (480gr3/490gr3);
  • Increased a ringtone volume on the wp 480gr3 and 490gr3;
  • Added support of the custom DHCP option 176. Applying the Voice VLAN Tag offered by DHCP.
  • Added support of the custom DHCP option 43. Autoprovisioning using the autop. URL offered by DHCP.

How to set up a DHCP server for these options:

  • for VLAN DHCP option such parameters should be set on dhcp server:
    ‚176‘ – the number of DHCP option
    ‚L2Q=x,L2QVLAN=yyyy‘ – DHCP option of parameters
    x – 1 or 0 (enabled or disabled)
    yyyy – VLAN tag ID (for ex. 100)
  • for Autoprovisioning using autoprovisioning URL:
    ’43‘ – the number of DHCP option
    https://domail_or_pbx_ip:port/?action=setaps – autoprovisioning url

Note: if phones do not sync automatically during 30 min after PBX update, do it manually in WMS -> Devices (select the phones and click „Configure/sync“)


Hotfix version 27.07.2018

Package wildix-cw-0.88.41145-5:

[WMS-4689] – col: fixed wrong voicemail notification in some cases when users dials one’s office number


Version 3.88.41148.25 Date: 20.07.2018

Improvement

[WMS-4240] – col: increased limit of monitored users in Collaboration to 600

Hotfixes

[WMS-4445] – wms: wideband codec option, if enabled in SIP-RTP menu, is no longer disabled automatically after each PBX upgrade

[WMS-4711] – sys: fixed a rare issue with extended Latin symbols not encoded in UTF8 could create issues with accessing phonebook / history on WP4X0

[WMS-4731] – sys: fixed an issue with feature codes not working in case the sound package for the language selected by user was not installed


 

Update repository: rel380

Version 3.88.41047.25 Date: 22.06.2018

[WMS-4737] – col: fixed a problem with Google maps access from Collaboration


Packages: Dialplan 1.0.88.41070, LUA-base 1.0.88.41070 Date: 19.06.2018

[WMS-4726] – sys: fixed an issue with provisioning of new devices not working starting from provisioning package ver. 1.0.88.41086


Provisioning package 1.0.88.41086 Date: 18.06.2018

[WMS-4708] – dev: fixed an issue with random call drops and loss of SIP registration on a local W-AIR base connected via UDP (base station’s LED was blinking red in such cases)


Version 3.88.41047.24 Date: 15.06.2018

New Feature

[WMS-4572] – wms: added support for “Cid Name via Facility IE” (previously “Additional services”) feature in BRI/PRI trunk settings, that enables calling name delivery for US and Canada

Improvements

[WMS-4503] – sys: decreased a number of requests to WBI service (license is now checked at PBX level)
[WMS-4618] – dev: option „Correct incoming calling numbers“ on BRI/PRI trunk settings page (WMS -> Trunks -> BRI/PRI) is now longer applied for trunks with the USA country code: 0/ 00 are not added to national/ international incoming calls
[WMS-4653] – sys: option “Auto add new devices in local networks” (WMS Settings -> PBX -> SIP-RTP) is now enabled for 2 hours after which it is automatically disabled
[WMS-4654] – wms: removed option “Require provisioning password in local networks” from SIP-RTP page; now authorization is always required

Fixes

[WMS-4367] – col: fixed an issue with CDR-View exporting xls/ csv files containing „NaN“ values instead of numbers and impossibility to open xls via Microsoft excel
[WMS-4420] – sys: fixed an issue when it was impossible to answer a video call from 2N door phone on web phone with Chrome version 67 (stable) on Mac OS and 67 (stable)/ 68 (beta) on Windows
[WMS-4507] – sys: fixed an issue with call tags set up via Dialplan not displaying in CDR-View in case a call was placed to a Call group and then transferred with attended transfer
[WMS-4647] – wms: fixed an issue in which remote support didn’t work in some cases when using HTTP proxy client
[WMS-4691] – dev: fixed an issue with PBX hanging up calls after some time on some W-AIR bases


Version 3.88.40902.23 Date: 12.06.2018

New Features

[WMS-4327] – wms: added status icon for Vision phone assigned to a user (WMS -> Users)

[WMS-4375]- dev: username is now displayed next to the extension number label on WP2015-2017 (the top part of the screen)
Note: To show only the extension number (old behavior), use a provisioning parameter “DisableShowUsername”, check documentation for details: https://confluence.wildix.com/x/KQg8AQ

[WMS-4377] – col: added ability to select the application to share via screen sharing on Windows

[WMS-4400] – col: added ability to select the application to share via screen sharing on macOS
How-to:

  • Update screen sharing component from Collaboration Settings -> Extensions
  • Start a screen sharing session
  • From the menu bar, click on Screen Sharing Manager -> Applications and select which application to share

[WMS-4488] – sys: added support for q-value (serial forking) parameter via custom register string
How to:

Copy registration line for some trunk from /etc/callweaver/sip-registration.conf (Example: register => 144?144:123456:”144″@10.168.0.144:5060)

  • Uncheck “Enable registration” option in Trunk Settings (WMS -> Trunks)
  • Add new line into /etc/callweaver/sip-general-custom.conf

register => 144?144:123456:”144″@10.168.0.144:5060~~0.6 (where 0.6 is q-value)

  • Run callweaver -rx “sip reload”

[WMS-4508] – sys: added support for dial by name using ASR (Automatic speech recognition) BETA version
Feature is available only for:

  • Per user systems (feature not available for lifetime PBXs) with Premium license
  • “en” or “en-us” languages

It can be called via “Dial by name/ Directory” Dialplan application or Feature code “Directory” 82.
Available also for W-AIR Headset (press the Call button when there is no active conversation and say the name).
Feature is enabled by default. To return to the old behavior (entering name via DTMF), use these global Dialplan variables:

  • IVR_ASR (yes / no, default = yes) for Dialplan application
  • IVR_ASR_SERVICES (yes / no, default = yes) for Feature code

[WMS-4589] – sys: added support for normalization of caller ID for incoming calls from trunk with USA country code

  • 11 digits or more, with first digit that is different from 1: if starts with 011, 011 is removed and replaced with + or otherwise + is added
  • 11 digits starting with 1: + is added in front
  • 10 digits: +1 is added in front

Improvements

[WMS-4288] – wms: improvement for processing WebAPI requests

[WMS-4291] – col: improved loading of chats from “Recents” section
Now chats from “Recents” section are also stored in browser cache besides being stored in the PBX DB which helps reduce time needed for loading

[WMS-4362] – sys: TTS services (TTS Lite, Dynamic TTS in Dialplan, user status reporting via TTS) are now available also on Hardware and Virtual PBXs Per User PBXs with Premium license (with Monthly / Yearly / Five year subscription)
Documentation has been updated: https://confluence.wildix.com/x/3QM8AQ

[WMS-4370] – sys: DNS server via firewall is now disabled by default (DNS queries from public IP and non-private networks will be blocked)
Limitation: PBX cannot be used as DNS server from remote network
Documentation: https://confluence.wildix.com/x/DQCIAQ

[WMS-4435] – wms: improved domain whitelist support: now it is possible to add patterns using asterisk symbol (*) that replaces letters, numbers, and dashes
Examples: https://*.wildixin.com; *://*.wildixin.com; https://*.*.wildixin.com
[WMS-4491] – app: decreased delay for mobile apps chat push notifications to 30 seconds
[WMS-4566] – sys: improved quality of voicemail transcription using Speech to Text (STT) service
[WMS-4583] – sys: added global Dialplan variable “FILTER_183180nosdp” to solve no ringback issue with some UK VoIP Operators
Dialplan variable can be also used in Dialplan before “Dial the trunk” application: add “Custom application” and enter into the field: Set(FILTER_183180nosdp=1)
[WMS-4617] – dev: the volume of the microphone in handsfree mode has been tuned for WP480G/WP490G 2017

Fixes

[WMS-4055] – sys: fixed one way audio issue when switching active device from Web to Android Mobile app using Continuity in case devices were located in the different networks
[WMS-4162] – fixed an issue with call being rejected in some rare cases when it was placed to a user with Mobility via SIP trunk with configured CID Header “P-asserted-Identity”/ “P-Preferred-Identity” in SIP Trunk Settings nder certain circumstances
[WMS-4254] – sys: fixed an issue when after changing music on hold class in WMS -> Settings -> PBX -> SIP-RTP -> “Default music on hold”, PBX engine continued to use the previous class settings until it was restarted
[WMS-4259] – wms: fixed an issue when it was impossible to set netmask for gateways using /31-bit prefixes on IPv4 Links (WMS -> Settings -> System -> Network -> Routing and gateways)
[WMS-4260] – fixed an issue when after semi-attended transfer call from Collaboration to Call Group with “Call All 10” strategy was answered by a target agent, a transferee was still on hold and other Call Group members had incoming call
[WMS-4331] – sys: fixed an issue with diacritics (accented characters and umlauts) not being displayed correctly in email notifications about new chat messages
[WMS-4336] – sys: fixed an issue with email report on the status of SMS sent over HTTP containing Chinese characters in the message body
[WMS-4337] – col: fixed an issue in which certain files containing spaces and digits in their names were sent over chat as HTML text and thus could not be opened
[WMS-4356] – col: fixed an issue in which it was possible to view/pick up user’s call via a Function key even in case it was was forbidden by ACLs “cannot” – “View calls of users” and “cannot” – “Call Pickup”
[WMS-4373] – col: fixed an issue with impossibility to send HTML <script> tag via Collaboration chat message
[WMS-4376] – col: fixed an issue in which hyperlinks containing “<…>” characters were not displayed correctly in chat and were not clickable
[WMS-4389] – sys: fixed an issue with impossibility to verify some SSL certificates using cURL parameters in Dialplan -> “Custom application”
[WMS-4390] – sys: fixed an issue in which a Timetable created for a specific year continued to work after that year has finished (the value in the field “year” was automatically changing to “any” on January 1)
[WMS-4393] – sys: fixed an issue with Feature Codes not working in case users had popup URL with specific configuration (double quotes)
[WMS-4398] – kite: fixed an issue with incorrect presence status of remote users in WMS Network in some cases
[WMS-4432] – col: fixed an issue in which a new incoming message in “Recents” was no longer highlighted in case a user who has received the message but not read it yet, started a new chat session with another colleague from roster via mobile app
[WMS-4437] – wms: domain names containing hyphen symbol are now accepted in domain whitelist under Security tab
[WMS-4443] – col: fixed an issue with impossibility to export charts from CDR-View
[WMS-4459] – sys: fixed an issue with impossibility to select device in devices list in case of high number of push devices and small cloud instance
[WMS-4489] – col: fixed an issue with infinite loading of chat history if PBX user received a new message from Kite user
[WMS-4500] – sys: fixed an issue with PRI gateways not working with some US VoIP operators because default status codes were limited to 1-126 instead of 1-127
[WMS-4502] – col: fixed incorrect sequence of chats in “Recents” upon the first login in incognito mode
[WMS-4504] – sys: fixed an issue with impossibility to playback a message via TTS Dialplan application (Play sound/ Play sound and wait for digits) in case the message contained apostrophe symbol
[WMS-4513] – sys: fixed an issue with impossibility to save user’s preferences (WMS -> Users -> “Edit preferences”) in case predefined status message contained square brackets
[WMS-4520] – wms: fixed an issue when it was impossible to log in Collaboration in Firefox browser in case custom external secure port was different from 443
[WMS-4535] – sys: fixed an issue with impossibility to execute sync_pbx failover script under admin rights
[WMS-4563] – sys: fixed an issue in which Call group members that changed DND statuses back to Available, could receive a call not earlier than the timeout set for the Call group was reached
Notes:

  • “Unavailable on away / dnd” option must be disabled (Collaboration -> Settings -> Contact center)
  • Works only for “Call All 10” Strategy

[WMS-4579] – sys: fixed an issue with no free space on PBX after some time in case Failover scenario was configured
[WMS-4587] – wms: fixed an issue with no ringback tone for calls from trunk to trunk (calls from and to TDM network) with Swisscom operator sending 183 session progress
[WMS-4596] – sys: fixed an issue with Dialplan application “Play sound” generating a TTS message instead of playing the selected ringtone (even if the audio file was present in the Sounds directory)
[WMS-4602] – sys: fixed an issue with call history not displaying on WP phones in case MSSQL instance was used as CDR backend
Note: This version also fixes an issue in which after switching to MSSQL Database it was impossible to use Web phone and users’ pictures and calls in Call history were flashing in browser window [OTRS 2018052310000253]
[WMS-4606] – sys: fixed an issue with SIP Proxy removing q-value parameter from custom register string (added in WMS-4488)
[WMS-4610] – sys: fixed an issue with personal data rotation not deleting the data evenly for all users
[WMS-4612] – col: fixed high CPU load when accessing Collaboration via Chrome 67 on macOS
[WMS-4614] – col: fixed an issue in which voicemail notifications displayed wrong number of voicemail messages in Collaboration and WP in some cases
[WMS-4631] – sys: fixed an issue with devices failover by DNS not working in case Cloud PBX was used as Main PBX

Firmware

[WMS-4556] – dev: new FW 59.145.6.144 for WP490G 2017 fixes an issue in which phone could not receive IP address from DHCP server in case of using tagged VLAN


Date: 21.05.2018

WP4X0 firmware package downgraded to 59.145.6.137

Firmware version 59.145.6.143 was removed due to an issue in which phones with a configured VLAN could not get IP address after firmware upgrade.


Date: 16.05.2018

[WMS-4473] – dev: new firmware for: WP410r2 – 50.145.6.150, WP480gr2 – 55.145.6.104, WP490gr2 – 59.145.6.143, WP480gr3 – 63.145.8.48, WP490gr3 – 67.145.8.20

What’s new:

All models:

  • Fixed an issue with auto-provisioning via WMP not working: default URL was corrected
  • Fixed wrong user status in some cases in failover
  • Fixed multicast-paging issues: now phones send and receive only packets with audio
  • Fixed a beep sound at the end of paging
  • Improved the procedure of registrations and subscriptions (BLF, statuses, VM notifications) in failover scenario

WP480GR3 and WP490GR3:

  • Fixed one way audio issue in some cases
  • Fixed an issue with dial tone settings do being applied (custom tones)
  • Fixed an issue in which user who put the call on hold could hear the noise from the speaker or handset instead of silence
  • Fixed an issue with some custom ringtones being followed by clicks
  • Improved echo cancellation while using the handset

Date: 11.05.2018

[WMS-4495] – sys: fixed an issue with slow in handling of calls using WP4X0(G) in case of many incoming SIP notifies (e.g. over 30 BLF keys configured)
Note: WP firmwares were rolled back to the latest unaffected version; the following features from WMS-4395 were rolled back:

  • Fixed the multicast-paging issues: now phones send only packets with audio
  • Improved the procedure of registrations and subscriptions (BLF, statuses, VM notifications) in the failover scenario

WP4X0 firmware Date 03.05.2018

[WMS-4395] – dev: new firmware for wp410r2 – 50.145.6.148, wp480gr2 – 55.145.6.99, wp490gr2 – 59.145.6.138, wp480gr3 – 63.145.8.38, wp490gr3 – 67.145.8.12

All models:

  • Fixed the multicast-paging issues: now phones send only packets with audio
  • Improved the procedure of registrations and subscriptions (BLF, statuses, VM notifications) in the failover scenario
  • Improved DHCP and NTP synchronization
  • Added support of IEEE 802.1x Standard
  • When “Menu” soft-key is hidden (ACL rule) – the user will not be able to change the volume of the ringtone

WP480GR3 and WP490GR3:

  • A new audio SDK was configured and applied, the following problems were solved after applying the new audio SDK:
  • Improved echo cancellation
  • Improved jitter buffer
  • Fixed an issue with voice prompts played partially using some Feature Codes on WP4X0 phones
  • Fixed an issue when during a conversation in the “handset” mode, user could hear a short sound after putting the handset back on the hook
  • Fixed an issue with one-way audio
  • Fixed an issue when the ringtone was followed by clicks

*** WMS Release Version 3.88 ***

Important note: old stable version 3.87 is available from repository rel380_87

Version: 3.88.40135.16 Date: 20.04.2018

Features
[WMS-3420] – sys: improved quality of calls in case of jitter
Jitter Buffer is now enabled by default on the PBX side (callweaver works as jitter buffer) which allows to improve overall quality for SIP trunks calls, voicemails and call recordings
[WMS-3458] – sys: added support for transcoding for web phone calls to trunks which do not support G711
Important

  • It’s not recommended to enable this feature, as it reduces call quality and generates useless load on CPU
  • It must be enabled only if the operator doesn’t support g711a/u for some calls
  • It can generate CPU overload and problems if too many calls use it; in this case it is recommended to use another operator which supports all the needed codecs ( g711a / g711u / g729)
  • Feature is supported only on PBXs with modern CPU or Cloud
  • To enable g729 transcoding, edit the file /etc/callweaver/sip-general-custom.conf:
    [general]
    g729_transcoding=yes

[WMS-3514] – wms: support of SMS sending via HTTP without GSM gateway
Added new parameters to Fax/SMS server page in WMS allowing you to enable CURL SMS sending; click the question mark below the field to view the prompt and parameters which can be passed; feature works for scenarios in which no GSM gateway is registered
[WMS-3900] – wms: added support for random playback of music on hold (new parameter added to SIP-RTP page)
[WMS-3901] – wms: added phonebook ID and the possibility to delete all contacts from the phonebook in WMS -> Users -> Phonebooks
[WMS-3985] – wms: added option to support domain whitelist which helps to protect PBX from cross-site request forgery (CSRF) attacks (WMS -> Settings -> PBX -> Security)
IMPORTANT: Trusted domains must be added to domain whitelist! Please note that any Web API / PBX API integration will stop working if the domain is not added; Documentation: https://confluence.wildix.com/x/SwBuAQ
[WMS-3987]- wms: added option to enable remote syslog in addition to local syslog (WMS ->Settings -> System -> Remote syslog)
Documentation: https://confluence.wildix.com/x/aQc8AQ
[WMS-4084] – wms: added option to auto-delete old chats (new parameter added to Call and chat history page)
[WMS-4090] – wms: added option to auto-delete old voicemails/recordings (new parameter added to Call and chat history page)
[WMS-4144] – wms: added a new ACL – cannot/can use extensions in Collaboration (Collaboration -> Settings -> Extensions)
[WMS-4308] – sys: added a provisioning parameter “EnableMWISubscribe” to enable voicemail LED notifications on W24FXS 2015 in provision.conf
The parameter is disabled by default; documentation: https://confluence.wildix.com/x/KQg8AQ

Improvements

[WMS-3855] – wms: improvements of speed and reliability of devices scan performed during automatic provisioning
[WMS-3867] – col: visual and graphical improvements of video call dialog
[WMS-3883] – col: fixed an issue in which links containing HTML entities, when pasted in chat were not clickable
[WMS-3905] – wms: speeded up saving of large dialplan procedures
[WMS-3908] – wms: dialplan debug is now always active
[WMS-3909] – sys: user busy / unavailable Voicemail greeting is now played instead of a standard one if present
[WMS-3980] – sys: Ruben is now used as default voice for NL in TTS dialplan application (Play sound / Play sound and wait for digits)
[WMS-3981] – sys: it is now possible to set voice via variable for TTS dialplan application (Play sound / Play sound and wait for digits)
“Set” – TEXTTOSPEECH_VOICE (enter this value manually into the input field) – Lotte (or any other voice present in Sounds menu -> Text-to-speech); Documentation: https://confluence.wildix.com/display/DOC/Dialplan+applications+Admin+Guide+-+English#DialplanapplicationsAdminGuide-English-Playsound
[WMS-3984] – wms: added secure parameters in cookies to prevent them from being transferred over HTTP
[WMS-3986] – wms: logins / logouts are now written to syslog (remote IP, port, username, auth method, login / logout – all this info is now written to syslog)
[WMS-4168] – wms: added option to assign unprovisioned devices to users
note: available only for devices added via Remote Provisioning (Semi-automatic mode) or WMP
[WMS-4175] – sys: “followed by the pound” has been added to welcome message of Dial by name feature
[WMS-4176] – dev: it is now possible to set static DNS servers in WMS -> Devices for WP 4X0 2015-2017 without static IP
[WMS-4198] – col: graphical improvements of chat transcript dialog
[WMS-4208] – wms: PBXs in WMS Network are now referred to as Server / Clients (changed verbiage)
[WMS-4209] – col: improved live search in case user enters two words into the live search field (e.g. Name and Surname or Name and a part of Surname)
[WMS-4242] – wms: improved support of Spanish accented letters (á, í, ó, ú, ñ, ü, ¿, ¡,) in phonebook on W-AIR Handset
[WMS-4275] – sys: removed underscores used instead of spaces on WP4X0 2015-2017 for BLF keys “Colleague”/ “Speed Dial”/ “Park Location”/ “Send DTMF”
[WMS-4293] – col: improved chat history processing
this improvement minimizes the risk to lose a chat message due to connection / disconnection
[WMS-4295] – sys: added SIP Proxy logging for GDPR compliance (information about new SIP registrations is now logged with default debug level)
[WMS-4360] dev: re-enabled the feature “blinking state of Colleague BLF when the monitored user is in conversation + is receiving an incoming call” on WP4X0 2015-2017
Colleague BLFs blink in case the monitored colleague who is already in conversation is receiving a second incoming call

Fixes
[WMS-3439] – col : fixed an issue with unknown names in history of notes that could appear in case contact was deleted
[WMS-3882] – col: fixed an issue in which users which were selected in Edit Colleagues menu remained selected after they were removed from Roster
[WMS-3884] – wms: fixed an issue in which user could log in to Collaboration using Office 365 / Google sign-on even if the option “allow only single sign on” for AD / Domino was enabled
If the option “Allow only single sign on” is enabled, users can log in only using their Lotus Domino / Active Directory password
[WMS-3890] – sys: fixed an issue with “Call and chat history” menu displaying a blank page in case of missing permissions to create table using MSSQL database
[WMS-3895] – sys: virtual / Cloud PBX becomes unreachable after recovery procedure applied in Console menu starting from WMS 3.86; Important: do not perform Recovery Procedure on Virtual / Cloud systems on WMS 3.86 – 3.87; in WMS 3.88 possibility to run Recovery procedure on Virtual / Cloud systems has been blocked!
[WMS-3906] – col: fixed an issue with files sent via chat were shown immediately as read
[WMS-3916] – sys: one way audio after switching active device from web to WP using Continuity during a call between users who enabled direct-rtp in Collaboration on Windows PC
[WMS-3934] – col: fixed an issue in which multiple links to download call recording were generated in CDRview for calls to queue recorded via Dialplan (using “Record call” and “Call group” dialplan applications)
[WMS-3946] – wms: fixed an issue in which ACL – cannot access menu – Users: PBXs restricted a user from being able to perform search Users Menu
[WMS-3959] – wms: fixed an issue with reason field of “Hangup” dialplan rule getting unselected after PBX reboot
[WMS-4028] – col: fixed an issue with duplicated devices under Continuity option in Collaboration call dialog
[WMS-4036] – col: fixed an issue in which it was impossible to call numbers copied from macOS contacts into Collaboration
[WMS-4043] – wms: fixed an issue with impossibility to access menu Call and chat history due to an incorrect symbol added in global variables in Dialplan General settings
[WMS-4045] – col: fixed an issue with loader displayed forever in live search after starting to enter a part of the name
[WMS-4047] – col: fixed an issue in which it was impossible to scroll down to the beginning of the chat in some rare cases when image preview were present in chat conversation
[WMS-4049] – col: fixed an issue with call history not displaying caller name set via dialplan if contact was not found in a phonebook since 3.87
[WMS-4078] – wms: fixed an issue with basic authorization window displayed (instead of redirection to Login page) on trunks/devices/ports pages in case user lost session
[WMS-4085] – сol: password change and saving issues
Fixed an issue in which it was impossible to change password on Firefox and other minor fixes
[WMS-4086] – sys: fixed an issue with Forced Call forward (Call forward All) feature status not updated on phone screen after it was changed in user preferences via WMS
[WMS-4087] – sys: fixed a crash of ejabberd in case member with invalid extension was added to call group
[WMS-4110] – col: fixed an issue with Popup URL losing tag information in Safari in case of call pickup (in case Popup URL was enabled for outgoing calls on “Call generation”)
[WMS-4114] – col: fixed an issue in which user couldn’t log in to Collaboration in case trying to log in via HTTP after first login via HTTPS
User was redirected to login page after entering correct login and password; from now on user is prompted to login via HTTPS

[WMS-4143] – wms: fixed incorrect link to PBX in the welcome email in case custom secure port was different from 443
[WMS-4160] – sys: fixed an issue with incorrect RTP ports range after reset of Cloud PBX to factory settings
[WMS-4163] – wms: fixed an issue in which it was impossible to save SIP-RTP settings if access to WMS was made via WMP
[WMS-4173] – sys: fixed an issue in which it was impossible to view calls in call history of Collaboration using MSSQL with instance as CDR backend
Documentation: https://confluence.wildix.com/display/DOC/WMS+Settings+Menu+Admin+Guide+-+English#WMSSettingsMenuAdminGuide-English-Callandchathistory
[WMS-4178] – col: fixed an issue in which calls through external SIP carrier that sent 183 (session progress) and 180 (ringing) generated two ringing tones via web phone
[WMS-4196] – col: fixed an issue in which video conference invite messages remained unread for the system in case user was logged in via Mobile app
Fixed a behavior with invite messages from Kite user / video conference which were read by user via Collaboration were still sent by email / via Push notification
[WMS-4203] – wms: fixed an issue in which remote support couldn’t be reloaded in case HTTP proxy client was enabled
[WMS-4212] – col: fixed an issue in which in some cases users statuses did not change from busy to available in WMS network in case “admin” user did not have an extension
[WMS-4224] – col: fixed an issue in which ACL rule “cannot set” – personal information” prevented user from being able to change user status starting from WMS verison 3.87.39381.52
ACL rule “cannot set” – “personal information” doesn’t allow user to change personal information in Collaboration Settings – Personal (the tab is hidden), but allows changing user status
[WMS-4228] – sys: fixed an issue with some sounds in NL package not being found (when calling Voicemail) due to wrong file names
[WMS-4236] – col: fixed an issue in which it was impossible to answer incoming call from pop-up window if access to Collaboration was performed using URL link in the old format (/cticonnect)
In case access is performed via the link in format /cticonnect – added auto redirect to /collaboration
[WMS-4244] – sys: fixed an issue with fast navigation in phonebook on WP4X0 2015-2017 by pressing the numpad-keys not working in case there was no record beginning with the 1st letter on the num-key (issue introduced in WMS version 3.87)
[WMS-4229] – sys: fixed an issue with muted incoming audio from 2N door phone on web phone with Chrome version 64.0.3282.186
[WMS-4262] – sys: fixed an issue with feature codes “make up room” and “remove alarm clock” not working starting from WMS release 3.87.38290.52
[WMS-4265] – col: fixed an issue in which it was not possible to view more than 100 phonebooks in Collaboration
[WMS-4266] – wms: fixed an issue with impossibility to download audio files from Sounds menu if access to WMS was made via WMP
[WMS-4267] – sys: fixed an issue with wrong call distribution in call groups using the strategy “Fewest Calls” when not all group members received calls
[WMS-4272] – sys: fixed an issue with W24FXS Media Gateway losing SIP registration in case Failover scenario was configured
[WMS-4297] – sys: fixed an issue causing delay of trunk calls in case of network problems with external lookup service enabled (no internet connection, unavailable DNS server etc)
[WMS-4306] – col: fixed an issue with chat database connectivity when it is configured as a cluster
[WMS-4311] – sys: fixed an issue when W-AIR Headset couldn’t get a pairing code in case Dialplan context “login-emergency” contained “pbxinternal” in Included procedures
Note: ”pbxinternal” has been removed from Included procedures for “login-emergency” context; in case users need to call other extensions without device registration, administrator must add corresponding extensions/patterns to “login-emergency” manually
[WMS-4319] – wms: fixed an issue when auto upgrade and reboot of all the devices wasn’t performed after PBX upgrade
Note: This feature was added in WMS-3719
[WMS-4343] – col: fixed an issue in which chats with users disappeared from the “Recents” section in some cases
[WMS-4371] – sys: fixed call drop issue in case of receiving 15 simultaneous calls via SIP trunk in Call Group with strategy “Call All 32”
[WMS-4387] – dev: fixed an issue when WP480G-490G phones were unavailable to make outgoing calls due to failed Database update after check sync in case Failover scenario was configured

Firmware
[WMS-3778] – dev: firmware for W-PA
Documentation: https://confluence.wildix.com/x/BQAVAQ
[WMS-3954] – dev: new firmware for GSM gateway – it is now possible to send SMS in case PBX domain name contains up to 31 symbols (previously it was limited to 30 symbols)
[WMS-4250] – dev: new firmware for W-AIR system version 04.10.00.03

  • Fixed: “Man down” alarm stops working after some time; + additional fixes for “Man down” alarm
  • Fixed: calls are not possible after Ethernet has been disconnected / connected several times
  • Fixed: pressing Headset off hook / on hook button ends the 1st call instead of the 2nd call
  • Repeaters can now be registered even if Access code is different from default 0000
  • Fixed missing audio after upgrade to version 04.00.00.02 in case of using VLAN + direct RTP
  • Improved DECT tree algorithm
  • Fixed: incorrect logs on the side of the called party in case called party rejected the call
  • Fixed: no SIP registration after Ethernet has been disconnected / connected on W-AIR Small Business

Hotfix version 12.04.2018
Fixed too high volume and distorted audio on the headsets connected to WP
Important: it is necessary to re-provision phones after PBX upgrade


Hotfix Version 3.87.39863.52 Date: 26.03.2018

[WMS-4234] – sys: fixed call drops under high load with remote called id lookup service was active
[WMS-4257] – col: fixed one way video issue in case video was initiated by the client whose phone does not support video (regression, issue was fixed in WMS version 3.85 with WMS-2731)


Version 3.87.39810.52 Date: 21.03.2018

Fixes

[WMS-3764] – sys: fixed an issue with incorrect semi-attended transfer made by web phone user to user with mobility
[WMS-4183] – sys: fixed a rare issue in which calls were not terminated correctly, which could lead to PBX not being able to receive more calls after upgrade to WMS version 3.87.39178.52
[WMS-4205] – sys: fixed Wildix Alert Call system that stopped working as expected starting from WMS version 3.86
Github developer documentation updated: https://github.com/Wildix/Alert-call
[WMS-4097] – sys: fixed a rare issue with PBX engine restart when using call group strategy “Call all: 32” with WMS version 3.87.39178.52
[WMS-4214] – col: fixed wrong format of date during search in call history using MSSQL backend starting from WMS version 3.87.39529.52
[WMS-4241] – col: fixed an issue with Collaboration not receiving the list of user features after changing the password from Collaboration
[WMS-4248] dev: new firmware for W24FXSR 2015 version 27.18.01.15
fixed an issue in which device’s model was displayed incorrectly in WMS after one of FXS ports went down

Other – Conference

[WMS-4002] – conf: added support for audio conference in Safari 11


WP4X0 firmware Date: 15.03.2018

[WMS-4197] – dev: new firmware for WP410 50.145.6.143, wp480(G) 2015 55.145.6.97, WP490(G) 2015 59.145.6.136, WP480G 2017 63.145.7.247, WP490G 2017 67.145.7.114
Fixes an issue in which BLF could get stuck and start displaying incorrect colleague status (busy) after several days; it’s necessary to „Configure / sync“ phones after updating to this version


Hotfix Date: 08.03.2018

SIP Proxy V. 5.0.3.87.39601

[WMS-4127] – sys: fixed a rare issue in which 2nd incoming call was not delivered to mobile apps in case first call via push was canceled after several seconds

[WMS-4193] – sys: fixed an issue in which PRI gateway could stop working correctly (impossible to place outgoing calls; incoming calls with one way audio) when in failover mode after a temporary connection interruption

Provisioning package 1.0.87.39636
[WMS-4185] – sys: fixed an issue with W24FXS 2015 unable to connect to PBX when in Failover mode in some cases


Hotfix Version 3.87.39529.52 Date: 01.03.2018

[WMS-4121] – sys: additional fix for rare incorrect BLF state (off) for a user who was in conversation for a long time (more than 5-10 minutes)
[WMS-3933] – sys: fixed an issue with remote W01-2FXS unable to make SIP registration on Cloud PBXs, introduced starting from WMS release 3.86
[WMS-4087] – sys: fixed a crash of ejabberd in case member with invalid extension was added to call group
[WMS-4132] – sys: fixed an issue with queue member changing status from available to away in some cases after terminating a call on a call group
[WMS-4174] – sys: fixed an issue with call interruptions on local PRI gateway with non-standard network address after upgrade to stable release 3.87.39381.52


WMS Version 3.87.39381.52 Date: 22.02.2018

New Feature

[WMS-4124] – sys: added support for Android mobile app connected over T-Mobile 4G network

Improvement

[WMS-4092] – sys: added the possibility to disable silent ringtone for the second incoming call
Added the possibility to disable silent ringtone for the second incoming call via global Dialplan variable CW_SILENT_RINGTONE=no (default value is set to “yes”)

Fixes

[WMS-3965] – col: fixed an issue with tag information disappearing from Popup URL in case of call pickup
[WMS-4014] – sys: fixed an issue with playback of sound files in case sound folder name contained space, starting from WMS release 3.87
[WMS-4054] – sys: fixed an issue with VIA-based HW PBXs being unable to initialize storage USB drive from scratch starting from WMS release 3.87
[WMS-4058] – sys: fixed an issue with BLF keys displaying wrong user status in case a queue call arrived from number that matched the office number of user
[WMS-4094] – wms: fixed an issue with DHCP server page
[WMS-4095] – sys: fixed incorrect BLF state in case of caller name was longer than 69 symbols
[WMS-4116] – col: fixed problems with Google Map
[WMS-4121] – sys: fixed incorrect BLF state of user who completed attended transfer of incoming call from trunk
[WMS-4122] – sys: fixed an issue with incorrect BLF states in case SIP reload occurred during an ongoing call (e.g. trunk settings were re-saved or PBX external IP was changed) and then the call was put on hold and resumed
[WMS-4123] – wms: fixed an issue with missing caller name information in mail subject of missed call email notifications, starting from WMS release 3.87

Other (not related to WMS interface version)
[WMS-3937] – conf: fixed an issue in which the picture of participant without video was not shown on main screen
[WMS-4074] – kite: it is now allowed to send files only in JPEG / PDF format
[WMS-4075] – kite: it is now possible to allow chat & screen sharing only after PBX user sends a message
How to: add the option “?waitMessageFromOperator” to the URL, example of the URL: “https://kite.wildix.com/ucit/324?waitMessageFromOperator”, in this case Kite user can send a message, start a call and screen sharing, only after the PBX user sends the first message
The following values are supported by the parameter:

  • call
  • screensharing
  • chat

You can specify several values separated by comma, example: “https://kite.wildix.com/ucit/324?waitMessageFromOperator=chat,screensharing”


WMS Hotfix Date: 16.02.2018

Additional fix for BLF problem

Go to WMS Settings -> Tools and utilities -> Upgrade, click „Upgrade additional packages“; after the upgrade perform „Configure / sync“ of WP4X0 phones


WMS Hotfix version 3.87.39178.52 Date 13.02.2018

Improvement

[WMS-3531] – wms: improvements for WMS Dialplan debug page

[WMS-4080] – col: status message set for a Custom status in Collaboration Settings -> Chat / Presence is now visible for other users of the system
How to use custom statuses? Example:

  • add a new Custom status “away” with message “lunch” and status duration “0 h 45 min” in Collaboration Settings -> Chat / Presence
  • click on your user status and select this status message under “away” (lunch – 45 min.)
  • other users of the system can now see that your user status is “away” for 45 minutes and “lunch” as your status message

Fixes

[WMS-3649] – wms: fixed an issue with Dialplan export not working if connected to WMS via WMP
[WMS-3723] – sys: fixed an issue in which screen sharing in ubiconf could stop working in case of 30 and more viewers
[WMS-3838] – wms: fixed an issue with chat history and sync not working in case MySQL was used as backend for Chat history with port different from 3306, starting from WMS version 3.86.37657.41
[WMS-3912] – wms: fixed an issue in which PBX sent SIP invite to W-AIR SB with empty SDP in some cases
[WMS-3931] – col: fixed an issue in which user status did not change back to „available“ in Collaboration after an appointment in Outlook calendar ended
[WMS-3962] – col: Continuity option is now present in call dialog also in case of outgoing external call
[WMS-3982] – col: fixed an issue in which Collaboration could fail to connect to PBX due to an unsupported symbol in user status message received from Outlook calendar (with Outlook integration)
[WMS-3992] – col: fixed an issue with audio being played via default speakers when USB headset is connected and selected in Collaboration Settings -> Web phone
[WMS-3997] – sys: fixed an issue with backups being created with empty LDAP in some cases
[WMS-4006] – col: fixed an issue in which after adding a new Feature Key Call group, Timetable, Switch or Trunk, its status was not updated in Collaboration Feature keys menu unless user reloaded Collaboration web page
[WMS-4022] – sys: fixed conference server error message which could appear in some cases after refreshing Collaboration
[WMS-4053] – col: fixed an issue with CDRView not displaying trunk name correctly
[WMS-4060] – sys: fixed an issue with BLF keys showing wrong Colleague status in case call to trunk failed with “480 temporarily unavailable” error
[WMS-4066] – wms: fixed an issue with 30 seconds delay during generating a sound file using

Firmware

[WMS-4056] – dev: new firmware for WP410 2015: 50.145.6.142, WP480(G) 2015: 55.145.6.96, WP490(G) 2015: 59.145.6.135, WP480G 2017:63.145.7.246, WP490G 2017: 67.145.7.113

  • Improved processing of BLF keys states
  • Improved DNS resolving in failover mode in a scenario where Devices Failover by DNS is used (where Main PBX is configured as Primary DNS server, Failover PBX as Secondary DNS server)

Other – these tickets don’t depend on WMS version and are available in stable
[WMS-3953] – conf: fixed an issue with Firefox asking camera and microphone permission multiple times
[WMS-4008] – conf: fixed an issue with status not changing on macOS after exiting a conference
[WMS-4009] – conf: fixed an issue in which colleagues did not receive email invitation
[WMS-4038] – conf: added preview of images received via chat when clicking on them
[WMS-4040] – conf: user can now select to see his/her own video full screen
[WMS-4052] – conf: removed US Number 1.614.347.9868


WMS Hotfix version 3.87.38923.52 Date 02.02.2018

[WMS-3525] – sys: fixed an issue with WP 2015 and pre 2015 becoming slow to handle incoming calls in case of many incoming SIP notify messages (additional fix)
[WMS-3899] – wms: fixed an issue with endless loading of storages tab on Virtual PBXs starting from WMS version 3.87.38426.52
[WMS-3994] sys: fixed an issue with BLF keys displaying wrong Colleague status in some cases on WP4XX 2015-2017 starting from WMS release 3.87.38834.52
BLF displayed a monitored Colleague as busy, after he/she completed an attendant transfer and was no longer busy


WMS Hotfix version 3.87.38881.52 Date: 01.02.2018

[WMS-3992] – col: fixed an issue with audio being played via default speakers when USB headset is connected and selected in Collaboration Settings -> Web phone


WMS Hotfix version 3.87.38827.52 Date: 30.01.2018

Improvements

[WMS-3396] – wms: added possibility to enter MS SQL instance for connection to CDR

[WMS-3949] – sys: added the possibility to force a LAN IP as failover
Note: to speed up the switch from Main to Failover PBX on WP in case you are using Failover in the local network, proceed with the following configuration:

  • add a provision parameter to /rw2/etc/provision.conf in the [wildixp2] section: FailoverPbxIp=10.135.0.1, where 10.135.0.1 is your IP address of th4e failover PBX which is reachable by phones, then check-sync the devices
  • in case the device is provisioned to the Main PBX by domain name, it’s necessary to force IP address for “SIP Server 1” by adding the PBX name – IP record in WMS Settings -> System -> Network -> Hosts (if not added yet) and adding a provision parameter „ForceResolveIp=yes“ under the section [wildixp2] in the /rw2/etc/provision.conf

Note: The configuration will not work in case main or failover PBX has dynamic IP.

Fixes
[WMS-3521] – sys: fixed an issue with video calls between 2 devices in WMS network
[WMS-3919] – sys: fixed an issue in which it was impossible to access phonebooks / call history on WP 2015-2017 in case of large phonebooks or CDR Sqlite backend
[WMS-3920] – sys: fixed an issue in which a user who had a Web phone and a W24FXS 2015 registration, could not answer incoming calls from Collaboration

[WMS-3941] – sys: fixed an issue with “Ring only active device” feature not working correctly, if web phone was set as an active device after browser reload
[WMS-3958] – wms: fixed an issue in which Sounds menu was not reachable even if access was allowed by ACL starting from WMS 3.86.37657.41
[WMS-3961] – sys: fixed an issue with wrong user status of BLF keys on WP4XX 2015-2017 starting from WMS release 3.87
[WMS-3963] – col: fixed an issue in which the groups that did not fit into the screen, were in some cases not displayed on the left sidebar of Colleagues menu even using scrolling in some cases
[WMS-3964] – col: fixed wrong visualization of plus sign in fax number in Outgoing faxes menu of Collaboration starting from WMS release 3.87
[WMS-3988] – sys: fixed an issue in which SIP Proxy failed to start on PBXs with configured UCARP failover after upgrade to WMS version 3.87

Firmware
[WMS-3927] – dev: new firmware for WP490G 2017 which increases BLF subscription limit to 150 and fixes an issue with echo and audio distortion at high volume

Other – not related to WMS version and already available in stable
[WMS-3928] – conf: fixed an issue with login for external users via social network buttons
[WMS-3929] – conf: notification in case user starts speaking but microphone is muted is now shown repeatedly (every 10 seconds)
[WMS-3936] – conf: fixed desktop sharing on Firefox
[WMS-3944] – conf: fixed wrong scaling in two display mode


*** WMS Release 3.87 ***

Important: before proceeding with the update to WMS 3.87, please make sure WP600AXX, Android, iOS apps are updated to the latest version!!!
Version 3.87.38592.52 Date: 23.01.2018

New Features

[WMS-2667] – sys: added call group login / management feature

User can dynamically log into call groups from Collaboration Settings -> Contact center (or in WMS -> Users -> Edit preferences -> Settings -> Contact center):

  • Check the groups you would like to answer for (on this page you can only dynamically log into call groups; status in call groups where you are statically added as a member via WMS cannot be changed on this page)
  • Enable “Sign-on” option
  • Click “Save”

Enable “Unavailable on away / dnd” if you would like to be auto-paused in all call groups when changing user status to Away / DND.
Additionally, if this option is and “Auto pause on no answer” is enabled in WMS -> Dialplan -> Call groups -> Edit strategy, your status will be changed to “Away” in case of no answer within the timeout (Call group Timeout or Dialplan “Call group” application Timeout) for the duration period of Wrap up time).

Example:

  • “Auto pause on no answer” is set to “only this queue” in WMS -> Dialplan -> Call group -> “Edit strategy”
  • “Wrap up time” is set to 10 seconds in WMS -> Dialplan -> Call group -> “Edit strategy”
  • “Timeout” is set to 5 seconds in WMS -> Dialplan -> Call group -> “Edit strategy”
  • “Unavailable on away / dnd” is enabled in Collaboration Settings -> Contact center

In this case if you don’t answer a call within 5 seconds timeout (“Timeout” set on Call group) you are put on pause in the current queue for the duration period of 10 seconds (“Wrap up time” set on Call group) and your user status changes to “Away” with expiration period of 10 seconds (because “Unavailable on away / dnd” is enabled and “Wrap up time” is set to 10). If “Unavailable on away / dnd” is disabled in Collaboration Settings -> Contact center, you are still put on pause in queue but your user status does not change to “Away”.
Limitations:

  • No sync between dynamic users added via WebAPI and via Contact Center (which means, users added via WebAPI cannot see that they are present in the group from Collaboration Call Center menu)
  • Queues with strategy “Call all 32” do not support this feature!
  • If “Auto pause on no answer” is enabled in WMS -> Dialplan -> Call group -> “Edit strategy”, it is necessary to specify “Wrap up time” (must be different from 0!)

Updated documentation: https://confluence.wildix.com/x/BAA8AQ

[WMS-2995] – col: chat sync over web Collaboration and delivery confirmation
Make sure iOS, Android and WP600AXX are updated to the latest version!!! This feature improves chat sync between Android app / WP600AXX and web Collaboration:

  • Improvement of unread chat messages sync
  • Improvement of chat sync between devices of the same user
  • Added Recents sync: the most recent chats appear above
  • Added notification in case message was not delivered to Presence server
  • It is now displayed when the other party is typing a message

[WMS-3253] – sys: caller name and company is now displayed on incoming call from trunk

Caller ID is now displayed with “Company” field for calls from trunks on Wildix devices:

  • For calls from other PBX users (via Mobility service): “Department” field (if present) is displayed
  • For calls from phonebook contacts: “Organization” field is displayed
  • For calls from trunks with Worldwide Phonebook feature: “company” field is not displayed

Feature can be disabled via Dialplan Global Variable: DISPLAYINFOUSELOOKUP=no

It is possible to display additional info using “Set” Dialplan application, example of Dialplan configuration:

  • Add Dialplan application “Set”, enter the value EXTRADISPLAYINFO into the first input field and EXTRA (use your own value) im the second input field -> allows adding additional information to the caller ID name
  • Add Dialplan application “Set”, enter the value DISPLAYINFOPATTERN into the first input field and {name:0:5} [{company}] / {extra} into the second input field -> allows customizing the information displayed as caller ID, e.g. in this example only 5 first digits of the caller ID name will be displayed
  • Add Dialplan application “Lookup caller name in phonebook” -> it’s necessary to add this Dialplan application after “Set” -> EXTRADISPLAYINFO or Set -> DISPLAYINFOPATTERN
  • Add Dialplan application “Dial the phone”

[WMS-3330] – sys: call forward notification is now displayed on WP 2015-2017 also for external calls with indication in case of “Call Forward All” with indication of call forwarding destination
In case both Internal and External call forwards are active, destination set up for Internal call class is displayed on the screen.

[WMS-3395] – api: documented fax send web PBX API
Developer documentation:

[WMS-3401] – col: it is now possible to click on a colleague’s geolocation in chat menu, to open geographical map where the geolocation of that user is indicated

[WMS-3402] – col: added a notification before closing the collaboration tab asking the user for confirmation

[WMS-3436] – сol: added scrolling to calls history

[WMS-3437] – сol: added buttons on mouse over when selecting a colleague in colleagues / chat (recents)

  • Colleagues menu: added call / chat buttons on mouse over
  • Recents tab in chat menu: added call button on mouse over

[WMS-3481] – sys: user status with expiration time and status message (if set) is now reported using TTS (text-to-speech)
Notes:

  • Feature is available only for Cloud systems (per year / per month subscription) with Premium license
  • Feature is available only for „en“ or „en-us“ languages

[WMS-3503] – col: call quality is now indicated in call dialog for calls via WebRTC

[WMS-3515] – wms: added transcripts of voicemail for premium accounts
Notes:

  • Feature is available only for PBXs with monthly / yearly subscription with Premium license
  • Feature is enabled by default (disable it in WMS Dialplan -> General Settings, “Convert Voicemails to text and send by email”)
  • Language of calling party who recorded the message is used for transcription

[WMS-3516] – wms: improved template for email notifications in case of missed calls, new voicemails, missed chats etc

[WMS-3566] – api: added API to delete / get / update/ add a user

Documentation is placed to folder „/var/www/api/doc“ and is available at the URL „https://<pbx-host>/api/v1/doc/“

[WMS-3604] – col: added call continuity option to call dialog
In case user has more than one device registered to his/her account, Continuity option is available in call dialog during a call: click “Other” button in call dialog and then select the device you want to continue the call on (the call will be automatically picked up on the selected device).

[WMS-3667] – col: added quick “send to voicemail” button to Call dialog -> Transfer

  • Send a call to your own Voicemail: upon receiving an incoming call (or during an active call) press Transfer button from the call dialog window and then press the Voicemail icon
  • Send a call to a colleague’s Voicemail: upon receiving an incoming call (or during an active call) press Transfer button from the call dialog window, enter a colleague’s name or extension number into the search field, and then press the Voicemail icon near the name of the colleague

Note: in case call is sent to VM before answer, greeting is played; in case call is sent to VM after answer, only beep is played.

[WMS-3685] – sys: added possibility to use TTS in Dialplan

It is now possible to dynamically create audio files using TTS (text-to-speech) service using Dialplan applications:

  • Play sound
  • Play sound and wait for digits

Feature is available for:

  • Cloud systems; Languages „en“, „en-us“, „it“, „de“, „fr“, „nl“
  • License – premium, per year, per month.

To restrict synthesise waiting time (in case TTS service is unavailable), use the global Dialplan variable „TEXTTOSPEECH_TIMEOUT“ in „Dialplan → General settings“. Default value is 3 seconds.
It’s possible to use “Jump to if” Dialplan application with channel variable „TTSSTATUS“ and values: „UNDEFINED“/“SUCCESS“/“FAILURE“ after execution the play sound app.
Example of Dialplan configuration:

  • Add Dialplan application “Set” -> Language -> “en”
  • Add Dialplan application “Play sound” and enter into the field: Welcome to Wildix PBX ${CALLERID(name)}
    Optionally you can add Dialplan application “Jump to if” -> condition: „${TTSSTATUS}“!=“SUCCESS“ -> Procedure, Number: <extension>

Result: the caller whose name is John Doe will hear “Welcome to Wildix PBX, John Doe”; language was set to English because the phrase “Welcome to Wildix PBX” is in English.

[WMS-3719] – wms: added auto upgrade and reboot of all the devices after PBX upgrade
“Configure / sync” of all the connected Wildix devices will be done automatically 20-30 minutes after the PBX has been upgraded
[WMS-3774] – col: W-AIR Headset user assignment -> UPDATE 24.01: FW TEMPORARILY REMOVED FROM REPOSITORY
Documentation: https://confluence.wildix.com/x/iQA8AQ

Improvements
[WMS-3260] – sys: support setting of ToS / DSCP by PBX for calls to WebRTC phone
[WMS-3385] – wms: UX improvements of Storage page

  • File system upgraded to ext4
  • Usability improvements allowing user to easily add NFS/Windows shares

[WMS-3389] – col: added HTML5 notifications for new Voicemails
[WMS-3433] – col: chat conference refactoring and improvements
[WMS-3434] – сol: settings sub-menu has been moved to the left sidebar
[WMS-3435] – col: people from the same department are now automatically added to user’s roster and displayed in Colleagues menu upon the first time access

[WMS-3447] – sys: improvements for dial by name audio files in EN package
[WMS-3461] – sys: added back audio files for alphabet letters to en/it/fr sound packages
[WMS-3473] – wms: added values selection to Dialplan “Set” application -> “ITC”: 3.1 kHz / unrestricted / speech
Note: previously it was possible to enter these parameters manually

[WMS-3484] – col: limited the use of special characters when importing or manually adding users
Note: Control characters are no longer accepted; only the following symbols can be used as separators in CSV export: “;”, “,”, “|” (others are substituted with space)

[WMS-3488] – sys: search in phonebook is now performed on selected phonebook on WP2015-2017

Enter Phonebook menu -> press “Filter” and select a phonebook -> press “Search”: the search is now performed only on the selected phonebook.

Related ticket: WMS-3808

[WMS-3491] – sys: pressing a digit on dialpad during search in phonebook on WP4X0(G) 2015-2017 now jumps to the search results starting from the letter corresponding to the pressed digit
During a search in phonebook press a digit on Dialpad. E.g. press 2 (digit 2 corresponds to letters A/B/C): search results for phonebook contacts whose names start with A are displayed.

Related issue: WMS-3808
[WMS-3495] – sys: it is now possible to call numbers starting with ** from W24FXS 2015
Note: it’s necessary to re-provision W24FXS 2015 after the upgrade

[WMS-3500] – col: the first available device is now displayed to user instead of “Any” option upon the first login
Note: additionally when preferred device becomes unavailable, “Web phone” is automatically selected

[WMS-3501] – col: added support for drag & drop of calls for call transfer using Windows PC touch screens on Windows 10
[WMS-3502] – col: added Company to live search results and increased results readability
[WMS-3505] – sys: added support of call on hold status indication on Kuando Busylight
Call on hold status indication: user status color + fast blinking yellow + delay + ringtone playback

[WMS-3517] – wms: the exact time at which auto-upgrade will take place is now indicated in WMS Settings -> Tools and Utilities -> Upgrade
[WMS-3544] – sys: SIP Proxy is no longer restarted in case of continuous network interface goes up and down continuously
[WMS-3564] – col: added answer / refuse button in Chrome push notifications
Notes:
Press “More” to be able to Answer / Reject a call
To apply this change, it’s necessary to restart the browser after the update

[WMS-3586] – col: added usernames for chat conversation copied into buffer
[WMS-3613] – wms: increased size of Edit Dialplan dialog window
[WMS-3617] – col: added notification in case a user attempts to remove a colleague from roster who is configured as BLF key “Colleague”
[WMS-3620] – сol: added indication whether default DSCP QoS parameter in Settings -> Web Phone is ON or OFF (which depends on the value selected on SIP-RTP page)
[WMS-3621] – col: added live search of contacts by Organization (Company) field
[WMS-3668] – col: auto adjust mic is now disabled by default in Settings -> Web Phone to avoid problems related to increased microphone sensibility
[WMS-3669] – col: removed sound for connection / disconnection from PBX
[WMS-3670] – wms: DHCP server page improvements
[WMS-3683] – sys: improved Nagios monitoring
Documentation: https://confluence.wildix.com/x/C4AlAQ

[WMS-3693] – dev: re-enabled support for G729 codec on W-AIR SB
[WMS-3701] – dev: added back support for assigning two or more W-AIR handsets to the same user
Note: this feature was disabled in WMS-452
[WMS-3706] – wms: improved email notification template about no free space in storages

[WMS-3732] – wms: phone number is no longer normalized during phonebook import if it starts with a letter or if country code is not set

[WMS-3733] – wms: added “Support https only” option to SIP-RTP page
Feature is enabled by default on new PBXs: HTTP connections are redirected to 443 or to the alternative https port if configured

[WMS-3737] – col: implemented cloud-based geolocation service

[WMS-3739] – col: speeded up pictures preview which was slow after the picture was opened more than once

[WMS-3740] – wms: improvements for Dialplan applications „Play sound“ and „Jump to if“

  • Increased the width of the input field for the applications applications „Play sound/Play sound and wait for digits“
  • Added condition template „${TTSSTATUS}“!=“SUCCESS“ to the application „Jump to if“

Related ticket [WMS-3685]
[WMS-3742] – wms: added click-to-callback link to missed call email notification

[WMS-3743] – col: usability improvements for live search field

  • Added placeholder text „Search or dial a number“
  • Moved “SMS”, “fax” and ‚post-it‘ buttons to additional menu (under “+” icon)
  • Other minor graphical improvements

[WMS-3744] – col: usability improvements for Colleagues menu
Groups moved to left sidebar menu, allowing selection by All groups or by separate group

[WMS-3754] – dev: added support for call feature settings for whitelist blacklist classes from WP
Press Features menu -> Call type: internal -> select whitelist / blacklist and set Call features for the selected call class

[WMS-3756] – sys: added support for custom dial parameters in Dialplan
Additional dial options (e.g. “g” – proceed with Dialplan execution at the next priority in the current extension if the destination channel hangs up) are now supported via Dialplan application “Set”, example:

  • Add “Set” Dialplan application and insert manually the string DIAL_OPTIONS into the first input field and g (or another option) into the second input field
  • Add the Dialplan application to which it should be applied, e.g. “Dial the phone”, “Dial the trunk”, “Trunk group”

Otherwise you can add a new Global Dialplan variable: set(DIAL_OPTIONS=g)

[WMS-3757] – dev: added notification on WP display when user tries to modify his / her user features from Features menu of WP, but it is restricted by ACL

[WMS-3760] – col: DTMF dialog graphical improvements

[WMS-3791] – wms: simplified requirements for the department field in “Edit” user menu
More special characters are now accepted in the Department field

[WMS-3799] – col: it is now easier for the user to select chat conversations that he/she would like copy into buffer
Related ticket: WMS-3586

[WMS-3800] – sys: caller name lookup feature Worldwide Phonebook is now enabled by default

  • Feature is available for Cloud PBXs with premium license
  • Caller ID name lookup in external resource is performed automatically for calls from / to Trunks
  • Feature can be disabled via global dialplan variable EXTCONTACTLOOKUP=no

[WMS-3801] – сol: web push option is now enabled by default for new users
Note: feature can be disabled in Collaboration Settings -> Personal, “Web push”

[WMS-3812] – sys: improved readability of dialplan log messages from wms.log

Fixes

[WMS-3143] – dev: fixed an issue with time settings (timezone, NTP server, DST selected in “Edit Device” menu) not being applied to W-AIR base SB
Related ticket: WMS-3636 -> UPDATE 24.01: FW TEMPORARILY REMOVED FROM REPOSITORY

[WMS-3438] – col: accented characters in caller name are now correctly forwarded to pop up URL command

[WMS-3441] – sys: improved single sign-on via AD
Now you can import users as:

  • userPrincipalName as LOGIN and log in on PBX via: username@domain
  • sAMAccountName as LOGIN and log in on PBX via: domain\username

Note: LOGIN must be the same as stored in local LDAP

[WMS-3442] – col: fixed an issue with CDR-View exporting call duration values as text in case of Excel export of Data greed
Note: this allows working with call duration values in XLS and applying formulas

[WMS-3478] – sys: fixed an issue in which calls through remote PBX / send SMS via remote PBX may stop working after PBX changed its serial

[WMS-3525] – sys: fixed an issue with WP 2015 and pre 2015 becoming slow to handle incoming calls in case of many incoming SIP notify messages
The issue reproduced for call group agents using strategy „Ring all“ after upgrade to WMS 3.85
[WMS-3530] – sys: fixed an issue in which call history couldn’t load on WP2015-2017 if phone number in CDR contained diacritic letters

[WMS-3548] – wms: removed deprecated ios6 support

[WMS-3561] – col: fixed a crash on Safari v. starting from 11.0.X occurring when attendant console was being used with VoiceOver on MacOS

[WMS-3622] – dev: fixed an issue causing continuous reboot of W-AIR bases in W-AIR network if bases had different time settings (DST enabled / disabled in “Edit Device” menu)
Related ticket: WMS-3636 -> UPDATE 24.01: FW TEMPORARILY REMOVED FROM REPOSITORY

[WMS-3633] – col: fixed an issue in which Voicemail was not displayed at all in Collaboration if corrupted

[WMS-3655] – col: fixed an issue with loss of chat messages in case connection to MySQL was temporarily lost

[WMS-3665] – col: fixed an issue in which Web phone did try to reconnect after receiving HTTP error 503: service unavailable

[WMS-3675] – col: fixed issues with Collaboration in Firefox v. 57

  • Fixed: Post-It as personal reminder appeared again after closing notification and reloading the browser page
  • Fixed: Emojis were not displayed in Kite widget

[WMS-3697] – sys: fixed an issue with notification displayed in some cases after reboot of Cloud PBXs about partitions not being mounted

[WMS-3703] – sys: Voicemail application is now automatically finishing its execution in case of long silence (>10 seconds)

[WMS-3705] – wms: fixed an issue in which users import from MySQL could freeze in some cases without displaying any error to user
[WMS-3714] – col: fixed an issue with empty colleagues in Collaboration in some cases

[WMS-3745] – dev: fixed an issue with first pressed digit being ignored when in standby mode on WP4XX 2017
Related issue: WMS-3808

[WMS-3747] – wms: fixed an issue with contacts from private Phonebooks being available for all users in case there were no public Phonebooks on PBX

[WMS-3773] – col: fixed no audio issue in Windows Web phone with direct RTP enabled for incoming call after 2.7.0 Wildix Integration service release

[WMS-3788] – col: fixed an issue in which call to web phone did not work if direct RTP was enabled in Collaboration
[WMS-3829] – col: fixed an issue in which clicking on HTML5 notification about a new chat message, could open an old chat message with a different user
[WMS-3865] – col: fixed an issue with user status not being changed to initial value after user exists from the conference and user status displaying corrupted symbols
Issue reproduced in case unicode symbols were used in user status message
[WMS-3868] – wms: fixed an issue with wrong format of CONTACT header in SIP message in case the INVITE message from the operator was missing some parts

[WMS-3869] – wms: fixed one way audio issue on WP600AXX on incoming group call with strategy call all: 32
[WMS-3885] – sys: fixed an issue with absent disk space on volume /dev/shm in case of large phonebooks (over 200K)
[WMS-3920] – sys: fixed an issue in which a user who had a Web phone and a W24FXS 2015 registration, could not answer incoming calls from Collaboration

Firmware

[WMS-3636] – dev: new Firmware for W-AIR system version 04.00.00.02 -> UPDATE 24.01: FW TEMPORARILY REMOVED FROM REPOSITORY

  • Fixes a problem with no SIP registration after disconnecting and connecting again the Ethernet cable on SB Base
  • Fixes problems described in WMS-3143 and WMS-3622

[WMS-3808] – dev: new firmware for WP410 2015: 50.145.6.140, WP480(G) 2015: 55.145.6.94, WP490G 2015: 59.145.6.133, WP480G 2017: 63.145.7.237, WP490G 2017: 67.145.7.109

  • Added the option to control the time of the missed event-LED blinking (option can be configured in provision.conf)
  • Improved jumping between different parts of phonebook search results: scroll down to load the next part of search results, and then scroll up again to go back to the previous part: the marker is now set to the correct position (to the last page of the first part of search results)
  • Added the option to select the active microphone during the „hands-free+handset picked up“ mode (Menu -> Audio -> Handsfree sound input)
  • WP4X0G 2017: the upper blue bar was removed inside the phonebook, call history, features, voicemail inbox to increase readability of phone menus
  • WP490G 2017, WP490(G) 2015, WP480G 2017: the volume control bar during a call was moved down to avoid the over-laying with other information present on the screen
  • WP490G 2017: increased BLF subscription limit to 150 and fixed an issue with echo and audio distortion at high volume

[WMS-3857] – dev: new firmwares for BRI/PRI media gateways, version 2.0.41.672
What’s new:

  • Jitter buffer increased to 900 ms
  • Added provisioning parameters to control the jitter buffer values for PRI 2017 from WMS -> PBX -> SIP-RTP ->Jitter Buffer

Other – these tickets are not related to WMS version and are already available in stable
[WMS-3467] – conf: improvements for connection quality indicator
Notes:
In case of no internet connection, an error message is displayed
Added a row with connection status description

[WMS-3588] – col: improved visibility of Wildix application “W” icon in Chrome OS
[WMS-3607] – sys: added US toll free DID number
[WMS-3632] – conf: fixed an issue with screen sharing not being recorded in case of conference recording
[WMS-3639] – conf: video conference recording files are now saved in format compatible with MacOS and Windows PC
[WMS-3643] – conf: added possibility to mute / unmute participants connected via phone (audio only mode)

[WMS-3663] – kite: added redirects for kite.wildix.com and conference.wildix.com URLs

[WMS-3664] – kite: added privacy cookie disclaimer when opened in a separate window

[WMS-3672] – conf: fixed a problem with low quality video from remote user who connected without video and then enabled webcam

[WMS-3673] – conf: fixed an issue in which miniatures of other users were blank and it was impossible to start recording / streaming, in case all users except speaker were in mute mode
[WMS-3677] – conf: added Spain / Portugal / Poland / Canada / Russia DID numbers
[WMS-3696] – conf: fixed an issue in which focus on screen sharing displayed empty screen in some cases

[WMS-3727] – conf: recorderding/streaming improvements

  • Improved reactivity of conference recording buttons
  • Added progress on icon while enabling / stopping recording
  • Removed “Starting” notification
  • Removed “Start record” dialog
  • Loader is now displayed instead of Record button when starting

[WMS-3753] – conf: fixed an issue in which error “room not available” could appear after short period of network downtime
[WMS-3854] – conf: added notification in case user starts speaking but microphone is muted
[WMS-3871] – kite: improved screen sharing

  • all available space in the window is now used for screen sharing
  • improved notifications in case connection was lost

Callweaver version 0.86.38614-5 Date: 19.01.2018
[WMS-3920] – sys: fixed an issue in which a user who had a Web phone and a W24FXS 2015 registration, could not answer incoming calls from Collaboration


Callweaver version 0.86.38435-5 Date: 17.01.2018
[WMS-3856] – sys: fixed an issue with no audio after attended transfer of a call from trunk using W-AIR handset (ref. 2017122210000011)


Version 3.86.38262.41 Date: 28.12.2017

Improvements

[WMS-3366] – col: added support for apu75 in headset integration
[WMS-3735] – col: Outlook integration improvements

  • Fixed a crash at startup after Outlook integration installation (ref. 2017102310000209)
  • Fixed an issue with status presences not being displayed in some cases in Outlook (ref. 2017112410000509)

Fixes
[WMS-3399] – col: fixed an issue in which the headset connected to dock station started to ring after user put the active call on hold, made the second outgoing call and then cancelled it

[WMS-3690] – sys: fixed an issue with peer2peer connection between Client PBXs in WMS network after WMS v. 3.82
[WMS-3824] – sys: fixed an issue with chat messages not being stored into MSSQL backend in case user name contained backslash symbol
[WMS-3826] – col: fixed an issue with missed call notification not disappearing in some cases after opening call history in Collaboration


Hotfix Version 3.86.38102.41 Date: 21.12.2017

Improvements
[WMS-3676] – sys: speeded up mobile apps call push notifications delivery
[WMS-3766] – sys: increased reliability of mobile apps call push notifications

Fixes
[WMS-3476] – sys: fixed an issue with WMS freezing after saving CDR MySQL configuration
[WMS-3779] – sys: fixed an issue in which upgrade procedure could fail in some cases
[WMS-3787] – sys: fixed an issue in which user who put a call from trunk on hold using Web Phone to perform a call transfer, could still hear the voice of the external user (while the external user was hearing music on hold), starting from WMS stable 3.86.37977.41
[WMS-3818] – sys: fixed an issue in which IVR menu and user ringtones in Sounds menu of Per User PBX displayed blank page if accessed via WMP starting from WMS v. 3.86.37657.41

Other – not related to WMS version and already available
[WMS-3612] – kite: fixed an issue with audio playback in Safari browser on iOS
[WMS-3728] – conf: fixed an issue in which a preview of a participant who went offline, was white without user picture
[WMS-3734] – kite: minor graphical and usability improvements


** RELEASE 3.86 **

Version: 3.86.37657.41 Date: 28.11.2017

Important notes:

  • Starting from this version, use only PBX domain name in Kite links (do not use PBX serial); e.g.:

– kite.wildix.com/[pbx domain]/[extension] – correct;
– kite.wildix.com/[pbx serial]/[extension] – not correct.

  • Starting from this version, Overlay system is no longer supported
  • Starting from this version only 5 digits of PIN are now required for phone login service
  • Increased chat history size to 100Mb for Sqlite backend; after reaching 100Mb, the oldest messages are deleted, more info: WMS-2915
  • Audio quality indication is now displayed on WP 2015-17 helping user to understand when there are network problems, more info: WMS-3211
  • Decreased priority for Paging / intercom for WP 2015-2017 and web phone: in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call; more info: WMS-2965, WMS-3207 and WMS-3211
  • Global Dialplan Variable PIN_LENGTH is no longer supported!

Features

[WMS-2340] – sys: added PBX key support in WMS and WMP for Per-User PBXs, and auto-reload of system services after changing the number of users
To activate a per user PBX: enter PBX Key in WMS Settings -> Activation / Licensing (PBX key can be found on WMP -> PBX per user -> select the company -> select the PBX -> scroll down to “Advanced features” -> PBX key, click “View”)
To add more users for a per user PBX: go to WMP -> PBX per user -> select the company -> select the PBX -> add more users, click “Save”; in WMS -> Activation / Licensing click “Refresh via Internet”

[WMS-2534] – sys: WMS network Failover service
Documentation: https://manuals.wildix.com/failover-beta/
Video tutorial: https://manuals.wildix.com/video-tutorials/#failover

[WMS-2556] – sys: added encryption of user passwords and password reset
This feature significantly improves password security and introduces the following changes:

  • newly created passwords are no longer readable via WMS and backups:
    • they are no longer visible in CSV export done from WMS -> Users
    • they cannot be consulted in Collaboration Settings – > Personal
  • password reminder works by generating a new password
  • for newly created / updated passwords: „Send welcome message“ option from WMS resets user password
  • TAPI clients must be reconfigured to use SIP Password
  • SIP passwords can no longer be created by PBX admin, they must be generated automatically
  • phone PINs to perform login via 99 are set to 5 digits
  • user password required to access another user’s mailbox via 81 Feature Code is now set to 5 digits
  • it’s no longer possible to assign WP600AXX to a user with super admin password
  • Overlay Enterprise WiFi system is not supported

[WMS-2563] – sys: Oracle FIAS key system certification
Documentation: https://manuals.wildix.com/hotel-integration-with-xopen-beta/

[WMS-2685] – col: added Chrome Push notifications
Enable it in Collaboration Settings -> Personal, “Web push”
Notes:

  • Web push can be enabled only for Chrome browser
  • Web push doesn’t work if Chrome is not running (you receive notifications when you turn on Chrome again)
  • Web push is turned off after logout
  • Feature works only for PBXs which can be accessed via domain with valid certificate
  • Chat notifications arrive with 2-3 minutes of delay
  • Web push notifications arrive without audio (browser limitation)

[WMS-2695] – sys: dial by name feature for en/it/fr/de/nl sound packages

[WMS-2756] – wms: new sounds manager interface
what’s new:

  • graphical improvements
  • added possibility to move files from/to another folder
  • added possibility to drag&drop files – mp3,wav,alaw, 10 MB max
  • added TTS (text-to-speech) (see WMS-3158)

[WMS-2801] – col: added possibility to set custom user status
Description: this feature allows you to add DND / away user statuses with predefined duration period. In this way you can add several DND and away statuses with custom duration time (e.g. 30 minutes, 20 minutes, 1 hours, 16 hours, 24 hours); once added, they appear in the selection of available user statuses, so that you no longer have to select an expiration period manually when you want to change your status to DND / away.
How to add custom statuses: Collaboration -> Settings -> Chat / Presence tab OR WMS -> Users -> user preferences -> Settings -> Predefined statuses
How to set custom statuses: once added in Settings, they can be quickly accessed and set by clicking on your user status in Collaboration top menu
How to restrict: via ACL “can / cannot set” – “advanced status”

[WMS-2803] – sys: auto upgrade feature for PBXs
Thanks to this feature you can select the repository and enable the system to check each day / week / month if there is a new version available, and if yes, perform the upgrade automatically
Notes:

  • An email is sent to the defined email address with the upgrade result (only in case the upgrade was performed)
  • Auto-upgrade is performed during the night

[WMS-2804] – col: added proxying of camera image previews with Wildix Integration Service
This feature allows for reducing the load on the PBX in case of a video call from the intercom
Feature works in all the cases where the intercom camera can be accessed via the browser and the browser has connection to the Wildix Integration Service, here are some examples:

  • video doorphone, Collaboration user and the PBX are located in the same office (local network)
  • video doorphone and Collaboration user are located in the same office and the PBX is in cloud (LAN behind NAT)
  • video doorphone and the PBX are located in the same office (LAN behind NAT), Collaboration user is in a different LAN behind NAT (user has VPN to the office LAN)
  • PBX and Collaboration user are located in the same office (LAN behind NAT), video doorphone is in a different network (doorphone must have an external IP)
  • PBX in cloud, intercom in LAN1 (office), Collaboration in LAN2 (home) (user has VPN to the office LAN or a specific port is forwarded on the office router, or the doorphone must have an external IP)

[WMS-2828] – col: possibility to set presence status of other users
ACL: the use of this feature is by default restricted, to enable it, add ACL permission “can modify presence”
How-to: Colleagues tab -> right-click on a user -> Set presence

[WMS-2829] – col: added the possibility to add unlock button to call dialog for calls from intercom
Unlock button can be added with Dialplan Custom Application SIPAddHeader(Unlock-Button:), example: SIPAddHeader(Unlock-Button:*1234#), where “*1234#” is DTMF (same as for WP600AXX)

[WMS-2830] – sys: FIAS certification with Evols (Nuconga and Web Hotel)
More information (only Italian at the moment): https://www.wildix.com/it/portfolios/nuconga-pms-per-hotel/

[WMS-2845] – wms: ACL “can / cannot” – “call speed dial” was replaced with “can / cannot call” – “numbers in allowed phonebooks”
This ACL was added to allow certain groups of users to call only numbers in certain phonebooks (the ones which are selected in WMS -> Users -> user preferences -> Settings -> Phonebooks)

[WMS-2858] – col: added possibility to hide last X digits in CDR-View
Feature can be enabled in WMS Settings > Call and chat history -> CDR Settings;
ACL: “can/cannot see full number in CDR-View”

[WMS-2861] – col: removed currency indication in CDR-View

[WMS-2875] – sys: added Wildix SNMP MIB for trunk status (ticket 2017052410000379)
MIB file with description of supported OIDs can be downloaded from Google Drive: LINK
Note: It’s possible to monitor trunk ID, label, type, direction, state

[WMS-2896] – dev: added the possibility to archive calls from WP 2015-2017 history menu
How-to: select “Detail” in History menu
Note: Archived calls can be restored from Collaboration

[WMS-2939] – wms: added “auto pause on no answer” option for call groups
Notes:

  • enable auto pause in Dialplan -> Call groups -> Edit strategy -> “Auto pause on no answer”; you can additionally set up the delay for auto pause in seconds in the field “Auto pause delay”
  • users are automatically paused in all call groups if they have no device registered, if call to queue was not answered within the timeout or if user has DND with call reject
  • after being paused, users must unpause manually
  • the option is not available for “call all” strategy
  • for the “fewest idle” and “fewest calls” strategy, user is paused in case a call was not answered within call timeout specified in user preferences
  • paused group members can be viewed via WebAPI and phone’s BLFs

[WMS-2961] – dev: documented procedure of how to delete a handset’s IPEI from W-AIR SB to be able to reuse the slot
Documentation: Admin level documentation -> under “W-AIR” section

[WMS-3012] – wms: added the possibility to auto delete old CDR after X months
Added a new parameter to WMS Settings -> Call and chat history -> CDR Settings -> “Delete after X months”

[WMS-3022] – sys: support of login via Office 365 and Google single sign-on via the field “login” (otrs 2017052510000233)

[WMS-3056] – wms: support of PBX per user upgrade from WMP
API documentation: https://manuals.wildix.com/pbx-control-apis/ – under “Portal” section

[WMS-3086] – sys: added support for DSCP on WP600AXX (tk. 2017070510000437) starting from WP600AXX version 2.8.22
Notes:

  • if enabled, value from SIP-RTP page is applied for WP600AXX
  • feature can be disabled in Phone App -> Advanced Settings -> Developer

[WMS-3115] – col: support DSCP prioritization in WebRTC phone for Chrome
How to ensure QoS: Admin level documentation -> under “Collaboration” section

[WMS-3132] – col: added visual / audio notifications for incoming call to monitored callgroup in Collaboration (Ticket#: 2017062610000257)

[WMS-3133] – col: call intrusion feature for colleagues calls on right click
Added Listen / Barge / Whisper actions on right click in Collaboration
Listen = silent intrusion
Barge = conference intrusion
Whisper = partial intrusion
ACL: Feature can be restricted via ACL “can / cannot” – “intrusion”

[WMS-3158] – wms: TTS file generation support in sounds manager
Notes:

  • added Text to Speech (TTS) window inside sounds menu allowing you to record the file with different voices in different languages
  • added the possibility to set volume / speech / pitch (in “Advanced” settings)
  • feature is available for all Per User PBXs with monthly / yearly subscription with at least one Premium license

[WMS-3187] – wms: support for xOpen in Hotel integration
Documentation: https://manuals.wildix.com/hotel-integration-with-xopen-beta/

[WMS-3195] – sys: added force_lookup_number function which allows displaying a specified number instead of a real caller / called ID in call dialog and CDR
Scenario: user dials a number from Collaboration; a different number (specified by system administrator) is called instead of the number known to user
How to implement: add Dialplan application Set -> FORCE_LOOKUP_NUMBER)=XXXXX, (where XXXXX is the number which must be displayed to user) followed by Dial trunk / Trunk group Dialplan application

[WMS-3198] – sys: added Shell dialplan function
Example of query to sqlite using shell: Dialplan application Set – USERID – ${SHELL(/usr/bin/sqlite3 /mnt/cticonnect/cticonnectdb “select username from cti_contacts where phonebook_id = 6 and mobile = ‘${EXTEN:1}’”)}

[WMS-3208] – wms: added “keep-alive” option in SIP trunk settings menu
Feature is by default enabled for newly created trunks or after re-saving existing trunks

[WMS-3245] – sys: added support for dialing letters in Collaboration and for importing of letters inside phone numbers in phonebooks

[WMS-3251] – sys: added support for emergency calls from unassigned phones
To allow calls to any destinations from phones which are assigned to “unknown” account: add a new Dialplan procedure called login-emergency and specify called numbers which can be dialed and Dialplan applications which must be executed for each number

[WMS-3254] – sys: added the possibility to set a custom ringtone for calls in dialplan
How-to: Dialplan Application “Set” -> “Ringtone” -> select a ringtone from the list

[WMS-3256] – col: added the possibility to open Collaboration using f11 hot key if no number is selected
Notes:

  • hot key can be changed in Collaboration Settings -> Personal, “Dialing hot key”
  • in case Collaboration as a native app is installed, the app will be opened by pressing hot key

[WMS-3308] – wms: added trunk ID number visualization on trunks page

[WMS-3310] – sys: ACL “can / cannot” – “delete calls” ability has been added to the list of default ACL settings

[WMS-3423] – kite: audio calls support in Safari 11

Improvements
[WMS-2665] – sys: always use rfc2833 payload received in incoming invite
[WMS-2824] – sys: ACL “can view calls” is implemented for WP4X0 2015-2017
[WMS-2833] – col: added support for drag&drop transfer on call group
[WMS-2906] – sys: added notification to log file if FTP backup cannot be completed
[WMS-2915] – col: increased chat history size
Notes:

  • chat database size has been increased to 100Mb only for Sqlite (if some other backend is used, then chat history is kept for 30 days, as previously)
  • if chat history size has exceeded 100Mb but chat history period is less than 30 days, the last 7 days of chat history is kept in any case
  • after reaching the size of 100Mb, the oldest messages are deleted

[WMS-2927] – col: support numbers in e.164 format from 7 to 18 digits for live search
[WMS-2933] – col: automatically refresh Collaboration after PBX upgrade

[WMS-2959] – col: added tooltip on contact name during a call (click to add / show contact)
[WMS-2965] – dev: give priority to calls over paging on WP4X0 2015-2017
More info in WMS-3207
[WMS-3027] – sys: improved SIP Proxy service watchdog
[WMS-3035] – wms: optimization for processing WebAPI requests
[WMS-3032] – wms: ongoing calls are now displayed in Dialplan Debug menu
[WMS-3041] – sys: improved registration of remote W01-2FXS gateways over some firewalls which block encrypted SIP traffic over port 5060 UDP
[WMS-3047] – sys: provisioning URL is now always pushed with custom secure port 443 to W04FXS and W04FXO
[WMS-3073] – dev: added support for country tones in W24FXS 2015 (same as for W04FXS and W02FXS)
[WMS-3083] – sys: only 5 digits of PIN are now required for phone login service
[WMS-3087] – wms: support of multiple email addresses or special characters in the dialplan application “Go to voicemail”
[WMS-3095] – wms: added support for import of all fields supported by phonebook and the possibility to use concatenation of fields (Exchange Server, Google, Office 365)
[WMS-3098] – wms: added HW info (Processor, Memory) to Activation / Licenses page
[WMS-3099] – sys: support for direct RTP for intercoms and improvements (by default added for 2N Helios, Alphatech and Mobotix)
[WMS-3097] – wms: added possibility to use concatenation of fields during users import
[WMS-3109] – col: graphical improvement: increased visibility of the separator between chat and history
[WMS-3124] – col: updated welcome email design
[WMS-3127] – wms: whitespaces are now removed from strings before importing users from external backend
[WMS-3141] – col: added preview and download button for images in file transfer
[WMS-3168] – sys: disabled remote support for WMS 2
[WMS-3191] – wms: refactoring and redesign of Dialplan debug page
[WMS-3200] – col: removed users CSV import button for Client PBXs
[WMS-3201] – col: sub-menu of live search can now be navigated using keyboard arrow keys
[WMS-3202] – col: graphical improvement for chat menu fixes a rare issue in which user had to scroll to see the latest messages
[WMS-3204] – wms: improved information sent in email notification for “scheduled backup to email”
[WMS-3207] – col: web phone calls are no longer interrupted by intercom and paging
To enable web phone to answer Paging / Intercom call immediately, even when user is busy on the phone: add Dialplan Custom application SIPAddHeader(Call-Info: sip:wildixgw;answer-after=0;force)
To enable web phone to answer Paging / Intercom call after 5 seconds timeout, even when user is busy on the phone: add Dialplan Custom application SIPAddHeader(Call-Info: sip:wildixgw;answer-after=5;force)

[WMS-3230] – col: reduced CPU usage while disconnected
[WMS-3243] – wms: decreased load on PBX generated by web phone
[WMS-3252] – sys: call recording is now saved as a single file
[WMS-3255] – sys: improved call classes support for Switzerland (Tk. 2017082110000306)
Added new premium prefixes to the table of CH call classes, documentation: https://manuals.wildix.com/acl-and-call-classes
[WMS-3266] – col: it is now possible to dial letters in live search; “/” is now automatically removed before dialing as normally it separates prefix from the main number
[WMS-3282] – col: improved jitter buffer for calls to conference service
[WMS-3284] – col: “on the phone” and “ringing” statuses are now shown in Outlook (with Outlook integration)
[WMS-3318] – col: added an option to open contact from call dialog drop down menu
Note: previously it was only possible by clicking on user name in call dialog
[WMS-3332] – col: improved reliability of connection to integration services on Mac OS, and, partially on Windows
[WMS-3334] – sys: improved the sequence of HTTP headers via Tproxy
[WMS-3343] – sys: improved debug information for Dialplan Application “Set”
[WMS-3348] – sys: presence statuses improvement in the phonebook and live search of WP2015-2017 and W-AIR handsets
Presence status is now shown for users of the system from phonebook and during live search
[WMS-3349] – sys: the contents of all phonebooks is now shown by default when entering Phonebook menu on WP2015-2017
Also ”Filter” soft key has been added inside Phonebook menu, allowing you to select a phonebook in which search must be performed
[WMS-3370] – col: increased size of web CRM iFrame depending on monitor
[WMS-3387] – col: phonebooks are now shown in alphabetic order by name
[WMS-3388] – col: focus is now automatically set to live search field after opening Collaboration
[WMS-3415] – wms: increased default jitter buffer for remote devices to improve call quality over Internet
[WMS-3592] – sys: openvpn keys are now always unique
[WMS-3659] – dev: added support for new range Mac addresses for W-AIR Base Outdoor

Fixes

[WMS-2854] – sys: fixed an issue with call being assigned to a wrong user in CDR for call answered via queue pickup function

[WMS-2935] – sys: fixed an issue in which login / logout using feature code 99 might not work for WP400 (otrs: 2017051810000318)

[WMS-2997] – wms: fixed an issue in which user with diacritic characters in name could not sync contacts using iOS CardDAV sync

[WMS-3034] – sys: fixed an issue with random wrong notification about new voicemail messages

[WMS-3058] – col: fixed a specific issue in which active device setting in Collaboration could be lost every minute (support ticket: 2017052910000351)

[WMS-3059] – sys: fixed an issue in which calls via trunks could stop working in high load conditions (10+ concurrent calls during several days) due to incorrect counter of license limitation

[WMS-3066] – sys: fixed an issue in which calls via Web phone might not work in some cases after changing network configuration (otrs: 2017070610000426)

[WMS-3072] – col: fixed an issue in which image preview for files were not displayed in chat after login to Collaboration on a different PC with many chat dialogues and file transfers present in chat history

[WMS-3074] – dev: fixed an issue in which “Colleague” BLF on WP480/490G 2017 displayed office number instead of external called number / name during an outgoing call of this colleague (ref: 2017070410000402)

[WMS-3075] – sys: fixed an issue in which users with deactivated call waiting could receive more than one call if device ringing arrived after second call

[WMS-3092] – wms: fixed an issue in which dialplan could stop working after applying backup of WMS 2.0

[WMS-3093] – dev: corrected a grammar mistake in German translation on WP 2016-2017 (otrs 2017070410000484)
Corrected “Anruf beendet”

[WMS-3106] – col: fixed an issue in which DND status was not automatically changed after user left video conference

[WMS-3117] – col: fixed an issue in which it was impossible to call numbers starting with # from Collaboration, because the symbol was not converted into ASCII code (otrs: 2017071410000223)

[WMS-3152] – sys: fixed an issue in which call transfer via feature code (#8 / #9) on call group with strategy “Call all: 32” did not work starting from WMS release 3.85

[WMS-3173] – sys: fixed one way audio for local devices with non-standard network addresses in some cases (additional fix for WMS-2580)

[WMS-3177] – sys: fixed an issue with calls generated using Any device being shown twice in CDR-View

[WMS-3184] – sys: fixed incorrect mobility timeouts processing with some Belgium operators

[WMS-3218] – col: fixed an issue in which double loader was displayed on history page after refresh

[WMS-3220] – col: fixed an issue with BLF Colleague keys were renamed to 0 after upgrade from 3.80 to 3.85 for BLF keys configured from Collaboration

[WMS-3223] – col: fixed an issue in which it was impossible to place a call via chat phone icon

[WMS-3229] – col: fixed an issue in which messages containing special characters inside angle brackets < … > could not be sent

[WMS-3232] – wms: fixed wrong ring order with linear and round robin strategy of call group (ticket # 2017081010000185)

[WMS-3234] – wms: re-enabled scheduled import for phonebook import from CSV for per user PBXs (excluding cloud PBXs)

[WMS-3236] – hotel: fixed an issue in which it was impossible to place calls from room with checked-in status using FIAS integration

[WMS-3244] – col: fixed an issue in which it was impossible to close the editing dialog box in phonebooks without saving the changes

[WMS-3248] – sys: fixed an issue in which SIP Proxy could not be upgraded if PBX was not activated

[WMS-3258] – sys: fixed an issue in which a call group member added dynamically via FC 97 was displayed with “Not in use” status during call (otrs 2017082210000162)

[WMS-3263] – col: fixed an issue in which fax sending in TIFF format failed using Collaboration and fax printer (ref: 2017082310000133)

[WMS-3271] – wms: fixed an issue in which it was impossible to save certain types of BLF keys after editing them, or a new value could not be applied for certain types of BLF keys

[WMS-3275] – col: called number field in IVR menu was made larger

[WMS-3286] – col: fixed an issue with with incorrect timezone when selecting grouping “by hour of day” in CDR-View

[WMS-3296] – wms: “export dialplan” feature now works correctly also when exporting big dialplans

[WMS-3300] – sys: fixed a misprint in voicemail email notifications in French
Corrected phrase – “Message vocale” in subject line

[WMS-3304] – wms: fixed an issue in which in some cases search for devices using Automatic provisioning mode could last forever

[WMS-3305] – wms: hyphen symbol is now supported in titles of Windows / NFS shares

[WMS-3342] – sys: fixed an issue in which it was impossible to view Voicemails on WP4X0 2015-2017 in case CallerID was in a format, different from “User name” <1234567890> (for example, in format 075216627) (ref: 2017090710000144)

[WMS-3352] – wms: it is no longer allowed to create users with same user names

[WMS-3367] – sys: fixed blind transfer via WMS network after call continuity

[WMS-3372] – col: fixed an issue in which office number was used instead of mobile during SMS sending from Collaboration in some cases

[WMS-3376] – sys: reduced callweaver logs verbosity
”warning” is no longer shown for trunks which are registered and working

[WMS-3381] – sys: improved user features module by additional checking for corrupted files
this improves the situation in which user could not log in or make calls, in case some files were corrupted in user preferences

[WMS-3406] – wms: fixed an issue with script /usr/local/bin/smsdrxcb.sh not being executed after incoming SMS in case apostrophe symbol was present in the message

[WMS-3413] – wms: fixed an issue in which it was impossible to set password for multiple selected users

[WMS-3416] – api: login change is now applied without having to reboot device
API documentation: LINK

[WMS-3421] – sys: fixed an issue with return from transfer on FXS gateways

[WMS-3431] – col: fixed an issue in which user, after being moved to a different PBX in WMS Network, could see himself / herself in Chat -> Recents

[WMS-3553] – sys: fixed an issue with calls not working in Collaboration for PBX using WBR0 interface

[WMS-3561] – col: fixed a crash on Safari using attendant console with VoiceOver on Mac OS (starting from Safari 11.0.X)

[WMS-3563] – col: fixed an issue in which it was possible to open the webcam in the edit picture dialog only once

[WMS-3605] – col: fixed an issue in which auto-away feature was still active even if after being disabled

Firmware

[WMS-2955] – dev: caller ID name support for W04FXO (W04FXO/W04FXO v. 5.01j)

[WMS-2992] – dev: new firmware for WP490EXT 2017 – 163.145.106.17
Graphical improvements

[WMS-3029] – dev: new firmware for WP490EXT 2015 – 153.145.105.229
– The backlight of the display is now synced with the phone

[WMS-3644] – dev: new firmware for WP410 2016: 50.145.6.136, WP480(G) 2015: 55.145.6.90, WP490(G) 2015: 59.145.6.129, WP480G 2017: 63.145.7.228, WP490G 2017: 67.145.7.97

  • Added Audio quality indication in case of Packet loss / Network problems / Critical network problems which help user understand when network problems cause bad audio quality
  • Added firmware upgrade of WP490EXT 2015, 2017 via provisioning (WP490G 2016-2017)
  • The backlight of WP490EXT 2015, 2017 is now synced with the phone (WP490G 2016-2017)
  • Added support for input of diacritic characters (acute, circumflex, tilde, umlauts…)
  • User can now scroll through the entire phonebook, regardless of number of records
  • Added support for calls to the Kite service initiated from Collaboration
  • Improvements for backlight settings
  • Improved left column BLF keys visualization on idle screen (only WP490G 2017)
  • It is now possible to use OK key (V key) to confirm actions in Phonebook sub menu
  • It is now possible to turn pages during search by long-press (over 2 seconds) on Navigation Down and Up keys (in Phonebook, History and during live search in Phonebook)
  • User can now correctly cancel an outgoing call after „Call completion“ (fixed an issue with WP not sending BYE message after processing REFER)
  • Fixed an issue in which WP4X0 could have audio issues during long calls due to short lease time set on DHCP server (due to continous NTP sync attempts)
  • Removed NTP Server 2 from the factory settings
  • WP display no longer turns on when BLF status of a user changes
  • Decreased priority of calls with SIP header “Call-Info: answer-after=0” (e.g. Intercom feature, Paging calls): in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call
  • Unified call waiting tone (as on other Wildix devices, relates to WMS-2453) (WP480G 2016-2017, WP490G 2016)
  • Graphical improvements (WP480G 2017)
  • Improved audio processing (WP480G 2017)
  • Fixed a provisioning issue present in new shipment (WP480G 2017)
  • Fixed a rare issue when calling echo test (WP480G 2017)
  • Fixed wrong IP address assigning (an issue in which phone was showing IP 10.10.1.xxx)
  • Fixed a German translation grammar error (related to WMS-3093)
  • Fixed hanging of the phone during the FW upgrade (WP410, WP490G 2017)

[WMS-3454] – dev: new firmware for BRI/PRI version 2.0.40.747
minor fixes and improvements

[WMS-3134] – dev: new firmware for W24FXSR2 version 27.18.01.13
fixed an issue with caller ID visualization and custom ringtones playback for different call classes

Other – these issues do not depend on WMS interface version and they are already available in Stable
[WMS-2919] – conf: released live streaming to FB / YouTube
Video tutorial: LINK

[WMS-3090] – api: added support for ERP SW incoming call notifications via wildix TAPI driver

[WMS-3106] – conf: fixed an issue in which DND status of user did not change after leaving the conference

[WMS-3119] – conf: video conference graphical and usability improvements

[WMS-3235] – api: fixed an issue in WebAPI demo code which allowed adding queue members with no extension causing ejabberd crash

[WMS-3264] – col: added support for dialing phone numbers which include letters in Chrome extension

[WMS-3277] – col: support of call control / mute via new Wildix WHS 2017 (with USB cord)
How-to: LINK

[WMS-3283] – api: fixed an issue causing agents added to a queue via wallboard API change their order after page refresh

[WMS-3297] – api: added documentation for Wildix web integration service library
LINK: https://github.com/Wildix/IntegrationService

[WMS-3326] – conf: resolution is now shown in camera settings

[WMS-3340] – conf: chat over video / screen sharing is now shown with opacity

[WMS-3347] – conf: server side recording
Notes:

  • Only one active recording per conference room
  • Recording cannot be launched simultaneously with live streaming from the same conference room
  • Recordings made by one user are not visible to others, but it’s possible to send the download link via chat
  • Video tutorial: LINK

[WMS-3356] – conf: it’s now possible to create video conference with & in topic
[WMS-3373] – conf: added connection quality for participants
Hover the cursor over the participant’s image to see the current Bitrate, Packet loss percentage, Resolution, Frame rate and other data

[WMS-3616] – kit: google analytics for Kite widget
you can now see real-time statistics of Kite (widget) events in your Google analytics panel; documentation: https://manuals.wildix.com/kite-events-monitoring-with-google-analytics/


Version 3.85.36942.23 Date: 13.10.2017

[WMS-3464] – sys: fixed an issue with random restart of sipproxy after the latest WMS version 3.85


callweaver Hotfix version 0.7.37040 Date: 11.10.2017

[WMS-3468] – sys: fixed an issue with distorted incoming audio on WP410 using paging multicast


sipproxy Hotfix version 4.2.10.36946 Date: 29.09.2017

[WMS-3409] – sys: fixed an issue in which FXS gateways could randomly lose SIP registration after WMS release 3.85


ejabberd Hotfix version 16.09.85-36876 Date: 27.09.2017

[WMS-3424] – col: fixed chat conferences which stopped working since hotfix 18.09


Hotfix version 3.85.36762.23 Date: 19.09.2017
WMS-3380 – sys: fixed file rotation to prevent shares and USB storage from running out of space
WMS-3383 – sys: fixed scenarios where XMPP server might not start correctly at boot


ejabberd Hotfix version 16.09.85-36754 Date: 18.09.2017

[WMS-3382] – col: fixed an issue with access to Collaboration after WMS release 3.85.36662.23
[WMS-3285] – sys: fixed an issue which could cause no device list and presences in Collaboration after a user was deleted from PBX and ejabberd engine restarted


Hotfix Version 3.85.36662.23 Date: 15.09.2017

[WMS-3350] – sys: fixed an issue in which a PBX could not connect to WMS network after factory default
[WMS-3197] – col: fixed an issue in which it was impossible to answer incoming calls from Collaboration if called user had a web phone and a third party device starting from WMS release 3.85


Hotfix Version 3.85.36515.23 Date: 29.08.2017

[WMS-3272] – sys: fixed wrong called name for outgoing calls via trunk for called numbers not present in phonebook, starting from WMS stable release 3.85.36497.23


Version 3.85.36497.23 Date: 25.08.2017

Improvement

[WMS-3250] – sys: improved recovery procedure for Cloud PBXs

Fixes

[WMS-3021] – sys: fixed an issue with call group manager receiving missed call notification in case another call agent answered or picked up the call, starging from WMS version 3.85.35473.20
[WMS-3259] – sys: fixed an issue in which caller name received from SIP trunk was not used for incoming calls in WMS version 3.85
[WMS-3262] – wms: fixed an issue in which PBX upgrade could not be completed in some cases, due to a missing file


SIP Proxy version 4.2.10.36405 Date: 13.08.2017

[WMS-3214] – sys: fixed an issue in which SIP Proxy could randomly fail to start after upgrade to WMS version 3.85


Version 3.85.36358.3 Date: 07.08.2017

[WMS-3213] – sys: temporarily disabled subscribe for MWI for W24FXS 2015 to solve the issue with random loss of SIP registration


New version of Italian sound package Date: 01.08.2017

[WMS-3156] – sys: fixed an issue with access to Voicemail via feature code 81 not working in Italian language with parameter “Announce date, time and caller phone number” enabled in Dialplan > General Settings, due to a missing audio file (otrs: 2017072410000384)


Version 3.85.36224.23 Date: 28.07.2017

Improvement

[WMS-3171] – sys: increased upgrade reliability over slow / high latency Internet connections for WMS release 3.85


SIP Proxy version 4.2.10.36138 Date: 27.07.2017

[WMS-3065] – sys: number of users is now updated automatically after they have been added via WMP

Other improvements / fixes:
[WMS-2549] – iu: windows integration utility deprecated
more information: LINK
[WMS-3054] – api: fixed an issue with slow access to WebAPI hotel manager if user had over 250 contacts in roster (otrs: 2017070310000584)


СallWeaver v. 0.7.36201, Date: 27.07.2017

[WMS-3144] – sys: fixed an issue with PBX engine hanging in some cases due to broken connection to MySQL backend

Additionally the following fixes/improvements have been released:

[WMS-3129] iu: fixed an issue with TAPI driver generating multiple registrations in some cases
[WMS-3120] kit: updated chat window design
[WMS-3114] – conf: fixed video conference issues:
– fixed an issue in which eternal guest could not attach files
– fixed an issue with low video quality in all resolutions
– fixed an issue in which local video could freeze after session refresh
– other fixes
[WMS-2942] – conf: video conference support of Chrome v. 60
[WMS-2760] conf: fixed an issue with chat in which letters were superimposed on the buttons in case of very long messages


SIP Proxy version 4.2.10.36102 Date: 18.07.2017

[WMS-3123] – sys: fixed an issue which could cause continuous restart of SIP Proxy on new Cloud PBXs with low number of users


Version 3.85.36000.23 Date: 12.07.2017

Fixes

[WMS-3046] – wms: fixed an issue with setting passwords on Users page
[WMS-3055] – wms: fixed an error notification in some cases after making changes and pressing “Save” on Call and chat history page starting from wms release 3.85
[WMS-3076] – wms: fixed an issue in which MySQL custom CDR port was not used for connection after WMS version 3.85.35158.16 (tk. 2017070610000382)
[WMS-3078] – wms: fixed wrong VM storage detection for pre-2016 chroot PBXs


Version 3.85.35961.23 Date: 06.07.2017

Fixes

[WMS-3049] – wms: fixed an issue in which it was impossible to edit NTP server settings on some cloud PBXs
[WMS-3050] – wms: fixed an issue in which it was impossible to manually set time on NTP server page
[WMS-3064] – sys: fixed an issue in which SIP Proxy was continuously restarting on cloud PBXs after upgrade to the last WMS stable 3.85.35914.23


Hotfix Version 3.85.35914.23 Date: 04.07.2017

[WMS-2494] – sys: fixed one way audio with TWT SIP trunk sip in some cases
[WMS-3027] – sys: improved SIP proxy service watchdog
[WMS-3036] – sys: fixed an issue in which presence status in Collaboration could stop working on WGW500 or bigger PBXs starting from WMS v. 3.84.35087.12
[WMS-3038] – col: fixed an issue with login “remember me” feature not working starting from WMS v. 3.85.35101.15


**RELEASE 3.85**

Version: 3.85.35885.23 Date: 28.06.2017

IMPORTANT: This release includes changes which require all PBXs in a WMS Network to be updated in order to use chat and presence.

Note: Starting from this version, access to Collaboration via WMP is not supported!

Features
[WMS-1704] – sys: provide direct RTP for WebRTC phone on Windows when possible (experimental)
[WMS-1927] – col: video from intercoms is now displayed immediately
Important: make sure Android / iOS apps, WP600AXX are updated to the latest stable versions.
[WMS-2372] – sys: added support for 2 factor authentication (2FA)
notes:
– available for Google Authenticator, Free OTP, Microsoft Authenticator or any other TOTP auth app
– available for Collaboration / WMS
– one-time password is valid for 90 seconds
– time on user device and on PBX should be synced according to time zones
– 2FA can be used for AD authentication
– 2FA can be enabled in user personal settings in Collaboration
limitations:
– WebAPI does not work if 2FA is enabled for user
– Integration Utility (TAPI driver) does not work if 2FA is enabled for user
– 2FA is not available for iOS / Android / WP600A apps
– login with 2FA is not available for Google / Office 365 single sign-on (it is supposed that user who doesn’t know his/her WMS password can use Google / Office 365 password)
– user can log in to a different PBX in WMS Network without 2FA even if 2FA is enabled
note: Google Authenticator / Free OTP apps doesn’t provide access pin, secret keys backup, sync or migration between devices, if you need such features, use other apps (e.g. Authy)

[WMS-2459] – dev: added default NPI support for PRI / BRI gateways
[WMS-2507] – sys: extended feature code “Hide Number” 92 with the possibility to activate / deactivate the service for all outgoing trunk calls
use 921 to activate / 920 to deactivate / 923 as auto-switch
service status change is shown as notification on the phone screen

[WMS-2527] – wms: added “Timeout” variable to Dialplan “Set” application
[WMS-2576] – sys: added direct RTP support between devices located in LAN networks larger than /24 behind the same router
[WMS-2581] – dev: VLAN support for W24FXS 2015
[WMS-2629] – col: added Estonian language
[WMS-2634] – wms: RTP keep alive packets are now sent during progress
[WMS-2640] – col: added web site and conference preview in chat messages
[WMS-2641] – col: “until” value is now optional while setting away/DND status
[WMS-2645] – col: IBM connections integration
More info: https://www.wildix.com/portfolios/ibm-domino-notes/
[WMS-2656] – col: added video preview from intercoms to Collaboration
How-to: add a Dialplan custom application “SIPAddHeader(Camera:URL)”, where URL is the path to the intercom videostream (JPEG format), examples:
SIPAddHeader(Camera:http://admin:meinsm@10.100.4.113/record/current.jpg?sync=-99)
SIPAddHeader(Camera:http://admin:admin1@10.100.4.44/snapshot/view0.jpg)
SIPAddHeader(Camera:http://admin:admin@192.168.1.100/picture0.jpg)
SIPAddHeader(Camera:http://www.testcam.local/camera/image.jpg)
SIPAddHeader(Camera:https://admin:mypassword@10.100.4.111/api/camera/snapshot?width=1280&height=960&fps=15)
note: only Google Chrome web browser is supported; door open button is coming in the next version, at the moment it is necessary to use DTMF to open the door

[WMS-2661] – sys: FIAS certification with Hoist group (Hotsoft)
More info: https://www.wildix.com/portfolios/hotsoft-8-of-hoistgroup-hotel-pms/

[WMS-2714] – col: support of Call Group / Group pick up / DTMF BLF keys in Collaboration -> Function keys menu
[WMS-2735] – sys: added a possibility to execute a script after receiving an SMS
how-to:

  1. Access PBX via SSH
  2. Copy template from /usr/local/share/scripts/ to working directory /usr/local/bin and rename file:
    cp /usr/local/share/scripts/smsdrxcb.sh.sample /usr/local/bin/smsdrxcb.sh
  3. Set result file as executable:
    chmod a+x /usr/local/bin/smsdrxcb.sh
  4. Fill script by user actions

 

[WMS-2765] – col: added ACL restricting presence
can/cannot Share status message via Kite
– can/cannot Share geolocation via Kite
– can/cannot View geolocation via Collaboration
– can/cannot Share geolocation with [select group]

[WMS-2776] – sys: Fias certification with Ericsoft
[WMS-2783] – col: it is now displayed when user is typing a message
those who use “Remember me” feature for login must refresh the Collaboration browser web page after the upgrade
[WMS-2792] – wms: added detection of any HDD to the Storages page, not only USB
[WMS-2821] – sys: FIAS certification with Direct Holiday
[WMS-2806] – dev: WP translation to Estonian
[WMS-2888] – col: support for headset integration over terminal server

Improvements
[WMS-710] – col: use web socket for chat and presence
notes:
– PBX must have domain name
– All PBXs in WMS network must be upgraded together (сhat and presence will work only on upgraded PBXs)
– Users lose their chat history after upgrade except for history saved in local storage
– Users who use locally installed wallboard/WebAPI must update WTAPI library in order to continue using these –
products
– Make sure you have installed the latest version of Android/IOS/WP600a application to correct work of chat/presences on them

[WMS-2587] – api: Wallboard is now integrated into WebAPI interface
use WebAPI interface for Wallboard, documentation: https://manuals.wildix.com/collaboration-webapi/#wallboard
[WMS-2433] – col: improved geolocation reliability
[WMS-2453] – sys: unified call waiting tone repeat time on different devices (W01/02FXS,W24FXS 2015, W-AIR, WP 2015)
[WMS-2516] – wms: refactoring of NTP server page
[WMS-2517] – col: form components updated to material design
[WMS-2549] – iu: Windows integration utility deprecated
more info: https://manuals.wildix.com/tapi-driver-for-microsoft-windows/
[WMS-2636] – sys: features set via phone (call to feature code) are now applied to all active classes if class not specified
[WMS-2544] – col: speeded up access to CDR-View for PBXs with over 200k phonebook contacts
[WMS-2548] – sys: WMS network Server replacement improvement
1. Move all users from Client (future Server PBX)
2. Disable wms-network on this Client
3. Delete this Client from PBXs page on Server
4. Make a backup on Server
5. Apply this backup on Client

[WMS-2647] – dev: date column alignment for history and Voicemail menus on WP2015-2017
[WMS-2648] – col: it is now possible to have up to 500 users in roster if more than 250 users are present on the PBX
[WMS-2651] – col: added live search for call forwarding destination setting in Settings > Features
[WMS-2654] – sys: support alternative SIP port for remote registration of W01FXS / W02FXS
[WMS-2680] – sys: disabled automatic mail notification in case SIP trunk is not registered and added an option to enable it in Dialplan -> General Settings
[WMS-2688] – col: added personal picture capture (Chrome / Firefox)
[WMS-2689] – wms: FTP back up server password is now hidden by default with the option to show it
[WMS-2690] – wms: networking / DHCP / language settings are now backed up, added option to apply networking settings during restore
[WMS-2715] – col: WMS and Collaboration minor graphical improvements
[WMS-2721] – sys: notification is now sent to admin in case the PBX is running out of free space
[WMS-2733] – sys: ACL rule “cannot use” -> “history” is now applied also for WP 2015
[WMS-2751] – col: webcrm improvements (force HTTPS if Collaboration was accessed via HTTPS)
[WMS-2752] – col: improvement of chat sync between devices of the same user
[WMS-2772] – sys: blue status is now shown for all users who have an active SIP phone
note: Wildix devices, excluding Windows TAPI and WebAPI
[WMS-2784] – col: removed seconds from duration in CDR-View XLS exports
[WMS-2786] – api: WebAPI improvements
only PBX domain name / IP is now required for access and HTTPS is now used by default
[WMS-2791] – col: improved phonebook menu error notifications in case incorrect number format is used
[WMS-2795] – wms: improved port selection for media gateways in “Dial trunk” Dialplan application
[WMS-2798] – dev: 12h format is now used on WP when AM / PM is selected
[WMS-2846] – sys: added push notifications removal script to PBX
Script: push_remove
Arguments:
push_remove -h -> display help
push_remove -list -> display list of extensions that subscribed to push notifications
push_remove 315 -> remove push notifications for extension 315
push_remove 315 316 317 -> remove push notifications for extensions 315, 316 and 317

[WMS-2847] – dev: W24FXS 2015 rollback improvements of ticket WMS-2161 (improved caller ID support for W24FXS 2015) since Gigaset analog phones stopped showing CID after upgrade
[WMS-2868] – wms: chat history sync is now on by default
Note: chat sync setting has been removed from CDR page
[WMS-2889] – col: attendant console improvements for visually impaired users: focus is now set to caller’s name in case of a new incoming call (in case accessibility voice-over feature is enabled)
[WMS-2894] – sys: return from transfer for calls transferred to a park orbit is now always enabled for the United States
[WMS-2924] – sys: reduced amount of presences sent to all clients when a new source is connected
Also fixes an issue with duplicate email for offline chat messages in some cases
[WMS-2985] – wms: removed \n \r from the contact name during phonebook import from MSSQL backend to avoid call refusal on WP and improve phonebook visualization (ticket: 2017061310000398)

[WMS-2988] – sys: improved sipproxy HTTP API performance to avoid system failures on big PBXs
[WMS-3006] – wms: fixed an issue with Collaboration replying 488 to INVITE with audio+video (Ticket 2017042810000113)
fixes an issue in which video streaming from 2N doorphone couldn’t be enabled after having established the call

Fixes

[WMS-2288] – wms: fixed an issue with impossibility to access wms interface due to slow CDR MSSQL connection
[WMS-2430] – dev: fixed an issue in which WP480 / WP490 could not connect to PBX if alternative TLS certificate was used
[WMS-2499] – wms: fixed an issue with SIP user-agent containing “/“ not being shown in Users menu
[WMS-2514] – sys: fixed an issue with VPN not activating after upgrade from WMS version 2.x to 3.x
[WMS-2555] – sys: ring tone set for phonebook contact is now applied also for calls to call groups
[WMS-2579] – wms: fixed an issue in which user preferences could not be saved from WMS if Popup URL field contained non-HTTP(S) link
[WMS-2591] – sys: fixed an issue with missed call being assigned to a wrong user using application dial the phone with music on hold option and mobility extension enabled
[WMS-2592] – col: link to download call recording file in call history is now available also for call recording enabled via Dialplan
[WMS-2598] – col: fixed an issue in which drag&drop transfer could not be interrupted even if the phone number was deleted
[WMS-2601] – col: fixed an issue in which after applying AM / PM time format settings user was logged out
[WMS-2615] – sys: fixed an issue in which CDR was off and domain was shown incorrectly in WMS after Cloud PBX first boot
[WMS-2628] – col: fixed an issue in which after SIP password change logout was needed to reconnect WebRTC phone
[WMS-2652] – col: fixed an issue in which CDR-View did not work in case access was made via WMP
[WMS-2653] – sys: fixed an issue with phone re-login using feature code 99 on FXS media gateway not working starting from WMS version 3.83.34402
[WMS-2670] – col: fixed an issue with impossibility to configure BRI/PRI/FXO trunks in case price list name is too long
[WMS-2668] – sys: fixed an issue with absent user name in missed call notification in case en_us language was selected
[WMS-2672] – col: fixed an issue in which audio device did not switch to system default in case the selected device was removed
[WMS-2681] – col: fixed an issue with one way audio for calls via Web phone in some cases after upgrade to stable release 3.84
[WMS-2694] – sys: fixed an issue with call transfer over wms network not working in some cases
[WMS-2696] – col: fixed an issue in which preview of some images & videos could not be displayed in chat
[WMS-2697] – col: fixed Post-It visualization in case of resizing browser window
[WMS-2711] – wms: fixed an issue with impossibility to answer conference call if “any” device was selected
[WMS-2716] – col: fixed impossibility to playback custom ringtone in case the audio file name contained special symbols
[WMS-2731] – col: fixed one way video issue in case video was initiated by the client whose phone does not support video
example: user initiated video via Collaboration while talking on WP4X0, in this case the second party could not see video
[WMS-2739] – wms: fixed visualization issue with missing buttons during upload of audio file in IVR in case of large IVR tree
[WMS-2748] – sys: hold / unhold events are now blocked for non-Wildix devices and Wildix FXS gateways to prevent hangups
[WMS-2761] – wms: open UDPTL port range over same interval as RTP port range
[WMS-2763] – iu: fixed an issue with auto answer for incoming calls after a few seconds on Jabra 9450 / 9450 PRO (Windows)
new version of Headset integration for Windows
[WMS-2796] – col: fixed position of Post-It
in some cases Post-It messages could be displayed outside the browser window
[WMS-2810] – sys: fixed an issue with Voicemail becoming unavailable after pbxengine failure during voicemail recording
[WMS-2812] – sys: fixed an issue with PPI / PAI SIP headers not being added during re-invite over SIP trunk (this issue was causing call termination with some VoIP operators)
[WMS-2815] – col: fixed an issue in which “Send SMS” button was always disabled in call history
[WMS-2823] – col: current timezone is now applied when grouping results “by Hour” in CDR-View
[WMS-2836] – sys: fixed an issue with scheduled backups not working in some cases
[WMS-2843] – sys: fixed a loop during fax sending in some cases
added global Dialplan variable: GFAXCONGESTION_TRY (default value=30)
[WMS-2851] – wms: fixed an issue with fetching mails test not working in some cases
[WMS-2893] wms: WMS network menu is now enabled even if PBX is not activated
[WMS-2918] – wms: fixed an issue in which user preferences could not be saved from WMS if Popup URL field contained non-HTTP(S) link (lost fix of wms-2579)
[WMS-2923] – sys: fixed an issue in which caller number was not displayed even if trunk supported it, in case of call forward “all” to external trunk (regression since version 3.83.33871.48)
[WMS-2969] – sys: fix RTPEngine startup issues on systems with VLAN interfaces
[WMS-2999] – col: fixed an issue with auto answer for incoming calls via Collaboration with Jabra 9470 in some cases with Headset Integration 2.1.4 on Windows
[WMS-3005] – wms: fixed an issue in which basic authorization window was displayed instead of login page in case user session was lost / deleted
[WMS-3008] – sys: fixed scheduled backup to FTP

Firmware

[WMS-2663] – dev: new firmware for W24FXSR2 version 27.18.01.12
what’s new:
fixed an issue of different rings according to Alert-info (internal, external, blacklist, whitelist, silent)
removed “+” from caller ID

[WMS-2849] – dev: new firmware for WP410 – 50.145.6.84; WP480G 2017 – 63.145.7.49; WP490G 2017 – 67.145.7.39; WP480(G) – 55.145.6.75; WP490(G) – 59.145.6.110

All models:
– Fixed an issue with displaying of 12-h time format
– fixed: no subscribe after “400 bad request” message
– fixed: TLS connection issue (WMS-2430: PBX used wrong SSL certificate for phone registration on port 443 if customer uploaded a custom certificate)
– GUI improvements

WP410:
– Fixed audio distortion issue at max volume level

[WMS-2929] – dev: W-AIR firmware package 0.38: fixes an upgrade issue of package version 0.37 for W-AIR Bases with FW version minor than 03.24.00.00 (regression introduced in WMS version 3.83.34260.03)


Hotfix Version 3.84.35624.12 Date: 02.06.2017
[WMS-2880] – sys: fixed an issue with incoming call push notification always using a silent ringtone after user enabled and then disabled the feature “ring only active device”
[WMS-2866] – col: fixed an issue with CDR-View access not working in some cases using MySQL / MSSQL CDR backend
[WMS-2882] – sys: fixed unexpected error in some cases during login with 99 code (regression after WMS version 3.84.34728.10)
[WMS-2891] – dev: fixed an issue with provisioning of W-AIR Base SB with firmware older than 3.55 not working starting from stable release 3.84.35087.12
[WMS-2892] – dev: fixed an issue in which it was impossible change login for W-AIR users in some cases after upgrade to stable release 3.84.35087.12
[WMS-2895] – dev: fixed an issue in which call waiting tone on WP for France interrupted (silenced) audio for 10 seconds after release 3.82.32387.27


Version 3.84.35497.12 Date: 25.05.2017

Improvements
[WMS-2702] – col: fixed an issue in which outgoing calls using Web phone did not work with some Dutch VoIP operators
[WMS-2847] – dev: W24FXS 2015 rollback improvements of ticket WMS-2161 (improved caller ID support for W24FXS 2015) since Gigaset analog phones stopped showing CID after upgrade

Fix
[WMS-2681] – col: fixed an issue with one way audio for calls via Web phone in some cases after upgrade to stable release 3.84


Hotfix Version: 3.84.35467.12 Date: 19.05.2017

[WMS-2708] – sys: fixed a problem with memory leak in sipproxy in some cases on some PBXs
[WMS-2781] – wms: fixed an issue with PBX local time not changing according to the time zone set in “Languages & Region” menu


Hotfix Version: 3.84.35456.12 Date: 18.05.2017

[WMS-2827] – dev: fixed an issue with low default volume level on WP410
[WMS-2819] – col: fixed an issue with Popup URL execution failing in some cases if URL contained tag variable


Hotfix version 3.84.35390.12 Date: 16.05.2017

[WMS-2755] – dev: fixed an issue in which W-AIR Base SB in some cases could not update FW starting from stable release 3.84.35087.12
[WMS-2774] – col: fixed an issue in which scrolling did not work for contacts, history and voicemail pages under Firefox

Firmware
[WMS-2811] – dev: WP410 – new firmware v. 50.145.6.75 (HD audio improvement)


Hotfix Version 3.84.35374.12 Date: 11/05/2017

[WMS-2741] – dev: codec g729 temporarily disabled for W-AIR SB to avoid base blocks in ver r355b24
[WMS-2766] – sys: fixed an issue in which encoding was set to G711a instead of G711u for PRI T1 interfaces
[WMS-2732] – sys: fixed an issue with language selected on language & region page not being applied for external calls in some cases, depending on SIP trunk parameters
[WMS-2669] – col: fixed an issue in which country code was not applied after saving changes on Language & region page
[WMS-2717] – col: added back notification about Edge browser not being supported
[WMS-2613] – sys: fixed an issue with attended transfer with call group strategy “call all 32” not working since last stable release 3.83
[WMS-2610] – sys: fixed an issue in which wrong user device status (ringing / talking / available) was displayed in some cases in Collaboration

Firmware
[WMS-2736] – dev: W-AIR Base firmware 0.37 resolves the issue with upgrade from package version 0.36 not working


Version 3.84.35241.12 Date: 21.04.2017

Improvement
[WMS-2684] – col: Colleagues and BLF tabs GUI improvements

Fixes
[WMS-2673] – sys: fixed an issue in which BLF subscription stopped working if device sent retransmissions for longer than 5 seconds (additional fix for WMS-2609)
[WMS-2692] – sys: fixed an issue with impossibility to select more than 1 sound package on Cloud PBXs starting from stable release 3.84


Date 14.04.2017

sipproxy version 4.2.10.35167

[WMS-2676] – sys: fixed an issue with could cause high memory usage in some cases after upgrade to the latest stable version


Hotfix Version 3.84.35156.12 Date: 13.04.2017

[WMS-2577] – sys: fixed an issue in which upgrade of PBXs with a big number of SIP trunks could not be completed in some cases
[WMS-2584] – col: fixed an issue with CID name look up in Outlook contacts not working in some cases after caller number normalization
[WMS-2580] – sys: fixed one way audio for local devices with non-standard network addresses after upgrade to stable release 3.83
[WMS-2664] – sys: fixed an issue which could cause blocking of web interface in case FTP server was not answering


Version 3.84.35087.12 Date: 10.04.2017

Features

[WMS-1834] – col: IBM notes / domino integration
integration includes: call, presence, start chat
[WMS-1835] – sys: call / IM push notifications on Android mobile app
to enable: upgrade Android app to the latest version
on some devices push notifications are blocked by default, it’s necessary to manually allow push notifications for:
HUAWEI: Settings->Protected Apps, enable the option for Collaboration and restart the app
XIAOMI: Security->Autostart, enable the option for Collaboration and restart the app
to disable push notifications: set up „offline“ status or log out from the app
for correct work of push notifications
:
– a direct, unproxied connection to the Google Cloud Messaging server on ports 5228, 5229 and 5230 from smartphone is necessary
– PBX must be connected to the internet and be able to communicate with push.wildix.com server
Limitation: chat messages won’t be delivered if they contain more than 900 symbols

[WMS-2056] – col: new file / image sharing
what’s new?
– file sharing on browsers not supporting point-to-point file transfer (IE, Edge, Safari)
– file preview
– file size: max 100Mb
– for files bigger than 100Mb, p2p file sharing is used on supported browser (Chrome)
– support for iOS / Android is coming later with new apps versions

[WMS-2110] – wms: added Dialplan application “Jump to if”
added a drop-down list with four default options / possibility to enter your own option
[WMS-2184] – col: added date and time format parameter for the US market (Settings > Personal)
Note: W-AIR handsets have their own settings for time/date format and it has to be set manually on a handset

[WMS-2216] – dev: support for multi site W-AIR installations with local PBX
– enables the possibility to create W-AIR network between different sites of the company connected via VPN, where all the bases are provisioned to the Server PBX while W-AIR handsets are registered to local PBXs and it’s possible to travel between the sites of the company without having to re-register the handsets
– added 2 new parameters in Devices > W-AIR Networks -> Edit network: “SIP Proxy” (optional, by default, provisioning domain, “auto.wildixin.com”) and “Primary Base IP” (optional, to be used for cloud installations)

[WMS-2226] – api: added call history to vTiger web app
[WMS-2262] – col: updated chat window design
[WMS-2263] – col: added auto logoff in case two sessions are open
[WMS-2281] – col: support for pop-up and user personal pictures in Outlook
– clicking on a link opens an existing contact or creates a new one
– note: Outlook must be running

[WMS-2313] – sys: new call continuity feature
“Continuity” *5 has been added to the “Services” section of Feature Codes
To enable the feature code, click “Save” on the Feature Codes page
How-to: during a call, dial *5 from one of the devices registered to your account, to pick up the call and continue the conversation from that device
limitation: feature does not work for Mobility and for calls in “ringing” state
note: old Continuity service is also supported (Feature Codes > Incall features > Continuity)

[WMS-2319] – col: added support for CID name lookup in Outlook for incoming calls and from live search
Feature has been added to “Outlook integration”
[WMS-2321] – sys: added support for diversion – history-info headers for SIP trunks
[WMS-2327] – wms: added search to call group / IVR / Timetable / switch / 3 state switch menu
[WMS-2348] – wms: added option to set up default prefix for feature / service codes (for example *)
in WMS > Dialplan > Feature codes
[WMS-2350] – wms: added menu for language & region settings
WMS Settings > PBX > Language & Region
[WMS-2352] – dev: enabled G729 for W-AIR SB
[WMS-2373] – sys: added option “Allow only Single Sign-On” in Users Import
option added for AD / Domino; if enabled, login of users to Collaboration with WEB password is not possible
[WMS-2397] – sys: added automatic notification to admin email in case SIP trunk is not registered
[WMS-2402] – col: auto set status to away after x minutes of inactivity on local Windows PC (beta)
[WMS-2414] – sys: zabbix server sensors support
documentation: https://manuals.wildix.com/monitor-wildix-pbx-using-zabbix/https://manuals.wildix.com/monitor-wildix-pbx-using-zabbix/
[WMS-2571] – sys: disable return from transfer by default for United States and follow forwarding rules set by the user
[WMS-2586] – wms: added per user licenses visualization
added correct amount of users / lines
[WMS-2602] – dev: show 12/24 time format on WP 2015 idle screen based on user settings

Improvements

[WMS-2132] – wms: refactoring and design improvements of the SMTP client page
[WMS-2150] – sys: optimized usage of Callweaver resources
[WMS-2171] – sys: optimized Dialplan execution load
[WMS-2172] – sys: automatic backup of sounds is now executed during scheduled backup to FTP / network share
[WMS-2157] – sys: support for callkit, pushkit, sirikit and IM push notifications for iOS app
note: support for these features is coming soon with the new iOS app version!
[WMS-2180] – sys: interdigit timeout is now applied for feature codes “read” timeout
[WMS-2235] – wms: show networking parameters in “read only” mode for Virtual systems
[WMS-2316] – sys: improvements for feature codes management
shortcuts format to set up feature codes:
*1/0/3* – enable/disable/autoswitch feature for specified call class
*2** – set up value for specified feature (like timeout or destination number, if destination number is empty, Voicemail is applied)
*1/0 – enable/disable feature for all available classes
*2* – set up feature value for all available classes
*3 – enable feature for all available classes if feature is disabled for at least 1 call class/disable feature for all available classes if feature is enabled for all available classes
notes:
when Feature code status is changed, current additional value is no longer deleted (like destination number or timeout)
when calling to using IVR menu, status change is applied for internal call class only.

[WMS-2330] – col: video conference join improvements
note: closing the conference by user who created it, does not destroy the conference room
[WMS-2336] – dev: added tone zone setting for 01-02 FXS gateways
WMS Devices > Edit
[WMS-2355] – col: reduced min frequency of call waiting beeps in case of many incoming calls
[WMS-2364] – col: show full user status as tooltip in live search and chat contact detail
[WMS-2381] – col: dialogs updated to material design
[WMS-2384] – wms: “enable registration” parameter in SIP trunks with host “dynamic” is now “off” by default (applied for only newly added / edited trunks)
[WMS-2385] – col: “App integration” from Integration utility settings (TAPI driver) has been moved to Collaboration settings
notes:
– in case previously configured, settings are available in read-only mode
– now popup app must be configured in Collaboration Settings > Personal, “Popup URL / App”

[WMS-2386] – col: chat interface graphical improvements
[WMS-2388] – sys: the system allows the last call group member to leave the group after notifying the user that he/she is the last one
[WMS-2401] – wms: “Auto Dect Tree” parameter has been moved to W-AIR networks parameters
[WMS-2420] – sys: possibility to use LAN interface for sync_pbx failover
[WMS-2442] – sys: a syntax error present in custom application no longer prevents Dialplan procedure execution
[WMS-2443] – sys: remote phone can now play ringtone even if port 80 is closed on PBX
443 or custom secure port is used
[WMS-2448] – sys: improved USB initialization procedure
[WMS-2463] – sys: support of phonebooks over port 443 for W-AIR if no other secure port is set in SIP-RTP
[WMS-2479] – col: missed calls with “busy” status are now shown when filter for missed calls is applied in History
[WMS-2515] – wms: new line is present in contact name, is now removed during phonebook import
[WMS-2522] – wms: call group wrap up time by default is now set to 0
[WMS-2539] – sys: spam DNS settings improvements
[WMS-2543] – sys: improved POS / modem support over PRI / BRI media gateways
[WMS-2565] – col: 16:9 format is now used for preview of images during file transfer
[WMS-2570] – col: Collaboration reconnection improvement
[WMS-2573] – sys: new user features defaults
”Call Forward Busy / No Answer” are enabled by default with destination VOICEMAIL, external / whitelist / blacklist are disabled by default, “Mobility” is disabled (with timeout 10 seconds), “Call reject” is enabled by default for DND
[WMS-2583] – col: added drag&drop over Function keys tab elements
supported function keys: colleague, park location, speed dial
Fixes

[WMS-2046] – sys: fixed an issue in which video could freeze from time to time during calls between WebRTC web phones
[WMS-2282] – sys: fixed an issue with return from transfer not working during pre-answer services for semi-attended transfer
[WMS-2304] – col: fixed an issue with incoming faxes received using Dialplan application “detect fax” being displayed in history in red color
[WMS-2341] – sys: fixed an issue with Mail2SMS / Mail2Fax not working if mail did not contain content-type header
[WMS-2349] – sys: security improvement for internal SMTP client on cloud PBXs
[WMS-2376] – col: microphone usage permission is no longer asked even if no Collaboration license is available
[WMS-2377] – col: fixed an issue with voicemail tab being displayed (and showing no entries) in some cases even if Collaboration license was not available
[WMS-2383] – sys: fixed an issue in which SMS sending through remote PBX did not work for missed call notifications
[WMS-2410] – col: fixed an issue with login via Google account using Wildix Collaboration app
[WMS-2422] – sys: fixed wrong number normalization using hot dialing key on Windows / Mac OS
[WMS-2429] – sys: fixed an issue with push notifications not being delivered on iOS devices if delay between notifications was more than 2 hours
[WMS-2431] – sys: fixed call drop issue in some cases using call group strategy “call all 32” with the last stable release 3.83
[WMS-2436] – col: CDR-View fixes
fixed an issue in which some users were duplicated in search and search by surname did not work reliably
[WMS-2435] – sys: fixed an issue in which it was impossible to change user of a single W-AIR phone, in case user had several W-AIR phones registered to a W-AIR Base SB
[WMS-2441] – wms: fixed wrong visualization of call logs in Debug menu in some cases
[WMS-2449] – col: fixed an issue in which it was difficult to select device in Collaboration since device list often closed automatically
[WMS-2468] – sys: fixed wrong matching of local networks that could lead to missing audio issue from remote device
[WMS-2472] – col: added speech recognition for chat with Kite users
[WMS-2473] – col: fixed an issue in which URL link was not clickable from chat after login from another PC
[WMS-2482] – wms: fixed an issue in which “from user” field was not used during SIP trunk registration if “from domain” was empty
note: if domain field is empty, value indicated in “auth ID” is used in “from” field
[WMS-2486] – sys: fixed wrong BRI / GSM / FXO trunk status for BLF keys
[WMS-2488] – wms: fixed an issue in which multi editing of users preferences worked incorrectly for classes configuration
[WMS-2497] – sys: added possibility to use port 2222 for sync_pbx failover
[WMS-2498] – col: fixed issue in which Windows users whose user names contained umlauts and accents could not use CDR-View
[WMS-2509] – col: fixed an issue in which pressing shift-7 on MAC OS using French keyboard inside transfer dialog caused hangup
[WMS-2531] – wms: fixed an issue in which users with type “room” were not added during CSV import
[WMS-2536] – wms: fixed an issue with “Play sound” application not working for files added by double click
[WMS-2547] – col: fixed an issue in which user could not access Collaboration after changing password in WMS
[WMS-2552] – sys: fixed an issue with call classes recognition for W24FXS 2015 starting from WMS v. 3.83.33737.47
[WMS-2557] – sys: fixed an issue in which Wallboard could restart in some cases on Cloud PBX
[WMS-2597] – col: fixed an issue in which calls via web phone did not work on per-user PBX with big number of user licenses
[WMS-2609] – sys: fixed an issue in which BLF subscription stopped working if device sent retransmissions for longer than 5 seconds
[WMS-2617] – sys: force NTP zone Europe/Berlin in device NTP settings if in previous release time zone was set to GMT+1:00
[WMS-2638] – sys: fixed wrong time on WP600 pre 2015 with new format of time zone setting

Firmware

[WMS-2625] – dev: new firmwares for WP410 – 50.145.6.72; WP480(G) – 55.145.6.70; WP490(G) – 59.145.6.102; WP480G 2017 – 63.145.7.38

– fixed an issue causing the phone to lose connection for a long time (>15 min) after changing WAN-IP or disconnection on the router’s WAN port in case of TCP/TLS connection
– translation improvements
– fixed XML Browser delay issue
– support for selecting menu item by pressing digits
– input of “+” by long pressing of “0”
– support of caller images on WP480G / WP490G 2017


Version 3.83.34926.03 Date: 21.03.2017

Features
[WMS-2343] – dev: support for voicemail LED notification on W24FXS 2015
polarity reversal for phones supporting 90-volt neon MWI
[WMS-2546] – sys: added SSH auto ban feature for Cloud / VM systems
[WMS-2568] – col: messages received / sent from other devices are now displayed in chat history of Collaboration

Fixes

[WMS-2564] – sys: fixed crash which could occur in case user logged in to queue via WebAPI during an incoming call and tried to answer the call
[WMS-2572] – sys: fixed an issue in which audio calls with codec g729 from trunk might not work in some cases after WMS v. 3.83.34820.03


Hotfix version 3.83.34820.03 Date: 14.03.2017

[WMS-2329] – col: fixed an issue with “0” being prepended twice to called number with TAPI driver (IU) if Collaboration license was not enabled
[WMS-2457] – sys: fixed an issue in which Dialplan configuration could not be modified in some cases after WMS upgrade
[WMS-2477] – sys: fixed web server deny of service issue in case of request with a big payload
[WMS-2500] – sys: fixed video call issue from Chrome beta (ver 57) to WP600ACG
[WMS-2524] – sys: increased wait dial time for R+1 feature allowing users to end active calls on W24FXS 2015
[WMS-2532] – sys: fixed high load on CPU on Devices page of WMS with over 500 devices

Firmware

*[WMS-2529] – dev: new firmware for WP410 – 50.145.6.69; WP480(G) – 55.145.6.68; WP490(G) – 59.145.6.100; WP480G 2017 – 63.145.7.36
– translation improvements
– fixed XML Browser delay issue
– added support for selecting menu item by pressing digits
– added input of “+” by long pressing of “0”
– support of caller image on WP480G 2017
* this package has been temporarily removed from rel380


Hotfix version 3.83.34626.03 Date: 28.02.2017

[WMS-2099] – sys: fixed wrong notification about new voicemail messages
[WMS-2311] – sys: fixed an issue with fax sending being interrupted after some minutes using SIP trunk VoipVoice
[WMS-2380] – dev: fixed an issue with call group pickup via BLF key not working correctly on pre 2015 WP starting from WMS v. 3.82
[WMS-2417] – col: fixed an issue in which it was impossible to change features in Wildix iOS app on iOS 10
[WMS-2462] – col: fixed an issue with empty phonebooks after upgrade to WMS v. 3.83 in some cases
how-to-fix: upgrade to this version -> apply backup -> reboot PBX
[WMS-2454] – sys: fixed an issue in which PBX could stop accepting incoming calls from SIP trunks in some cases after upgrade to WMS v. 3.83

Firmware
[WMS-2342] – dev: new firmwares for WP410 – 50.145.6.64; WP480(G) – 55.145.6.64; WP490(G) – 59.145.6.96; WP480G 2017 – 63.145.7.33

– fixed an issue with phone registration status (V) blinking in idle mode when phone failover was enabled and Client PBX was unavailable
– XML browser speed improvement


Hotfix version Date: 22.02.2017

cw package 0.5.34546

[WMS-2425] – sys: fixed an issue with license not being renewed on restart of callweaver in case of no Internet connection on HW PBX Per-user


Hotfix Version 3.83.34501.03 Date: 14.02.2017

Improvement
[WMS-2353] – dev: improved DST feature for W-AIR bases
Fixes
[WMS-2409] – sys: fixed an issue in which BLF and voicemail notifications did not work reliably if PBX DNS server was not used after update to version 3.83
[WMS-2399] – sys: addressed an issue causing temporary loss of SIP trunk registration in some cases
Firmware
[WMS-2400] – dev: new firmware for WP490(G) 2015 – 59.145.6.93; WP480G 2017 – 63.145.7.29;
what’s new?
WP490(G) 2015:
– fixed an issue with FW update from v. 59.145.6.8

WP480G 2017:
– minor improvements and fixes
– audio quality improvement
note: user pictures are not yet supported

[WMS-2378] – dev: new firmware for W04FXO/W04FXS v. 5.01i
Fixed an issue in which W04FXS in some cases could not accept incoming calls using click2call feature in Collaboration


Hotfix Version 3.83.34458.03 Date: 09.02.2017

[WMS-2368] – sys: fixed paging call pickup issue
[WMS-2392] – sys: added enabling DND status by long-pressing on a star * key for WP480G 2017
[WMS-2391] – sys: improvement for BLF labels visulazation for WP480G 2017
[WMS-2379] – sys: fixed an issue with system not starting after 2nd execute of recovery procedure
[WMS-2389] – sys: fixed call drop issue after semi-attended transfer to a call group
[WMS-2390] – sys: fixed wrong caller ID information after hold / resume
[WMS-2394] – sys: fixed calls interruption issue using Web Phone in some cases


WMS Stable version 3.83.34402.03 Date: 6.02.2017

Features
[WMS-1612] – sys: added call classes support for US and Canada
[WMS-1682] – col: added Outlook presence and click2call integration
Documentation: manuals.wildix.com/outlook-integration
Video: https://youtu.be/qNLdaSBp3ZU
[WMS-1760] – sys: support of DST and timezone for FXS media gateways
[WMS-1831] – sys: support per PBX crypto key for encryption of signalling on W01/02FXS
[WMS-1886] – wms: added disconnection reason parameter to hang up application
[WMS-1892] – wms: office 365 users import and sign on
[WMS-1893] – sys: add support for admin / user level DTMF actions and mute all during PBX audio conference
note: added conference IVR menu with following options (pressing keys during conference)
*1 – Toggles mute on and off of the current user
*2 – Exit the conference
*3 – Allows the Admin to mute/unmute all other participants
Admin can be set by calling the conference number like user callerID or via Dialplan by variable Set(CONFBRIDGE(user,admin)=yes)

[WMS-1902] – col: Collaboration is now automatically opened when actions are requested by Windows / Mac integration service
[WMS-1941] – sys: added support for local time visualization in history and Voicemail for WP 2015
[WMS-1948] – api: isRecorded() now returns “true” also for system started recordings
[WMS-1949] – col: added support for custom contact ringtone in phonebook
[WMS-1958] – wms: added option rport in trunks configuration
[WMS-1959] – col: support for copy and paste in DTMF dialog
[WMS-2007] – col: kuando busylight integration
more info: https://www.wildix.com/portfolios/kuando-busylight/
Video: https://www.youtube.com/watch?v=vve6epORN3Y

[WMS-2028] – sys: tags variable can now be referred as ${TAGS}
[WMS-2012] – col: added system shortcuts to allow opening of Collaboration and Attendant console from any application
Install Integration service in Settings > Extensions and set up “Dialing hotkey” in Settings > Personal

[WMS-2038] – wms: added support for concatenation of strings during phonebook / users import
[WMS-2039] – wms: added import of “other contacts” phonebooks from Office 365
[WMS-2069] – col: sound playback improvement for user ringtones
[WMS-2083] – col: added link to documentation (Other > Help)
[WMS-2109] – sys: dial by name feature
Notes:
feature works only for EN-US language
feature is available via IVR (added Dialplan application “Dial by name / directory”) or phone phonebook search
added ACL “cannot” – “be via lookup via dial by name”
In order to be looked up via this feature, users must have their Name recorded in Voicemail (call 81, select 0, select 3 to record your name)

[WMS-1966] – api: alert call support for any Dialplan execution in place of hang up
[WMS-2107] – sys: support TAPI driver actions over WMS network
[WMS-2200] – sys: added sensors for number of calls, phone users, Collaboration users
[WMS-2137] – sys: added option to archive / delete calls in Collaboration
note: it’s possible to archive/delete calls from Collaboration History; restrict users from deleting calls via ACL “cannot” – “delete calls”

[WMS-2258] – api: added support for sign-on via Active Directory and login via username / email / name
[WMS-2220] – wms: added support for device connection via portal
[WMS-2228] – dev: W04FXO support for China Telecom
[WMS-2192] – col: added timetables / switches / trunks BLF for monitoring via Function keys menu
[WMS-2221] – sys: added sign-on of users and import contacts via Lotus Domino
[WMS-2168] – sys: device selection feature
notes:
– added option “ring only active device” – it is “on” by default for all users
– added feature code “Ring only active device” (68)
– to disable the option: dial 68*0
– during an incoming call only the selected device rings, other devices registered to the account receive a silent call
– if the previously selected device is offline all the registered devices ring
Video: https://www.youtube.com/watch?v=KYxlvfWmp5g&feature=youtu.be

Improvements
[WMS-1854] – sys: use correct PBX contact address instead of Wildix in “notify” messages sent to devices
[WMS-1895] – sys: support of more than 1 simultaneous mobility call
[WMS-1937] – sys: start whoteld via unprivileged user
[WMS-1951] – col: translation improvements
[WMS-2018] – wms: added option to enable wideband codec in SIP-RTP for Cloud PBXs
[WMS-2020] – col: increased max height to improve call dialogs visualization
[WMS-2025] – col: all available phone numbers of contact are now displayed in live search in Attendant Console
[WMS-2027] – col: screen sharing improvements
what’s new:
– try reconnecting to the remote desktop if connection was lost on the viewer’s side
– show progress bar during reconnection on the viewer’s side
– minor design and usability improvements

[WMS-2030] – sys: improved system recovery menu
[WMS-2032] – col: added DTMF confirmation sounds
[WMS-2045] – sys: WP Dutch translation improvements
[WMS-2051] – sys: simplified AGI scripts creation
example: https://manuals.wildix.com/dialplan-applications/#other

[WMS-2075] – col: added region Trentino-Alto Adige for Italy in phonebook
[WMS-2080] – col: it’s now possible to access CDR-View even if port 8888 is used by another program on local PC
[WMS-2082] – col: make phonebook short numbers dialable
[WMS-2104] – wms: added internal call class to the list for ACL rule “cannot call”
[WMS-2106] – sys: improved Austria / Netherlands call classes and added Luxembourg
[WMS-2118] – col: value entered in “period” filter is no longer erased when “update” button is pressed in CDR-View
[WMS-2122] – sys: WP4X0 English and German translations improvements
[WMS-2147] – wms: trunks are now displayed in alphabetical order in Dialplan application “dial the trunk”
[WMS-2148] – sys: disabled TFTPD server
[WMS-2161] – dev: improved caller ID support for W24FXS 2015
[WMS-2163] – wms: show DHCP server settings for VM in chroot environment
[WMS-2167] – wms: when “Auto discover external IP” option is enabled in SIP-RTP, external IP is now displayed in real time without the need to refresh the web page
[WMS-2176] – sys: added en-us language to Dialplan application “Set”
[WMS-2179] – sys: feature code status is now changed for all active classes if user does not specify call class with feature code
how-to:
change feature code for specific call class: enter a string in format 61*1*0, where 61 is Feature code (Busy call forward), 1 is “enable”, 0 is “internal” call class, and send a call
change feature code for all active call classes: enter a string in format 61*1 (without specifying call class), or call feature code 61 and follow audio instructions
notes: 0 – internal, 1 – external, 2 – blacklist, 3 – whitelist call classes

[WMS-2185] – sys: date and time is now shown in call history on WP 2015
[WMS-2189] – sys: SIP trunk configuration is now automatically reloaded after changing of Public IP address
[WMS-2190] – col: graphical and usability improvements
[WMS-2211] – sys: added Dialplan global variable VOICEMAIL_DELETE=X allowing auto deletion of voicemails after X days
List of Dialplan variables: https://manuals.wildix.com/custom-global-dialplan-variables/

[WMS-2234] – dev: registration expire for W-AIR base is now set to 600 s
[WMS-2250] – col: duration of “auto login” feature extended to 15 days
[WMS-2256] – sys: Mail2SMS now works also in case SMS body is entered in the same line as the field “Message”
[WMS-2268] – sys: correct call class recognition for French telephone prefix 09
[WMS-2278] – sys: power LED is now off by default for WP 2015
[WMS-2279] – sys: added new provisioning parameters for PRI gateway for the USA compatibility
[WMS-2286] – dev: improved BLF label visualization on WP 2015
only user name is now displayed

[WMS-2287] – col: “0” is now removed from called number if preceded by international prefix when using hot key dialing
[WMS-2297] – sys: play music on hold instead of ringback after attended transfer to Park Location user
[WMS-2308] – sys: increased certificate rating
[WMS-2310] – sys: improved Premium call class for Germany
numbers starting with “180” are now considered Premium 2

[WMS-2328] – col: added the possibility to add one call to an audio conference and new calls to existing audio conferences

Fixes

[WMS-1947] – sys: fixed memory usage and fragmentation issues
[WMS-1962] – sys: semi-attendant transfer to user with mobility enabled now works correctly
[WMS-2001] – sys: fixed missing trunk info for answered calls in CSV export
[WMS-2003] – dev: GUI translation corrections of WP4X0
[WMS-2006] – col: fixed an issue in which it was impossible to call a conference via Google extension from Email invitation
[WMS-2008] – sys: fixed an issue with empty regstatedb in some cases
[WMS-2016] – wms: fixed wrong visualization of IP registration source for remote devices in users / devices menu
[WMS-2031] – sys: fixed black screen on WP600AXX after call is put on hold in some cases
[WMS-2043] – sys: improved Voicemail menu usability
[WMS-2048] – sys: fixed an issue with assigning a missed call to wrong user if call group strategy is different from “call all”
[WMS-2050] – sys: fixed an issue in which SSRC could be changed even in case “force static SSRC” option was enabled in SIP trunk settings
[WMS-2053] – col: * and # can now be used in a number during transfer
[WMS-2054] – wms: global park timeout is now working correctly
[WMS-2055] – sys: fixed an issue in which it was impossible to change user status to “away” using feature code 602
[WMS-2057] – wms: fixed an issue in which after license activation some WMS menus could remain disabled
[WMS-2060] – sys: Dialplan application “verify number of calls” for outgoing calls to trunk now works correctly
[WMS-2061] – sys: fixed an issue in which trunk with transport “auto” (dns ptr-srv) did not work in some cases
[WMS-2063] – sys: fixed an issue in which PBX with hotel integration did not process DND event from bticino/fidelio software in correct way
[WMS-2065] – sys: fixed an issue with wms_parsemail not recognizing email address in some cases
[WMS-2067] – col: fixed wrong French translation in CDR-view menu
[WMS-2070] – sys: fixed an issue with call completion not working in some cases
[WMS-2079] – wms: translations improvements
[WMS-2091] – col: fixed an issue in which it was impossible to send fax using fax cover with company logo in wrong format
[WMS-2098] – col: fixed an issue with video still streaming in case call is on hold
[WMS-2099] – sys: fixed wrong notification about new voicemail messages
[WMS-2101] – sys: option “playback tones while entering number” now works correctly for WP 2015
[WMS-2108] – sys: support of paging on different network (2n support)
[WMS-2115] – col: fixed voicemail management issue after PBX connection was lost
[WMS-2124] – sys: fixed no audio issue on remote Wildix devices if SIP ALG was active and third party devices were connected
[WMS-2128] – col: groups are now displayed in alpha numerical order
[WMS-2129] – sys: lookup in specific phonebook now works correctly using Dialplan application “Lookup caller name in phonebook”
[WMS-2140] – sys: fixed an issue with DNS failover not working because devices used IP address instead of domain *wildixin.com during provisioning
[WMS-2142] – col: fixed an issue in which it was impossible to edit colleagues list in collaboration if ACL rule “cannot view everybody” was applied
[WMS-2145] – wms: fixed an issue with provisioning of WP410 2015 not working via HTTPS with FW v. below 50.145.6.41
[WMS-2146] – col: fixed an issue in which it was impossible to resume a call on hold does using web phone in case two calls were present
[WMS-2149] – col: fixed an issue with impossibility to call a contact in case name contained not closed parenthesis
[WMS-2156] – col: fixed an issue with some messages being displayed as unread each time after history exchange on mobile applications
[WMS-2175] – sys: fixed an issue with displaying extension number instead of office number during call forward to external number
[WMS-2181] – col: fixed an issue with chart export in CDR-View
[WMS-2182] – sys: fixed an issue in which calls did not work due to missing DNS entry auto.wildix.com for LAN interface of PBX
[WMS-2196] – sys: fixed an issue in which “deny unknown clients” resulted disabled by default in DHCP settings after PBX reboot
[WMS-2198] – sys: fixed missing call notifications via email for external call class
[WMS-2218] – col: fixed an issue in which popup notification remained after answering a call
[WMS-2219] – col: fixed an issue in which feature keys tab disappeared after page refresh using Firefox
[WMS-2222] – sys: fixed missing voice message when calling a full mailbox
[WMS-2227] – col: fixed an issue with empty call history in Collaboration using Sqlite CDR on old HW PBX
[WMS-2230] – col: fixed an issue with missing call popup after applying backup on PBX in WMS network
[WMS-2231] – sys: set default nameserver in case of Cloud PBX to avoid an issue with some services not working correctly due to wrong value
[WMS-2245] – col: fixed an issue in which user preferences could not be saved in WMS if function key label contained special characters
[WMS-2252] – col: fixed an issue with failed file transfer in case browsers could not exchange data directly (browser has not been reloaded for a long time)
[WMS-2267] – sys: fixed an issue with offline messaging not working for messages sent from Android app
[WMS-2283] – sys: fixed an issue in which music on hold did not work in some cases execute executing PBX sync replication script
[WMS-2284] – sys: support for wildixin.com domain for DNS failover
[WMS-2276] – sys: fixed an issue with Mail2Fax not working in some cases using multi-function printer
[WMS-2280] – sys: fixed wrong status in fax delivery report if 0 pages were sent
[WMS-2293] – col: fixed an issue where in some rare cases chat messages were never marked as read
[WMS-2294] – sys: trunk status monitoring via BLF key on WP4XX / WP600AXX now works correctly
[WMS-2307] – sys: updated DNS info for wildixin.com
[WMS-2320] – sys: fixed an issue with impossibility to access phonebook on WP 2015 using MySQL in some cases
[WMS-2326] – sys: added fixes ensuring Web phone compatibility with Chrome 57 (dev)
[WMS-2329] – col: fixes an issue with “0” being prepended twice to called number with TAPI driver (IU) if Collaboration license was not enabled
[WMS-2337] – sys: fixed missing “cn={4}wildix.ldif” file during LDAP upgrade reproducing in some cases
[WMS-2345] – sys: fixed an issue with users receiving offline email notifications for Kite chats which had been read or transferred
[WMS-2338] – col: fixed an issue with some chat messages not being displayed in history
[WMS-2357] – dev: corrected a misprint in WP XML browser in Italian

Firmware

[WMS-2233] – sys: new firmware version 04_5_01h for W04FXO
what’s new: Fixed an issue in which lines remained occupied in some scenarios using Fastweb operator

[WMS-2309] – dev: new FW for W-AIR Base and W-AIR Base SB v. 03.55.00.24
what’s new: Fixed wrong port used in XML phonebook in case secure port is greater than
32700

[WMS-2257] – dev: new FW for W24FXS 2015 v. 27.18.01.11
what’s new:
– Fixed DTMF delay issue
– Changed the call waiting tone mode (it is now configurable on web page)


Hotfix date 19/01/2017

[WMS-2314] – sys: fixed an issue with attended transfer not working with call group strategy „call all: 32“


Hotfix version 3.82.34180.40 Date 17/01/2017

Improvement

[WMS-2251] – sys: added temperature sensor / SSD life for PBXs

Fixes

[WMS-2317] – sys: fixed an issue with trunk limit due to which in some rare cases it was impossible to make more than 1 call on trunk
[WMS-2254] – sys: fixed wrong missed call notification in case of multiple Dialplan applications „Call group“ starting from WMS v. 3.82.33883.40
[WMS-2270] – col: fixed an issue in which call history / CDR-View did not work if custom port was set in MySQL / MSSQL CDR settings
[WMS-1978] – wms: fixed an issue in which it was impossible to access WMS due to slow connection to CDR MySQL

Firmware

[WMS-2295] – dev: new firmware for WP410 2015 v. 50.145.6.54; WP480(G) 2015 v. 55.145.6.59; WP490(G) 2015 v. 59.145.6.84
what’s new:
WP410, WP480(G), WP490(G):

  • Translations and menu usability improvements
  • Pressing “Colleague” BLF during an active call no longer performs call pickup, but transfer (example: previously when pressing a blinking=“ringing” BLF during a call performed call pickup instead of transfer)
  • CID is now correctly displayed on the phone screen in case phone user calls Feature Codes from Web Phone
  • Fixed processing of REFER in case of calling not existing number
  • BLF statuses are now correctly indicated also for the 2nd and the 3rd page (both the screen, and the BLF lamp itself show the statuses information for the currently selected page)

WP490(G) only:

  • Fixed delay issue during live search

Hotfix date: 28/12/2016

[WMS-2291] – sys: fixed an issue with upgrade from rel340 to rel380 not working on old PBXs due to missing free space


Hotfix version 3.82.33988.40 Date 15/12/2016

[WMS-2271] – sys: fixed an issue in which NAT IP parameter in SIP trunk was not used after PBX reboot
[WMS-2275] – sys: fixed memory leak in DHCP client script

Firmware
[WMS-2274] – dev: new firmware for PRI, W08-24FXS, version 2.0.135.700
what’s new:
– fixed an issue with losing SIP registration after reboot
– fixed an issue with W08-24FXS not being able to handle more than 6 concurrent calls


Hotfix version 3.82.33968.40 Date 13/12/2016

[WMS-2264] – wms: fixed an issue in which it was impossible to enable Chat history and sync option with MySQL server 5.7
[WMS-2214] – sys: performance and stability improvements


Version 3.82.33883.40 Date 05/12/2016

Improvement
[WMS-2237] – sys: added global Dialplan variable HIDE_DTMF=yes used to disable visualization of DTMFs on the display of WP (by default DTMFs are now shown on the display)
List of Dialplan variables: https://manuals.wildix.com/custom-global-dialplan-variables/

Fixes
[WMS-2232] – col: fixed an issue with call interruptions in WebRTC phone after hold in case of big network delays
[WMS-2244] – sys: fixed an issue with missing ringback on W24FXS in some cases

Firmware
[WMS-2238] – dev: new FW version 2.0.135.700 for W0XBRI
What’s new:

  • fixed an issue with losing SIP registration after reboot
  • fixed an issue with W04BRI not being able to handle more than 6 concurrent calls

Version 3.82.33855.40 Date 01/12/2016

Fix

[WMS-2224] – col: fixed an issue with missing call tags in pop-up URL


Version 3.82.33833.40 Date: 27/11/2016

Improvement

[WMS-2223] – wms: added support for T1 PRI ports on Trunks page

Fixes

[WMS-2133] – sys: fixed an issue preventing the system from performing an upgrade due to errors in /var/cache/apt/archives/partial or /etc/cron.d/wms
[WMS-2212] – col: fixed an issue in which ringtone continued playing in case connection to PBX was lost during an incoming call


Version 3.82.33791.40 Date: 24/11/2016

Improvement
[WMS-2111] – sys: auto delete old call recording files on VM / HW PBXs (if space usage is > 95%)

Fixes

[WMS-2096] – col: full time and date details for today’s events are now displayed in call history
[WMS-2201] – sys: disabled SRTP for BRI gateways to allow max number of concurrent calls
[WMS-2139] – wms: temporarily disabled G722 codec support


Version 3.82.33693.40 Date: 18/11/2016

Features

[WMS-1786] – sys: support and enforce number of users in license file
[WMS-2036] – col: use external line prefix for calls from Windows / Mac OS x Integration Utility / Chrome extension
[WMS-2077] sys: new monitoring system for customer PBXs
[WMS-2126] sys: install by default MTR tool on pbxs

Fixes

[WMS-1910] – sys: fixed an issue with some storage devices not being mounted on Cloud PBXs after reboot
[WMS-1989] – col: video calls speed improvement between WebRTCphone (Chrome) and Mobotix doorphone
[WMS-2023] – col: fixed an issue with slow live search in case of large phonebooks
[WMS-2029] – sys: correction of WMS sound “vm-no” in Dutch
[WMS-2049] – wms: fixed an issue in which video sometimes could not not received in Collaboration if g722 support was enabled
[WMS-2058] – col: fixed an issue in which video did not start, in case user called himself / herself from iOS to WebRTC phone unless he/she turned on video on both devices
[WMS-2059] – col: fixed console error occurring in case calls were started immediately with video
[WMS-2066] – col: fixed websocket disconnection issue when enabling video call in case too many networks interfaces are active on PC
[WMS-2072] – sys: fixed call hangup issue during fax sending from W01FXS using SIP trunk VoipVoice
[WMS-2073] – sys: fixed an issue in which assign user and re-provisioning did not work for W02FXS
[WMS-2074] – wms: added more info for logs displayed during a test with SMTP and Fax/SMS Server profile
[WMS-2076] – sys: fixed an issue in which WMS network configuration could be lost in some cases after upgrade


[WMS-2084] – web: fixed an issue with imported phonebook contacts being removed after test import
[WMS-2085] – sys: fixed an issue in which it was impossible to enable external connections to LDAP after WMS v. 3.82.33025.38
[WMS-2089] – col: fixed an issue in which live search menu disappeared when user received a second call
[WMS-2090] – sys: fixed an issue with PBX not processing incoming DNS requests starting from WMS stable 3.82.33420.40
[WMS-2114] – sys: fixed an issue in which Voicemail access in some cases did not work for user with German language due to a missing sound file
[WMS-2117] – col: fixed an issue with some phonebooks not being displayed in Collaboration in some rare cases
[WMS-2121] – sys: fixed an issue in which remote support autostart configuration file had wrong permissions on some PBXs

Firmware

[WMS-2035] – dev: new firmware for W04FXO/W04FXS ver. 5.01g
W04FXS:
– added short ring detection
– added support of custom ringtone patterns


Version 3.82.33420.40 Date: 27/10/2016

New Features

[WMS-1873] – sys: update licence management to support latest Centos / Debian versions
[WMS-1900] – dev: added an option for W-AIR Base “Auto Dect Tree” in “Edit” device (“on” by default)
[WMS-1950] – kit: send chat transcript by email after chat is over

Improvements

[WMS-1780] – sys: added the possibility to use non-standard connection port for WMS Network
[WMS-1940] – col: improved audio chat notifications
notes: audio notifications are now disabled when chat window is open; reduced the number of notifications per minute
[WMS-1972] – col: incoming calls notifications are no longer grouped
[WMS-1976] – col: added video button to video / call dialogs to improve usability
[WMS-2002] – col: attendant console additional improvements
what’s new: increased number of displayed contacts in live search; improved blind transfer from hotkey on some keyboards
Fixes

[WMS-1881] – sys: fixed an issue in which it was impossible to make blind transfer of a call answered with Dialplan application “Mobility extension lookup”
[WMS-1883] – sys: fixed an issue in which second blind transfer using web phone did not not work after first attended transfer of the same call
[WMS-1987] – col: improvement of automatic conversion of symbol combinations into emoticons
[WMS-1889] – sys: fixed an issue with incorrect call group statistics
[WMS-1995] – sys: fixed an issue in which office number was used instead of original caller number during external call forward starting from WMS stable 3.82.33259.40
[WMS-1999] – col: fixed an issue with live search in call dialog displaying only some of available contacts
[WMS-1998] – col: fixed an issue in which live search displayed wrong user’s number in SMS field
(not the number specified in “Mobile” field)
[WMS-2005] – sys: fixed an issue in which provisioning of W-AIR Base SB did not work with firmware v. 3.23 and WMS stable v. 3.82.33259.40
[WMS-2010] – sys: fixed an issue with slow start of ejabberd
[WMS-2011] – wms: fixed an issue with custom DND feature code set to default after upgrade to the last stable v. 3.82.33259.40
[WMS-2015] – sys: corrected a misprint in missed call email notification in Dutch
[WMS-2017] – col: fixed an issue in which user could see his or her own chat in some cases
[WMS-2021] – sys: fixed an issue in which dial tone was interrupted for WP410 after update to WMS v. 3.82.33259.40
[WMS-2022] – wms: fixed an issue with CardDAV sync not working in case of Active Directory sign-on
[WMS-2041] – sys: fixed an issue in which user could not make a call to himself/herself with call waiting disabled starting from WMS stable 3.82.33287.40
[WMS-2052] – sys: fixed an issue in which queue member could receive more than 1 call at a time with call all 32 strategy even if call waiting was disabled


Version 3.82.33287.40 Date: 14/10/2016

[WMS-1994] – sys: increased interval for XMPP Monit check


Version 3.82.33259.40 Date: 11/10/2016

Notes: after the upgrade it is necessary to upgrade FW of WP 2015 and disable call waiting on call group members (for call groups using other call distribution strategies than “call all”); update iOS/Android apps, update WP600AXX

Features

[WMS-1616] – sys: support of paging over RTP multicast and SIP calls
Pre 2010 PBXs receive 6 SIP paging calls + RTP multicast
New PBXes receive 15 SIP paging calls + RTP multicast
Priorities:
1) WP
2) W-AIR
3) Web
4) others
To pickup paging use FC 91

[WMS-1485] – col: support video calls from Collaboration WebRTC to iOS, Androd, WP600A
note: update the applications to the latest version!

[WMS-1720] – col: added “Web CRM” feature which allows opening of a CRM (or another web application) inside Collaboration
code and developer documentation – LINK

[WMS-1736] – col: improved missed events notifications
note: after counter reaches 3 new events (chat / calls), only number of missed events is now displayed; counter is updated each time there is a new missed event

[WMS-1670] – col: added phonebook lookup while adding speed dial buttons

[WMS-1908] – col: added visualization of function keys in Collaboration
Added new tab in Collaboration (visible in case Colleage / Speed Dial / Park orbit feature keys are configured)
– Double click when ringing to pick up a call
– Double click when idle to call

[WMS-1379] – col: added the possibility to change user status (DND / Away / Available) from WP and set up phone features for each status (call forwarding, call waiting, mobility extension, etc) from WP / Collaboration
set up call features for each user status in:
Collaboration Settings > Features
WP > Features menu
change user status via
WP > Features menu
feature code (60 by default)
added new ACL: cannot set Status (DND/Away)

[WMS-1396] – col: users participating in a videoconference are now displayed with DND status “in conference”

[WMS-1605] – col: added support for audio conferences
how-to: when you have two active calls, press “conference” button to put them into conference

[WMS-1653] – col: popup URL improvements – added the option to open external applications and remove first digit from caller number
see popup URL prompt for details

[WMS-1451] – col: Outlook calendar sync via plugin (beta)
requirements: Outlook 2007 or later; Microsoft .NET Framework 3.5 or later
MORE INFO: LINK

[WMS-1327] – col: added support for multi sessions of CDR-View in terminal server installations

[WMS-1829] – col: support printer driver in terminal server
note: Windows Integration Utility got substituted with Fax Printer
limitation: for fax sending make sure Collaboration is running

[WMS-1752] – col: added hot-key dialing from any application
hot key can be set in Collaboration settings > Personal, Dialing hot key
limitation: call from Outlook at the moment is possible only via hot key

[WMS-1774] – col: added possibility to send DTMF from Attendant Console
added “DTMF” quick button and “D” hotkey allowing you to send DTMF during a call

[WMS-1840] – col: support for local time visualization in History and Voicemail

[WMS-1897] – wms: new language selection in WMS: En-us (for the USA)

[WMS-1776] – wms: added ACL rule allowing you to disable pre-answer messages

[WMS-1734] – wms: added option “Incoming CID” from / p-asserted-identity,from

[WMS-1877] – wms: added min / max session timer value to SIP trunk settings

[WMS-1492] – wms: added support for “auto (dns ptr-srv)” transport in SIP trunk advanced settings

[WMS-1060] – wms: enabled sign-on for Active Directory users sync mode in WMS
how-to: WMS Users > Import, select AD and select “sign-on”
notes: feature is also enabled for WP600AXX starting from v. 2.5.44; iOS, Android apps

[WMS-1608] – wms: added default tone zone option to SIP-RTP page (supported by W-AIR, W01/02FXS, WP 2015) and SIP trunks settings

[WMS-1406] – wms: added device status to Devices menu
note: focus the cursor on the status to view the SIP server address and the transport used
known issues: device status of W01FXS old series is not displayed

[WMS-1480] – wms: added Chrome application that opens collaboration as a standalone application (alpha version)
To install: LINK
access: the “Apps” folder from your Google Chrome browser
limitation: impossible to create a Kite Videoconference
Chrome extensions supports click2call feature using tel: wildix: callto: URI for outgoing calls
note: in case Integration Utility is installed, more priority is given to Chrome extension

[WMS-1507] – wms: new Dialplan application “Jump to if user status is” (away / DND)

[WMS-879] – wms: added the option to call simultaneously up to 32 devices / users using “ring all” strategy for call groups (only Atom CPU HW PBX)
now two options are available:
Call All 10: call all available users by groups of 10 people
Call All 32: call up to 32 devices or 32 users (iOS/Android/WP600A/Web devices not supported)

[WMS-1201] – wms: chat history and sync feature
PBX > CDR, Settings, “Chat History and Sync” – feature is by default enabled on new PBXs

[WMS-1814] – wms: translation improvements

[WMS-1931] – sys: Dutch translation support for WP 2015 and email notifications

[WMS-1601] – sys: Dutch sound package

[WMS-1885] – sys: WMS sound package in American English (manual installation is necessary)
Command to install EN-us sound packages:
apt-get install wms-sounds-us-new wms-sounds-us-g729-new wms-sounds-us-tvoice-g729-new wms-sounds-us-tvoice-new

[WMS-1725] – sys: American date format support in Collaboration

[WMS-1618] – sys: American date format on WP 2015 / W-AIR

[WMS-1890] – sys: add possibility of stopping to support VPN
Added the button “Disable” in WMS Settings > Tools and utilities > Remote support
limitations: Kite and Screen sharing do not work

[WMS-1746] – sys: added an option on Devices page allowing you to turn off DST (“Edit” device)

[WMS-1678] – sys: support of BLF monitoring options
Added options to Collaboration Settings -> Function keys (for Colleague, Call group, Speed Dial, Park Orbit):
– View calls icon (eye): see who is calling (“on” by default, if ACL “can view calls of users” allows it)
– Audio notification icon (sound): audio notification when there is an incoming call (“off” by default)
– Direct transfer icon (arrow): press during a call to perform a blind transfer (off by default)

[WMS-1445] – sys: support 3 pages of BLF keys on WP480G (allowing up to 17 BLF keys) and VM key (long press “1”)
note: use right and left Navigation keys to move between the pages

[WMS-1231] – sys: added support for setting user status from WP features menu and via feature code

[WMS-1671] – sys: implemented call parking feature
how-to: add a new user of type “Park orbit”; this extension can be used to park calls
note: “Call waiting” and “Dial Timeout” user preferences can be set for user type “Park orbit”: “Call waiting” allows to park more than one call; “Dial timeout” – return from parking after the specified timeout

[WMS-808] – sys: support video calls from Kite user to iOS, Android, WP600A, WP600ACG user

[WMS-1676] – sys: support for return of conf calls to conference owner

[WMS-1660] – sys: support storage devices over QEMU virtualized systems

[WMS-1677] – sys: added the option /rw2/etc/provision.conf[wildixp2] POWER_LED=no allowing you to turn off by default the power LED of WP 2015

[WMS-1633] – sys: added call waiting tone parameter for WP Phones 2015 and Collaboration
how-to: WMS Users > Edit preferences > Settings section – Call waiting tone (enable / disable)

[WMS-1509] – sys: forward notification is now shown on phones only in case “force call forward” is enabled, on W-AIR handsets also the destination number is indicated

[WMS-1352] – sys: added the possibility to see remote party caller ID when monitoring call groups via function key “Call group” on WP480 / WP490 2015

[WMS-1314] – sys: added beep to silent ringtone
note: Web phone – in case of a second incoming call, after hang up of the first call, beep is played; WP4X0 – beep is played in case DND is enabled with “silent ring”

[WMS-1321] – sys: audio re-invites from FXS ATAs are now always sent to the other side after failed T.38 re-invites (already released to stable)

[WMS-1411] – sys: added notification in case history service is not available

[WMS-1713] – sys: support of firewall bypass for web phone

[WMS-1535] – dev: support of HTTPS provisioning for W-AIR

[WMS-1737] – api: VTiger integration via Collaboration web app (beta)
Info for developer: LINK

[WMS-1599] – api: added information about connected call in WebAPI
developers documentation updated: LINK

[WMS-1450] – api: added method to retrieve the call recording file getrecfilename
documentation: LINK

Improvements

[WMS-1809] – col: improved WebRTC phone mute functionality and added auto hide / show on mouse over

[WMS-1740] – col: audio call now starts when user presses video call button without an existing audio call

[WMS-1792] – col: device selection is now supported when Collaboration is open inside an iframe

[WMS-1794] – col: line numbers are now shown for active calls in Attendant Console

[WMS-1955] – col: Attendant Console improvements (search and blind transfer improvements)

[WMS-1733] – col: recording is now started without sending DTMFs to remote side

[WMS-1525] – col: improved “Edit colleagues” window design

[WMS-1582] – col: user status “online” renamed to “available”

[WMS-1514] – col: Dutch translation improvements

[WMS-1374] – col: click on selected element during transfer now performs attended transfer, not the blind one

[WMS-1442] – col: added “Save” button in Web Phone settings to confirm the choice of audio devices

[WMS-1797] – col: improved emoji emoticons quality and download optimization

[WMS-1919] – col: screen sharing switched from HTTP to HTTPS

[WMS-1946] – wms: ACL group default no longer blocks access to event history

[WMS-1755] – wms: minor improvements for Devices page
– show immediately Semi-automatic mode if the PBX is Cloud
– reduce “Mac Address” column to “Mac” in Automatic mode

[WMS-1870] – sys: added option to enable announcement of date / time / caller phone number for Voicemail messages (General Dialplan settings)

[WMS-1753] – wms: user on remote PBX can now record file from sounds menu

[WMS-1772] – wms: welcome message emails are now sent with HTTPS links

[WMS-1747] – wms: improved validation for Call timeout and Mobility timeout fields in users preferences
Note: added validation for Call timeout and Mobility timeout fields; Call timeout max value increased to 600 sec

[WMS-1715] – wms: option “show original caller number” in SIP trunk settings is now disabled by default if Country is set to Italy in Dialplan General Settings

[WMS-1654] – wms: added icons for WP4XX 2015 to Users menu

[WMS-1664] – wms: added the possibility to limit access to some menus of WMS interface for WMS admins in ACL configuration
note: now it’s possible to limit access to the menus “Hotel integration”, “Generate trace” and “Remote support” in Users > Groups, “Edit admin permissions” (available only for “admin” user)

[WMS-1500] – wms: added selection of more country codes in SIP / FXO / ISDN trunks, Dialplan General Settings

[WMS-1478] – wms: existing fax / room users are no longer removed in case not received from the backend during the import
note: the feature works if the option “Remove existing users which are not received from the backend” is enabled but “Type” field is not activated

[WMS-1432] – wms: added missing impedance setting for FXO

[WMS-1842] – wms: added new parameter to enable / disable DC impedance in FXO trunk settings

[WMS-1773] – wms: added PRI trunk configuration parameter Line Framing: Sf/Esf/Crc4/NoCrc4

[WMS-1930] – wms: hide Networking, DHCP server settings in chroot environment
list of services and ports used – LINK

[WMS-975] – sys: improvements and optimizations for sounds packages

[WMS-1802] – sys: increased memory on pbx.wildix.com system

[WMS-1970] – sys: improved memory usage for low memory PBXs

[WMS-1848] – sys: auto delete old call record files on Cloud PBX to avoid no free space issue in rootfs

[WMS-1748] – sys: improved call class detection for Austrian numbers

[WMS-1668] – sys: CDR record is no longer saved in case of failed pickup

[WMS-1738] – sys: use STUN requests for RTP learning
this change allows speeding up startup of video from WP600ACG to doorphone camera

[WMS-1694] – sys: increased conference max users limit to 60

[WMS-1696] – sys: visual improvements of call dialogs

[WMS-1547] – sys: improved logic of call distribution strategy for queues which do not use “call all” strategy
incoming calls are now distributed to available call agents, without waiting for the previous call to be answered
note: to apply this change it is necessary to disable call waiting for call group members

[WMS-1903] – sys: send call to next queue member when reached timeout using call group strategies “longest idle” or “fewest calls”

[WMS-1655] – sys: added support for DST (Daylight saving time) for US / Canada

[WMS-1389] – sys: fixed an issue with missing ringback during forward of external call to SIP trunk with some VoIP operators

[WMS-1441] – sys: changed logics of recording file names making them harder to guess

[WMS-1592] – sys: “user busy” is now played back instead of “user has rejected the call”

[WMS-1942] – sys: support pick up via replaces
note: this improves pick up management on 3rd party phones allowing to pick up a particular call

[WMS-1630] – api: improved predictive dialer: users in status “paused” are now considered as not available

[WMS-1634] – api: added numerical ordering of hotel rooms in WebAPI demo

[WMS-1498] – api: updated WebAPI library on PBXs to the latest version

[WMS-1667] – dev: improved W04FXO impedance settings to avoid noise during line connection

[WMS-1837] – dev: automatic reboot of W04FXO after change of impedance in FXO trunk settings

Fixes

[WMS-1647] – sys: fixed an issue in which CDR SQLite DB could not be activated in case of problems with the existing file
[WMS-1739] – col: fixed an issue with umlauts not being displayed correctly in call history with MySQL CDR
[WMS-1929] – col: fixed an issue with CDR-View filter “Previous week” displaying also the first day of the current week
[WMS-1849] – col: fixed an issue in which “show contact” from live search did not work
[WMS-1751] – sys: fixed an issue in which faxes with BRI / PRI did not work in some cases when SRTP was active
[WMS-1816] – col: fixed no audio issue after attended transfer with Web Phone and VoIP trunk in some cases
[WMS-1973] – col: fixed an issue in which audio was switched from selected device to default device after video activation in Web Phone
[WMS-1636] – col: fixed an issue where missed call and missed call notification were assigned to a wrong user if the 1st call group agent rejected the call
[WMS-1766] – col: fixed an issue in which transfer of two ongoing calls was not possible while receiving an incoming call
[WMS-1767] – col: fixed an issue with Collaboration returning an error each time user set a tag for active call
[WMS-1596] – col: fixed an issue in which user from Client PBX did not receive invitation for chat conference started from Server PBX
[WMS-1721] – col: fixed an issue creating high load on CPU using Chrome due to animation in presence status icon
[WMS-1651] – col: fixed an issue in which some calls were not visible in History menu due to wrong call class detection
[WMS-1871] – col: chat transfer must not allow attended transfer
[WMS-1632] – col: fixed an issue where in case of long chat history it was impossible to receive new messages and view chat history using Firefox
[WMS-1648] – col: fixed an issue where the flag “Erase existing value if empty value is received” in Phonebooks Import using certain backends was applied to all the fields of the Map section and not only to the selected ones, causing the loss of some contact information after Phonebook sync
[WMS-1593] – col: improved map view of colleagues
note: colleagues locations are now fitted the the map view; map is now focused on Europe only in case there are no colleagues available on other continents
[WMS-1437] – col: fixed an issue in which presence information of some users could be wrong after PBX reboot or after PC waking from sleep mode, unless the page was reloaded
[WMS-1527] – col: fixed an issue in which call recording files from remote PBXs could not be downloaded via CDR-View
[WMS-1545] – col: fixed an issue in which choice for audio device was not available in case of call via “Any” device to phone number starting with “+”
[WMS-1847] – col: fixed an issue in which it was impossible to answer the call in Collaboration when “any device” was selected and the list of devices was closed
[WMS-1401] – col: SIP trunk name is now shown correctly in CDR-View even in cases the value is different from “Auth Login” in SIP trunk settings
[WMS-1452] – col: external calls made via Mobility feature are now displayed in personal call history
[WMS-1463] – col: fixed an issue with wrong callee and caller in history in case of call from Mobile APP via GSM
[WMS-1511] – col: fixed an issue with wrong “To” number in CDR for incoming fax calls using W01FXS
[WMS-1528] – col: fixed wrong order of users in Collaboration in case using “Department” field
[WMS-1912] – col: fixed an issue in which after user changed ACL group, other users in group could no longer see colleagues in Collaboration
[WMS-1491] – col: fixed duplicate records for some calls in CDR-View
[WMS-1466] – col: import of more than 500 contacts from office365 is now possible
[WMS-1925] – col: fixed an issue in which bottom icons in chat were not visible after reducing browser window size
[WMS-1808] – sys: fixed an issue with import from Active Directory: it is now possible to enter base DN in uppercase
[WMS-1822] – sys: fixed bad audio quality during calls between W01FXS/W24FXS new series and WP410 in some cases
[WMS-1934] – sys: rotate audio recording, voice mail, fax, backups to avoid lack of space on disk
[WMS-1743] – sys: fixed an issue with backup procedure returning error in some cases
[WMS-1762] – sys: fixed an issue in which Kite did not work in some cases for Cloud PBXs
[WMS-1763] – sys: fixed an issue in which transfer button in call dialog window was unavailable after call transfer to trunk
[WMS-1768] – sys: fixed one way audio issue after semi-attended transfer for calls over WMS network
[WMS-1714] – sys: one way audio after semi-attended transfer with some voip operators in case of change of SSRC
[WMS-1730] – sys: fixed an issue with one way audio from Web phone to WP old series
[WMS-1744] – sys: fixed an issue in which PBXs location could not be updated
[WMS-1750] – sys: fixed an issue with ringback tone playback on W04FXS
[WMS-1702] – sys: fixed an issue in which WMS upgrade could fail due to missing archive directory
[WMS-1526] – sys: fixed an issue where in some cases mobility calls were not shown in Collaboration
[WMS-1635] – sys: fixed an issue with user status and status message set to default after restart of iOS/Android app
[WMS-1591] – sys: W-AIR now uses the timezone set on Devices page
[WMS-1645] – sys: fixed an issue in which recovery did not work if local DNS resolver was not working
[WMS-1644] – sys: fixed an issue where in some cases after system recovery system required an input from console in order to boot
[WMS-1600] – sys: added PHP support for PostgreSQL in Wildix platform
[WMS-1549] – sys: fixed an issue in which second blind transfer did not work in some cases
[WMS-1464] – sys: improved procedure of backup generation on PBX
in case backup file generated on the PBX contains empty or wrong values, notification is shown, an email is sent to the sysadmin and warning is written to the syslog
[WMS-1546] – sys: fixed an issue in which incoming fax to FXS did not work using “fax detect” with direct RTP enabled
[WMS-1530] – sys: fixed an issue in which it was impossible to change status of some feature codes after upgrade to the last stable release 3.81.31808
[WMS-1503] – sys: fixed an issue in which after disabling video on iOS/Android/WP600A/ACG, video did not stop on remote side
[WMS-1506] – sys: fixed an issue in which fax sending did not work in some cases using Mail2Fax
[WMS-1532] – sys: fixed an issue in which call could not be answered after expiring Mobility timeout, in case SIP trunk for Mobility used TCP or TLS transport
[WMS-1186] – sys: fixed an issue in which user who refreshed Collaboration page could not see details of ongoing calls of remote users
[WMS-1246] – sys: fixed an issue in which Storage page was not available for VM PBXs
[WMS-1520] – sys: Dial button when selecting a Contact name in Phonebook menu of WP4XX 2015 now works correctly
[WMS-1429] – sys: improved LDAP recovery during recovery procedure
[WMS-1446] – sys: fixed an issue in which WMS upgrade did not work in some cases for virtual PBXs in chroot environment
[WMS-1456] – sys: fixed no audio issues which could occur after changing time and date settings on the PBX
[WMS-1943] – sys: fixed silent ringtone issue in some cases when received 2 consecutive calls
[WMS-1151] – sys: fixed an issue causing call drop after 40 minutes if NAT_IP parameter was enabled in SIP trunk settings
[WMS-1944] – sys: fixed an issue in which automatic phonebook sync was performed even if no scheduled synchronization was configured
[WMS-1791] – wms: fixed an issue with ban period not shown correctly
[WMS-1708] – wms: fixed an issue which impossibility to open main Dialplan after applying a backup file
[WMS-1904] – wms: fixed an issue with search filter in Dialplan menu not working after saving Dialplan configuration
[WMS-1700] – wms: fixed an issue in which existing contacts could be deleted and re-created after new import in some cases
[WMS-1756] – wms: fixed an issue with MySQL / MSSQL turning off automatically if server was not available during upgrade
[WMS-1757] – wms: minor usability and graphical fixes
[WMS-1765] – wms: fixed an issue with Voicemails being present if “incoming” filter was selected in History
[WMS-1688] – wms: fixed an issue in which number normalization for incoming calls was not performed after Dialplan application “Mobility extension lookup”
[WMS-1484] – wms: fixed an issue with wrong visualization of device registration in Users menu in some cases
[WMS-1604] – wms: fixed an issue in which upgrade procedure could fail in some cases
[WMS-1575] – wms: fixed an issue with impossibility to access CDR-View on Windows if appdata folder is installed on a remote server
[WMS-1613] – wms: added correct call class detection for French mobile numbers starting with 7
[WMS-1542] – wms: fixed an issue with sound file upload not working in case the folder name contained space character
[WMS-1570] – wms: improved error notification in case file attached for fax sending is in wrong size (non A4 *.tiff or *.pdf)
[WMS-1534] – wms: fixed incorrect size of WebRTC video window after resizing call dialog window
[WMS-1910] – sys: fixed an issue with storages not mounting automatically on Cloud PBXs after reboot
[WMS-1513] – wms: fixed a duplicate contacts error which occurred after importing a CSV file generated on PBX with old WMS version
[WMS-1521] – wms: fixed an issue in which “Dial the phone” Dialpan application automatically set Called number to “default”
[WMS-1933] – wms: fixed wrong visualization of Dialplan application “Fax to email” after applying backup from rel340
[WMS-1461] – wms: fixed incorrect size of port blocks window on Trunks page
[WMS-1615] – dev: fixed wrong missed call notification in case of multiple applications like “Dial the phone” or “Callgroup” in Dialplan
[WMS-1683] – dev: fixed wrong visualization of device registration in Users menu of Client PBX using UCARP-based failover
[WMS-1649] – dev: fixed an issue in which after changing the Server W-AIR Base station in W-AIR network user / slot allocation was lost and it was necessary to re-login W-AIR handsets
[WMS-1598] – dev: fixed no audio issue reproducing in some cases after call transfer with W04FXO
[WMS-1550] – dev: fixed an issue in which WP 2015 could in some cases display wrong contacts in XML phonebook
[WMS-1540] – dev: fixed wrong missed call notification on WP 2015
[WMS-1467] – dev: fixed an issue in which device received VLAN settings even if no VLAN settings have been entered for this device on Devices page

[WMS-1468] – api: fixed duplicated contacts using import from Outlook
[WMS-1516] – api: fixed an issue in which mass alarm calls did not work in some cases using WebAPI Hotel Manager
[WMS-1465] – api: fixed an issue in which numbers containing special symbols (e.g. brackets or spaces) could not be correctly recognized using tel: sip: wildix: uri with Integration Utility on Windows
[WMS-1475] – api: fixed an issue in which attended transfer via WebAPI did not work using Safari
[WMS-1523] – kit: fixed an issue in which screen sharing button was hidden during call for Cloud PBXs

Firmware

W-AIR and W-AIR SB bases, ver. 03.55.00.21

– PTT (push to talk) feature for W-AIR 100 / W-AIR 150
enable: Settings > PTT – “On”
how-to: press and hold the Mute button: say your message
limitation: PTT does not work over Repeater

– Support for Internal / External / Whitelist / Blacklist ring tones selection on the handset and silent ring for DND

– Support for multi DECT registration on W-AIR 100 / W-AIR 150

– Fixed no audio issue after attended transfer

– Umlauts (ä,ö,ü) and letters with accent (à, è, ò, é) are now shown correctly on display

WP410, v. 50.145.6.45

– added 2 function keys and 2 BLF pages (WP410 Sept 2016)
– missed calls sync with the PBX
– added Live search feature when entering a number (results are displayed below)
– destination number for forced call forward is now indicated
– added an option allowing you to select Ringtone Output in Menu > Audio > Option (Handsfree\Headset)
– network initialization is no longer started in case of no network change was done (example: change in BLF – configuration no longer restarts Network settings)
– fixed provisioning procedure via Portal (auto.wildixin.com)
– fixed: phones continue to use old IP address after receiving NACK from DHCP
– fixed: pressing BLF key during a call performs pickup instead of transfer
– fixed an issue with phone sending “200OK” with only one codec if WP configured in REMOTE priority
– fixed an issue with phone freezing in some cases
– fixed an issue which could prevent the phone in some cases from playing any sounds (ringtone, audio, etc)
– fixed an issue in which under certain circumstances, ringtone volume could go back to default

WP480/WP480G, v. 55.145.6.49

– support of 3 pages of BLF keys (up to 17) and VM button
– missed calls sync with the PBX
– 802.3az Energy Efficient Ethernet
– added live search (search results are displayed below)
– user ID after call transfer is now displayed on BLF
– added “Away” user status icon
– added an option allowing you to select Ringtone Output in Menu > Audio > Option (Handsfree\Headset)
– destination number for forced call forward is now indicated
– support of “space” symbol in XML browser request (e.g. when searching for a contact)
– fixed delay issue when adjusting volume
– fixed: pressing BLF key during a call performs pickup instead of transfer
– fixed: phones continue to use old IP address after receiving NACK from DHCP
– fixed an issue in which phone was endlessly playing beeps after fast answer or reject using audio BLF
– fixed an issue where in case wideband codec was used, phone replied with “200OK” message containing only one codec
– fixed DNS failover issue

WP490/WP490G, v. 59.145.6.62

– added the 2nd page of BLF keys allowing you to see the labels of 10 BLFs situated on the right panel (paper labels are no longer needed, now you can see the labels on the phone’s screen; note that you must use buttons 9-18 on the right panel for LEDs and for control; press Right and Left Navigation Keys to switch between the pages)
– missed calls sync with the PBX
– 802.3az Energy Efficient Ethernet
– added live search (search results are displayed below)
– user ID after call transfer is now displayed on BLF
– added “Away” user status icon
– destination number for forced call forward is now indicated
– support of “space” symbol in XML browser request (e.g. when searching for a contact)
– network initialization is no longer started in case of no network change was done (example: change in BLF configuration no longer restarts Network settings)
– fixed an issue in which phone was endlessly playing beeps after fast answer or reject using audio BLF
– fixed: pressing BLF key during a call performs pickup instead of transfer
– fixed an issue where in case wideband codec was used, phone replied with “200OK” message containing only one codec
– fixed DNS failover issue
– fixed an issue where phones could continue to use old IP address after receiving a new one from DHCP
– fixed ringback noise issue in case 180 with SDP
– fixed lost registration issue

W04FXO/w04FXS ver. 5.01e

– fixed a rare noise issue in case of incoming call from PSTN line to FXO
W24FXS 2015 ver. 27.18.01.10

– fixed an issue in which caller name wasn’t displayed in case number started with “+”
– reduced ring call duration for “internal” class
BRI, PRI and FXS (pre 2013), v. 2.0.135.676

– support for SRTP


Version 3.81.33108.18 Date: 29/09/2016

[WMS-1724] – sys: added support for W-AIR Base Station Outdoor


Hotfix version 3.81.32696 Date 01/08/2016

[WMS-1246] – sys: fixed an issue with missing Storage page for VM PBXs


Hotfix version 3.81.32689.18 Date 29/07/2016

[WMS-1762] – sys: fixed an issue in which Kite did not work in some cases for Cloud pbxs
[WMS-1632] – col: fixed an issue preventing user from receiving new messages and viewing chat history using Firefox


Hotfix version 3.81.32184.18 Date 21/06/2016

[WMS-1624] – dev: added support for W-AIR base stations with Mac Addresses range 9C7514347XXX
[WMS-1625] – sys: fixed an issue with WMS upgrade being sometimes interrupted because of filesystem errors


Hotfix version 3.81.32117.18 Date 10/06/2016
[WMS-1578] – wms: fixed an issue in which contacts could not be deleted from certain phonebooks via Collaboration in some cases (ref: 2016060610000181)
[WMS-1448] – sys: fixed one way audio issue after attended transfer to WP 2015 in WMS network (ref: 2016042810000053)


Hotfix version 3.81.32019.18 Date: 01/06/2016
Improvement
[WMS-1500] – wms: added selection of more country codes in SIP / FXO / ISDN trunks, Dialplan General Settings

Fix
[WMS-1540] – dev: fixed wrong missed call notification on WP 2015


Hotfix version 3.81.31891.18 Date: 18/05/2016

[WMS-1497] – sys: fixed an issue with W01FXS losing login during „Configure/Sync device“ procedure after upgrade to v. 3.81.31808

[WMS-1490] – sys: fixed an issue where in some cases after user password was changed to a new one, this change was not applied

[WMS-1321] – sys: audio re-invites from FXS ATAs are now always sent to the other side after failed T.38 re-invites

[WMS-1459] – sys: fixed an issue where in some cases users received wrong Voicemail notification

[WMS-1512] – wms: fixed an issue with dnsmasq failure after applying old backup


Version 3.81.31808 Date: 12/05/2016

New features

[WMS-659] – wms: added notification in WMS in case ports needed for remote trunks / phones are not open
note: the first icon on the left in the top right menu: “Port blocks”

[WMS-1285] – wms: added import / export of Dialplan
after the export, it’s necessary to check all the references in Dialplan rules (on phonebooks, call groups, Included Procedures, etc), as they might be empty or missing

[WMS-1195] – wms: added new ACL: cannot use Voicemail

[WMS-627] – wms: support ACL destination call class type for France, Germany, Austria, Switzerland, the Netherlands, Belgium, Spain, Portugal, UK
remember that Country Code indicated in General Dialplan Settings is used for call class detection, and country code in the trunk settings is used for number normalization
New guide: https://manuals.wildix.com/acl-and-call-classes/

[WMS-1076] – wms: added ordering of call group members
how-to: select one or multiple users in a call group and use arrows Up & Down

[WMS-1312] – wms: added impedance setting for fxo gateways
WMS Trunks > FXO > Edit trunk

[WMS-1299] – wms: added back “registration proxy” support in SIP trunk settings
if this field is filled in, it is used as destination to send registrations; “outbound proxy” is not used then

[WMS-1213] – col: call dialogs usability improvements
note: active calls are now displayed in the right part of the screen; to hide the call dialog, click on the “handset” icon in the call dialog

[WMS-1237] – col: visual improvements for Function keys menu

[WMS-1196] – col: added support for attendant transfer in Attendant Console and support for up to 20 lines

[WMS-1289] – col: added speech recognition for chat message and live search
how-to: press the microphone icon (live search or chat) and speak

[WMS-736] – col: added indication of who is calling a colleague whose status is monitored via BLF key

[WMS-1139] – col: added tag visualization in web pop-ups, option to open automatically pop-ups after answer / ring
Configure in: Collaboration Settings > Personal (below Popup URL)

[WMS-1021] – col: design improvements for video conference on WP600ACG and Android devices

[WMS-1275] – col: support redial last called number via headset integration on supported headsets
Documentation: Headsets Compatibility Matrix

[WMS-1199] – col: added support for multiple call handling and hold / resume via handsets
how-to:

  • press and hold the Answer/end button (2 secs) to put a current call on hold and answer an incoming call
  • press and hold the Answer/end button (2 secs) to switch between held call and active call
  • double-tap the answer/end button to reject an incoming call when on hold
  • tap the answer/end button to end current call and answer incoming call

[WMS-1091] – col: Chrome extension click2call feature
how-to: select a phone number and right-click -> select “Call” (“W” icon); support for URI tel: / sip: / wildix:

[WMS-1305] – col: added the right-click action on a contact (Phonebook menu) to show Notes
notes can be added to a Contact during a call

[WMS-1386] – col: added link to fax transmission report in History

[WMS-1291] – col: added support for Shared Voicemail in Collaboration
Note: Users who are subscribed to another user’s Voicemail can now receive notifications to Collaboration and listen to new Voicemails (Voicemail menu)
How-to: Shared Voicemail is set in WMS Users > Edit preferences, “Settings” – tick off the checkbox and enter the extension number of user to subscribe to

[WMS-1114] – col: added PBX selection to CDR-View filter and the option to match a pattern

Match a pattern example:
to match all the numbers starting with 55 or starting with +38, add into “Direction” filter, patterns 55% or +38%
to match all the numbers which end with 55, add %55
to match all the numbers containing 55, add %55%
Updated guide: https://manuals.wildix.com/cdr-view-user-guide/

[WMS-939] – sys: added support for internal CDR storage on WGW90 and bigger PBXs
note: added notification that MySQL / MSSQL is required if the PBX is under high load

[WMS-1124] – sys: added support for return from semi-attended transfer
example: user A is in conversation with user B; User A calls user C and transfers the call before user C answers; in case user C busy / rejected the call / not answering, return from transfer is now supported on WP phones

[WMS-1232] – sys: added feature key shortcut to enable / disable forward
how-to: add a feature key “Speed dial” and enter: [feature_code]3[forward_number]
e.g.: 613100 – enables/disables busy call forwarding (depending on current status) to number 100
notes:
supports “busy call forward”, “unavailable call forwrad”, “force call forward” (61, 62 and 63 by default)
supports setting of call class, example: 6131001 – where “1” is “external” call class

[WMS-1409] – dev: TLS support for W-AIR

[WMS-1206] – dev: TLS support on W04FXS / W04FXO

[WMS-1210] – dev: added support for WP480G

[WMS-1209] – dev: added support for W02FXS

[WMS-1249] – dev: now call group name is displayed on BLF key of WP4X0 2015 instead of ID number

[WMS-1160] – dev: line keys and phonebook / history management improvements for WP 2015

  • unused keys are now displayed as “empty” instead of line keys
  • increased phonebook access speed

[WMS-1277] – api: added ordering of groups inside hotel demo app

[WMS-1198] – api: add get kite info and get name to webapi

[WMS-1221] – api: add getdestinationchannel method to webapi
Developer documentation: https://www.wildix.com/webapi/doc/

[WMS-1133] – api: extended “Originate” PBX Control API to allow all scenarios

[WMS-991] – conf: added scheduling of WebRTC Kite video conferences
Note: available during the invitation of participants

Improvements
[WMS-1383] – wms: added hotline timeout parameter in user preferences

[WMS-1280] – wms: visual improvements for Sounds menu

[WMS-891] – wms: refactoring and redesign the Backup system page

[WMS-1357] – wms: default tone setting (WMS Devices > Edit) is now possible also for W01/02/24FXS

[WMS-1172] – wms: users are now ordered by name in Hotel manager WebAPI

[WMS-1113] – wms: fax report now contains the correct source number and fax header

[WMS-1264] – wms: added PBX domain name as URL to PBX in welcome message sent to new user

[WMS-1423] – col: added an option to start chat from History menu of Collaboration

[WMS-1340] – col: fixed an issue in which access to CDR-View / Screen sharing could be blocked by web proxy
note: no need to add exceptions for wildixintegration.eu domain in web proxy settings

[WMS-1152] – col: added support for Jabra EVOLVE in Headset integration component

[WMS-1169] – col: Web phone works now on Chrome OS and Android

[WMS-1101] – col: users with FXS phone connected are now displayed with blue color status

[WMS-1188] – col: added back the button to export report in Excel in CDR-View

[WMS-1272] – col: recordings / fax files are now shown in CDR-View

[WMS-1421] – col: fixed an issue when in some cases it was impossible to attach a fax PDF file in A4 horizontal (landscape) orientation

[WMS-1134] – col: improved password form usability, minimal password length is reduced to Google standards
Passwords can contain any combination of ASCII characters and must contain a minimum of 8 characters.

[WMS-1391] – sys: the minimal length of the PIN code for access to Kite videoconference using feature code (98) is now limited to 7 digits

[WMS-1329] – sys: blocked processing fax from email in case the sender and receiver is the same
note: do not use in Fax Settings email of user who must send faxes

[WMS-1197] – sys: automatic call back is now correctly processed even when using different ports of PSTN trunks

[WMS-1253] – sys: Mobility timeout is now set to min 10 seconds in case user has an iOS/Android client connected

[WMS-945] – sys: Voicemail voice menu improvements
playback of number and time is now optional (available after the message playback)

[WMS-1180] – sys: added support for quoted-printable encoding using mail2fax / mail2sms
How to use Mail2Fax/Mail2SMS: https://manuals.wildix.com/fax-server-quick-guide/

[WMS-1217] – sys: annexb=no is now added in “OK” replies for compatibility with SIP devices which do not add it

[WMS-1308] – sys: improvements for WP 2015 XML browser usability
Important: the four soft keys have changed their position in History and Phonebook menu and now they have the same position as in Dial window

[WMS-1371] – sys: added ucarp redundancy script on PBXs
Path to the file – /usr/sbin/failover_enable.sh

[WMS-1236] – dev: support of visual / audio BLF for WP490G / WP480 / WP490 2015
how-to: Collaboration Settings > Function keys:
“Colleague call”: see who is calling monitored user and pickup a ringing call
“Colleague call with audio”: receive an audio notification in addition and pickup a ringing call

[WMS-1168] – api: added option for HTTPS connection using WebAPI

[WMS-1394] – api: added reason cause for “call_terminated” events in WebAPI
New methods were added to WTAPI.TelephonyPlugin.Call; Developer documentation online

[WMS-1257] – api: added support of Any and Mobility device via WebAPI

[WMS-1130] – api: added support “Device” Login / Logout PBX Control API for WP4X0 2015

Fixes
[WMS-1354] – wms: fixed an issue in which GSM, FXO, BRI, PRI trunks were still displayed on Trunks page and in Dialplan after deleting the media gateways from Devices page
Note: now empty values are displayed
[WMS-1271] – wms: changed default base ports settings for ISDN gateways to avoid random one way audio issues
[WMS-1384] – wms: fixed wrong order of backups by creation date in Firefox browser
[WMS-1410] – wms: fixed an issue in which DNS stopped working on PBX in some cases after WMS network restart
[WMS-1241] – wms: missed call is no longer shown on WP in case of call forwarding
[WMS-1347] – wms: fixed an issue where CDR Sqlite backend couldn’t be activated after WMS reset
[WMS-1256] – wms: fixed an issue in which phonebook sync did not work correctly due to wrong setting of source_id field
note: now if the field “ID” wasn’t previously set, same value as in “name” will be used
[WMS-1144] – wms: fixed an issue where Abruzzo was displayed as default region for Italy in phonebook
note: now empty field is selected by default
[WMS-1290] – wms: contacts with the same names are now correctly imported via CardDAV
[WMS-1286] – wms: fixed incorrect indication of firmware version during semi-automatic provisioning
[WMS-1293] – wms: refresh of page is no longer needed to be able to select a “music on hold” file added to an empty directory
[WMS-1185] – wms: special characters are no longer allowed in host name
allowed symbols: lower case letters, digits and hyphen
[WMS-1192] – wms: fixed an issue when in some rare cases when connecting Client to Server, WMS Network page showed infinite loading
[WMS-1268] – wms: fixed an issue with missing call pop-up after disconnecting a PBX from WMS network
[WMS-1281] – wms: fixed an issue with headset integration on MAC using Plantronics CS60
[WMS-1190] – wms: fixed an issue where iOS app login failed because of incorrect configuration in on the Dialplan General Settings page (starting from v. 3.80.31019)
[WMS-1164] – wms: fixed an issue with trace generation failure in case backup partition was mounted on Windows share
[WMS-1093] – col: fixed errors in History and CDR-view in matching destination of a call
[WMS-530] – col: fixed an issue in which mobility calls were not shown in History tab in some cases
[WMS-1356] – col: fixed an issue in which new history entries were not automatically shown after a day
[WMS-1407] – col: fixed wrong caller number format in Collaboration in case of incoming call from trunk
note: original number was displayed, without normalization
[WMS-1194] – col: fixed an issue preventing a user to set tag in History menu of Collaboration
[WMS-1095] – col: special symbols are now shown correctly in XML browser of WP480 / WP490 2015 and in Collaboration history
To apply this fix, press “Save” on the WMS PBX > CDR > CDR settings
[WMS-1137] – col: tag names are now shown correctly in graphs in CDR-view
[WMS-1380] – col: fixed an issue when in some cases CDR-View could not be accessed if Gmail phonebooks were used
[WMS-1366] – col: user initials (used in case user picture is not set) now change once user name is changed
[WMS-1428] – col: fixed an issue when in some cases “mailto” link in Collaboration did not work using Chrome browser on Mac OS X
[WMS-1224] – col: fixed an issue in which counter of new chat messages was resetting after new incoming file
[WMS-1413] – col: fixed an issue where in some cases noise appeared during an active Web phone call when receiving a file
[WMS-1263] – col: fixed error beep in Collaboration in case call has been completed elsewhere
[WMS-1415] – col: fixed an issue in which answer of a second call from the same caller number caused a hangup of the first call
[WMS-1302] – col: fixed audio interruption during calls using webrtc phone
[WMS-1320] – col: fixed an issue in which it was impossible to resume a call on hold after hanging up an incoming call using headset
[WMS-1295] – col: Jabra headset integration minor improvements
[WMS-1175] – col: fixed an issue where screen sharing could not be started on Windows PC via RDP because of missing admin permissions
[WMS-1124] – sys: added support for return from attended transfers when destination does not answer
[WMS-1359] – sys: fixed an issue with missing ringback during semi-attended transfer using TAPI
[WMS-1422] – sys: fixed an issue with slow Dialplan execution when using large phonebooks (>50k contacts) on old PBXs
[WMS-1353] – sys: fixed an issue in which Caller number was set to “Mobility” instead of “Office” when calling from iOS / Android App via GSM
[WMS-1358] – sys: number normalization for Mobility calls is now performed correctly
[WMS-1367] – sys: fixed an issue in which call recording was interrupted after attended transfer from W-AIR
[WMS-1405] – sys: fixed an issue in which call could drop due to insufficient RTP ports range defined on SIP-RTP page
note: it’s no longer possible to save RTP-SIP settings in case the defined port range is not sufficient for your PBX model
[WMS-1372] – sys: increased pre-answer timeout when calling user with DND status
[WMS-1378] – sys: fixed an issue when in some cases user couldn’t make more than 1 simultaneous call
[WMS-1322] – sys: fixed an issue with one way audio after 3 minutes in a conference call with remote users
[WMS-1334] – sys: fax copy is now saved even in case of unsuccessful fax sending
[WMS-1066] – sys: fixed an issue in which playback after fax detection failed in case g729 was selected as a preferred codec in an incoming invite
[WMS-1306] – sys: fixed an issue where in some cases call files could not be deleted causing issues with tmp memory
[WMS-1309] – sys: provisioning of W24FXS 2015 now works also with domain name
[WMS-1240] – sys: fixed an issue with missing ringback in case of call from WP600A/ACG to colleague whose status was away with mobility feature enabled
[WMS-1266] – sys: normal ringtone is now used instead of silent during quick recall to call group
[WMS-1142] – sys: fixed wrong notification of missed call in Collaboration for answered calls in call group
[WMS-1011] – sys: calls hung up during playback of Voicemail introduction message are now shown as missed
[WMS-1274] – sys: new kernel compatible both with hardware and cloud PBXs
[WMS-1177] – sys: fixed an issue in which only default music on hold could be played back for Dial the phone / trunk Dialplan applications
[WMS-1222] – sys: fixed an issue with calls via Integration Utility if active device was not set and no supported device was connected
[WMS-1012] – sys: fixed an issue with audio interruption on WebRTC phone caused by re-invites from trunk
[WMS-1080] – sys: Improvements for “Recover system” console operation; “Repair filesystem” command is merged to “Recover system”
[WMS-1099] – sys: fixed an issue where in some cases sipproxy could stop forwarding calls to devices connected over port 443 tls
[WMS-1330] – api: fixed a problem in which it was impossible to attach a file using Fax printer on Windows / Mac OS
[WMS-1339] – api: fixed a problem in which web page could reload continuously using Chrome extension to access Collaboration

Firmware

v. 50.145.6.24 for WP410

  • fixed an issue in which PC port did not work on WP410 if phone was configured with two VLANs (voice VLAN on LAN port and data VLAN on PC port)
  • improved ringtone playback: now it’s played back only to speaker
  • fixed an issue in which VLANs did not work; Limitation: PC port does not work if Voice VLAN + Data VLAN are configured
  • fixed handset background noise
  • added missing French translations for some menus

v. 59.145.6.7 for WP490 2015 / WP490G

  • fixed an issue in which PC port didn’t work on WP490G with VLAN configured
  • minor graphical and usability improvements

v. 5.01b for W04FXS/FXO

  • fixes a random issue with provisioning of W04FXS using DHCP mode

v. 27.18.01.09 for W24FXS 2015

  • Support of different call classes: internal, external, whitelist and splash ring (silent ring – can be used in case call forwarding is enabled or in case of DND)
  • Support of action URL with call duration parameter (sending of HTTP get request upon event)

v. 03.24.00.24 for W-AIR base stations and handsets

  • fixed an issue where base stations in multicell installations could become unreachable showing red status till reboot (issue introduced after upgrade to the last version 03.24.00.22)
  • improvements for call waiting tone (reduced length and added playback every 30 seconds)
  • fixed an issue in which busy tone was not played back on W-AIR 70 / 100 when calling an external busy number

NOTE:
Automatic upgrade of W-AIR repeaters is temporarily disabled. It is possible to manually upgrade the FW of repeaters via the base station web interface:

  1. go to Repeater menu, enter “39” into the field “WAIR-Repeater” and press “Save/Start Update”
  2. go to Repeater menu and wait till the upgrade process is finished
  3. delete repeaters and register them again following the procedure described in W-AIR System Administrator Manual (chapter 3.4. Set up Repeaters)

Hotfix version: 3.80.31442.05 Date: 04/04/2016

[WMS-1349] – wms: fixed an issue in which dnsmasq could not start due to bad DCHP range


Hotfix version: 3.80.31438.05 Date: 01/04/2016

[WMS-1348] wms – fixed an issue with DHCP server disabling after upgrade to v. 3.80.31368


Hotfix version: 3.80.31368.05 Date: 25/03/2016

Note: Includes FW version 03.24.00.20 for W-AIR base station (multicel); W-AIR Small Business Base uses Firmware v. 03.24.00.22

[WMS-1319] – dev: fixes an issue with W-AIR base disconnections in multi cell installations


New PBX Control API Date: 22/03/2016

[WMS-1248] – api: added transfer PBX API
documentation: LINK
Note: API is not related to WMS version, so no upgrade is necessary


Hotfix Version 3.80.31342.05 Date: 22/03/2016

[WMS-1301] – dev: codec g729 is now disabled for W-AIR SMB (small business base)
Note: now it is impossible to call through trunks on which only G.729 is selected using W-AIR SMB, so please make sure other codecs are added in trunk settings


Firmware for WP410 v.50.145.6.15 Date: 04/03/2016

[WMS-1252] – dev: fixed an issue in which WP410 stopped reproducing audio for the ongoing call after second incoming call had been cancelled


Hotfix version 3.80.31247.05 date: 03/03/2016

[WMS-1212] – dev: fixed WP410 mic noise when using handset


Hotfix version 3.80.31225.05 date: 01/03/2016
[WMS-1200] – wms: fixed an issue in which „Save“ button sometimes did not work on SIP-RTP page on Cloud PBXs


Hotfix version 3.80.31176.05 date: 24/02/2016

[WMS-1193] – sys: fixed an error during saving of changes on SIP-RTP page on PBXs after upgrade to v. 3.80.31106.05
[WMS-1191] – col: fixed a problem with chart export in CDR-View


Hotfix 18/02/2016

[WMS-1184] – sys: fixed an issue in which PBX was unable to complete boot without Internet connection


Version 3.80.31106.05 Date 16/02/2016

Features
[WMS-592] – wms: support for import of contacts from Exchange Server 2010-2013

[WMS-925] – wms: support for import of contacts from Office 365

[WMS-848] – wms: added call class selection to “Dial the trunk” Dialplan application

[WMS-905] – wms: added DirectRTP management via “Set” Dialplan application
notes:

  • if not set up via Dialplan, direct RTP is used only for Wildix devices
  • if disabled via Dialplan, direct RTP is turned off for all devices
  • if enabled via Dialplan, direct RTP is used for all devices (you can specify the networks in which direct RTP must be used in SIP-RTP settings)

[WMS-924] – sys: new global Dialplan variable allows you to disable audio notification in case of call forwarding: DISABLE_FORWARD_NOTIFICATION

[WMS-962] – sys: new global Dialplan variable PIN_LENGTH allows you to limit the number of digits necessary for password validation (via feature code “Login” or in case telephone is blocked)
note: the default value is 5 digits, the minimum length is 3 digits

[WMS-745] – sys: new logic of missed calls notifications
notes:

  • missed call notification, if viewed from WP, no longer appears on Collaboration and vice versa (new logic integrated for WP 2015 and Collaboration)
  • number of missed calls is displayed
  • notification doesn’t disappear after page refresh

[WMS-888] – sys: added new option to perform dynamic login / logout from call group via feature key and feature code
how-to:

  • feature code “Call group management”: 97*2*[call_group_ID], where “2” is the variable that changes the state (login / logout);
  • feature key “Speed dial”: enter the value “cgmanager*2*[call_group_ID]” into the field

note: previously there existed only two options “1” for login or “0” for logout; we add the new option „2“ that functions as a switch (login or logout)

[WMS-955] – sys: added hotline feature in WMS user preferences
how-to: “Hotline” – tick off the checkbox and specify the number; number is called automatically when user lifts the handset; supported on WP4X0 2015, FXS gateways 2014-2015

[WMS-796] – sys: added “NAT IP” field in trunks configuration to set the network connection IP

[WMS-1053] – wms: added T38 ON / OFF switch to support non-standard trunks not capable of refusing T38 re-invites

[WMS-908] – sys: hang up reason causes received from trunks and remote PBXs are now forwarded to local devices

[WMS-1048] – sys: if PBX is installed in chroot environment, SSH is now enabled on 2222 port by default,

[WMS-1017] – sys: added support for license download via HTTP proxy

[WMS-591] – col: added Voicemail tab allowing quick access to VM messages directly from Collaboration

[WMS-1009] – Added Headset integration component for Windows / Mac OS X, allowing WebRTC phone user to answer / hang up calls remotely from Bluetooth headset; supported Jabra, Plantronics, Sennheiser audio devices with USB
download from Collaboration Settings > Extensions

[WMS-877] – col: added Google Chrome Browser Extension for quick access to Wildix Collaboration
note: install in Collaboration Settings > Extensions

[WMS-890] – col: initials are now displayed in place of default avatar

[WMS-1032] – dev: improved security of WP XML browser requests

Improvements

[WMS-1168] – api: added option for HTTPS connection using webapi

[WMS-512] – sys: speeded up history sync so that last call becomes immediately visible

[WMS-1035] – sys: user is no longer called on mobility if he/she is already speaking on a VoIP device, in order to avoid iOS / Android calls interruptions

[WMS-1102] – sys: fixed an issue in which DNS record was not updated in case WMP was not available during the first request

[WMS-1083] – sys: added more formats for Call Group Pick Up Feature Codes: 5988*1 88*59*1 8859*1
note: previously only 59*88*1 format was valid

[WMS-806] – sys: record of conversations started via Dialplan now continues after attended call transfer

[WMS-979] – sys: now it’s possible to use also SIP password for TAPI driver login

[WMS-861] – sys: HTTPS port (or custom secure port specified on SIP-RTP page) is now used for WP 2015 registration in TLS

[WMS-863] – sys: improved hang up causes management in trunks / trunk groups to avoid multiple call tries

[WMS-919] – sys: *.wildixin.com DNS entry is now immediately updated after public IP change

[WMS-883] – wms: increased upload size of backups / CSV files to 20 MB

[WMS-826] – wms: two users are no longer allowed to own the same mobility number

[WMS-814] – wms: both TLS and Alternative TLS port (if specified on SIP-RTP page) are now displayed in WMS Network Settings of Server

[WMS-1123] – col: added parameter allowing user to enable pop-up notifications when in DND (Collaboration Settings > Personal)

[WMS-773] – col: fixed an issue where WebRTC phone automatically enabled the previously chosen audio device once it became available again (even in case another device was already chosen)

[WMS-718] – col: simplified CDR-View translation and usage
Fixes

[WMS-1054] – sys: sent faxes are now saved on Share in PDF format

[WMS-1045] – sys: fixed an issue where WMS network stopped working until reboot if Server WAN changed address and Client was connected via DNS Name

[WMS-824] – sys: fixed an issue with one way audio after semi-attendant transfer for calls in WMS network (issue introduced in v. 3.80.30026.40)

[WMS-1140] – col: fixed an issue in which CDR-View did not load in some cases if MySQL backend was used

[WMS-1039] – col: fixed an issue where it was impossible to select device from call dialog for call generated via “Any” device

[WMS-886] – col: chars with accents and umlauts are not shown correctly in collaboration history with MSSQL backend

Firwmare

WP410 version 50.145.5.243:
[WMS-1163] – dev: corrected microphone gain on headset and handset
[WMS-1094] – dev: audio quality improvements
[WMS-1057] – dev: speed improvements for XML Phonebook

WP480 2015 version 55.145.5.221:
[WMS-1127] – dev: new FW includes time format improvements, XML improvements
Details:

  • XML file is now automatically updated after exit from Voicemail menu
  • time format HH:MM is applied (seconds are no longer displayed)
  • minor graphical improvements

W-AIR base and W-AIR SB 03.24.00.22:
[WMS-1148] – dev: fixed an issue in which W-AIR was losing SIP registration when connected together with devices which have a longer registration timeout


New FW v. 27.18.01.07 for W24FXS 2015 Date: 14 Jan 2016

[WMS-1061] – dev: stability improvements


Hotfix version: 3.80.30709.48 Date: 11 December 2015

[WMS-986] – col: BLF configuration improvement [WMS-872] has been limited to WP 2015 only

[WMS-969] – minor performance improvements


Hotfix version: 3.80.30625.48 Date: 03 December 2015

[WMS-936] – sys: fixed an issue in which password was asked twice to unblock the phone when CID changed via „Set“ Dialplan application, introduced in v. 3.80.30446.48

[WMS-946] – sys: fixed an issue where calls on hold, received via Call group to WP600A / iOS / Android were unintentionally disconnected, introduced in v. 3.80.30446.48


Version: 3.80.30446.48 Date: 27 November 2015

New Features
[WMS-716] – dev: added TLS support for W-AIR
[WMS-734] – col: added a button to remove video conferences from the list of active conferences in Messaging menu
[WMS-760] – col: improved live search usability and added contacts photo
[WMS-810] – sys: quick recall feature for users which are busy inside a call group (using “call all” strategy)
note: new suggested timeout for call all strategy = 60 sec
[WMS-820] – col: added phone number to History of events
Improvements
[WMS-743] – wms: improved Devices page error notifications and usability, added “Comment” field
[WMS-751] – sys: caller is now informed in case remote party refused a call
[WMS-791] – wms: added a validation preventing a user from setting an incorrect RTP ports interval on SIP-RTP page
[WMS-828] – sys: Pick up of groups with index bigger than 50 is now possible
[WMS-829] – sys: call block feature is now applied only to calls to features, services, trunks and hunt groups
[WMS-837] – col: added an option to disable auto microphone gain control
note: Collaboration Settings > Web Phone > “Auto adjust mic”
[WMS-860] – wms: support of Google sync of phonebooks / users over slow Internet connections
[WMS-872] – sys: in case a user has configured a BLF key “Colleague” with his/her own extension number, this BLF is no longer displayed on the phone

Fixes
[WMS-526] – sys: fixed an issue where custom SIP port (set in “Address or Host Name”) was ignored when “From domain” was enabled in SIP trunk settings
[WMS-678] – sys: fixed an issue where in some cases BLF keys did not display correctly the presence status for some users
(otrs: 2015092310000331)
[WMS-788] – sys: fixed an issue where user status in Phonebook was not displayed correctly on W-AIR / WP4X0 2015, introduced in WMS release 3.80.29923.38
[WMS-790] – sys: fixed an issue where Public IP addresses belonging to the same /24 subnet were considered capable of direct RTP, resulting in no audio between devices
[WMS-797] – sys: fixed no audio issue between WebRTC Phone and WP600 behind two different WAN connections in Chrome 47
(Chrome 47 soon to be stable!)
[WMS-809] – sys: fixed an issue in which PBX informed of waiting Voicemail messages even if none were present.
[WMS-817] – sys: fixed an issue in which call forward to user located on another PBX did not work, introduced in WMS release 3.80.30154.44
[WMS-818] – dev: from now on W-AIR base stations automatically timely change to Daylight Saving Time / Standard Time
[WMS-836] – wms: “Record call” Dialplan application is now correctly executed also in case Called number contains the asterisk symbol (*)
[WMS-854] – sys: support upgrade via HTTP proxy
[WMS-873] – sys: fixed audio connection delay after turning on direct RTP on call groups in WMS release 3.80.29923.38
[WMS-900] – wms: optimized the logic of reconnection to Active Directory

Tasks
[WMS-880] – dev: new firmware version 59.145.5.226 for WP490 2015.
what’s new: added call and playback buttons inside Voicemail menu


Version: 3.80.30259.46 Date: 13 November 2015

Improvements

[WMS-603] – kit: now both audio and video call start when a user presses video button
[WMS-764] – wms: default Feature code 59 (Call group) changes to 79
note: this change will be applied only after system reset or for new systems

Tasks
[WMS-827] – dev: new firmware version 55.145.5.213 for WP480 2015
[WMS-834] – dev: new firmware version 59.145.5.220 for WP490 2015
details:

  • now it’s possible to set backlight to „Always On“ in all the supported languages
  • improved call waiting tone
  • phone does not show missed call notification any longer for calls answered from another device
  • audio level remains now the same during the call and during progress / ringback using headset
  • fixed an issue here audio went to speaker instead of headset for a call answered from Collaboration
  • fixed an issue with impossibility to access Call forwarding settings in „Features“ menu on WP490

 


Version: 3.80.30242.45 Date: 9 November 2015

New Features
[WMS-535] – col: added playback of busy tone to WebRTC Phone
[WMS-575] – wms: W-AIR SB model is now displayed on Devices page

Improvements
[WMS-705] – sys: improved usability of login menu via Feature code 99
[WMS-717] – col: reduced memory usage during upgrades
[WMS-728] – wms: added global Dialplan variables to set fax machine ID and header (if not set per user)
new variables „FAX_MACHINE_ID=“ and „FAX_HEADER=“ can be set in Dialplan > General Settings
[WMS-732] – sys: incoming faxes are now not accepted in case mount point is enabled but is down
[WMS-733] – sys: temp files of faxes are now saved on share / USB storage to ensure partial reception
[WMS-774] – sys: only HTTPS must be now used for WMP

Fixes
[WMS-741] – col: fixed an issue with file transfer on Firefox browser, which was introduced starting from WMS version 30071
[WMS-783] – wms: „hostname“ on Network page can now be set even in case WMP is unreachable
[WMS-789] – col: CDR-View can now load data for half a year and longer time periods, even when using internal DB storage
[WMS-795] – sys: fixed an issue in which calls via a member of a Trunk group did not work if „trunk name“ was different from „login“ value
[WMS-804] – dev: fixed occasional audio quality issues (one way audio, audio disturbed) in W-AIR multicell installations with high density of handsets


Version: 3.80.30207.45 Date: 4 November 2015

New Features

[WMS-687] – wms: added notification in case there are unsecure passwords on users page

Fixes
[WMS-443] – col: fixed in issue where in some cases video did not work between Web phone on browsers supporting H.264 and iOS / Android apps
note: here you can find more information about Web Phone video support on different browsers.
[WMS-744] – sys: BLF keys now work correctly in WMS network also for phones which use TLS
(otrs: 2015100210000047)
[WMS-771] – col: CDR-View synchronization now works correctly also for time zones with negative UTC offset
[WMS-778] – sys: fixed a problem with downloading Partner Logo via WMS
[WMS-779] – wms: fixed an issue where import of users did not work on some PBXs due to impossibility to save settings for import


Version: 3.80.30197.44 Date: 30 October 2015

New Features
[WMS-525] – col: Windows Integration Utility version 2.3.40
[WMS-715] – wms: added option „Show original caller number“ in PRI / BRI trunk configuration

Improvements
[WMS-709] – sys: added name to call recording email notifications
[WMS-722] – sys: correct hang up reasons are now sent for calls terminated from Collaboration / TAPI

Fixes
[WMS-375] – wms: fixed an issue with no audio in case of direct RTP for calls answered from local phone if FXO was used to route the outgoing Mobility call
[WMS-738] – sys: fixed an issue where VLAN ports configured on WAN port were automatically disabled when LAN port was disconnected
[WMS-750] – col: fixed an issue where Grouping by User did not work in CDR-View
[WMS-763] – col: fixed an issue where Grouping by Company, Business partner did not work in CDR-View on Chrome browser
[WMS-681] – sys: fixed an issue where WAN interface on WGW PBXs 2015 in rare situations could become unreachable


Version: 3.80.30154.44 Date: 27 October 2015

New Feature
[WMS-504] – wms: added „Message for operator“ option for „Intercom“ and „Dial the phone“ Dialplan applications

Improvements
[WMS-548] – col: CDR-View support in Chrome 45
limitation: only one user can use CDR-View on one Windows PC at the same time
note: Java is no longer necessary also for other browsers
[WMS-596] – col: in case previously selected device is no longer available in Collaboration, device selection field becomes now empty, allowing you to select another device
[WMS-675] – col: added Drag&Drop File Transfer for „Colleagues“ tab / „Recents“ and chat conversation section for „Messaging“ tab
Colleagues tab: Drag&Drop a file on a user
Messaging tab: Drag&Drop a file on a user in „Recents“ section / into the chat conversation with the user

Fixes
[WMS-706] – wms: fixed an issue where type of call for contacts imported from Google was always set to „External“
[WMS-731] – col: fixed an issue where in some scenarios calls via Web Phone could be refused


Version: 3.80.30151.43 Date: 23 October 2015

Improvements
[WMS-543] – dev: added the Voicemal access menu for WP4X0 2015
note: menu is available only in case „pbxinternal“ or „pbxservices“ is present in the Included Procedures of the Dialplan procedure the user of the phone is following
[WMS-621] – wms: added links for direct access to PBXs from Users > PBXs
[WMS-699] – dev: improved W01FXS 2014 disconnection tone

Fixes
[WMS-584] – sys: fixed an issue with Reachable by phone / Offline status changing to Offline after the user had placed / received a call in WMS network
[WMS-655] – sys: fixed an issue in which check-in operation sometimes could not be completed due to the database error
[WMS-666] – col: fixed an issue with participation in local audio conferences using WebRTC Web phone
[WMS-694] – col: fixed an issue in which Screen sharing sometimes could not be started from call dialog window
[WMS-708] – wms: SIP trunk option „Show original caller number“ now works correctly also for calls via Trunk groups


Version: 3.80.30128.43 Date: 20 October 2015

Fixes
[WMS-566] – api: improvements of TAPI driver for multi line usage, version 1.4.0.210
[WMS-666] – col: fixed a problem with local audio conferences using WebRTC Web phone
[WMS-668] – wmp: PBX upgrade to unsupported versions is no longer possible
note: it is not possible to update to WMS3 before upgrading to the latest WMS2
[WMS-679] – wms: fixed an issue which prevented using special characters in some Dialplan applications (otrs: 2015100710000011)


Version: 3.80.30120.42 Date: 16 October 2015

New Features
[WMS-670] – wms: added ACL „can/cannot use“ Web phone
note: Web Zero Distance is changed to Web phone
[WMS-684] – dev: support TLS for W24FXS 2015

Improvements
[WMS-559] – wms: merged call group status and pick up call group BLF keys
notes:
– BLF is renamed to call group
– press BLF to dial call group; when blinking, press to pick up a ringing call; press BLF during a call to perform call transfer
– to pickup a call of a call group via feature code: enter feature code „call group“ (59 by default) * feature code „pickup“ (88 by default) * callgroup ID and make a call;
example: to pickup a ringing call of a call group with ID number 11, enter 59*88*11 and then send a call (otherwse enter 598811 without „asterisk“, and then send a call).
– after performing update to this version make configure/sync of phones using this BLF key
– removed local phonebook BLF (can be set in WMS user preferences via custom code LOCALGROUP)

[WMS-604] – mcu: added HTML multilanguage email invitation
[WMS-654] – dev: improved flash-hook detect on W24FXS 2015

Fixes
[WMS-658] – col: now it is possible to answer a call from W-AIR in Collaboration even if more than one registration is present
[WMS-690] – wms: fixed an issue where in some cases phonebook import did not work


Version: 3.80.30098.42 Date: 13 October 2015

Fixes
[WMS-618] – sys: fixes and improvements of speed dial feature
feature works now also for private phonebooks and for all the phonebooks in „available“ section (if not restricted by ACL); feature works now also for extension, office, home and home mobile phone numbers of the contact
[WMS-645] – col: fixed an issue where live search did not display results when window was minimized
[WMS-658] – col: now it is possible to answer a call from w-air in collaboration even if more than one registration is present


Version: 3.80.30083.41 Date: 9 October 2015

New Features
[WMS-607] – wms: new blf indications on wp4x0 2015
green = active call (switch/table status = on); blinking = ringing (3 state switch/table = extra/check time); off = idle (switch/table = off); red color is no longer used
[WMS-672] – dev: added support for alternative secure port for w-air base and w-air sb for provisioning

Improvements
[WMS-619] – col: new icon for kite chat transfer

Fixes
[WMS-605] – sys: fixed an issue in which wp600a did not show vm notifications when connected via lan port of pbx
[WMS-614] – wms: fixed an issue in which sqlite cdr backend was enabled even for models bigger than wgw40 after pbx reboot
[WMS-617] – sys: fixed an issue in which voicemails were unavailable from collaboration history in some cases
[WMS-647] – sys: ssh terminal access now works also on mac os x el capitan
[WMS-657] – wms: fax sent notifications for mail2fax now work also in case attached document has old pdf version
[WMS-677] – dev: fixed an issue in which w04fxs in some cases could be displayed with incorrect user-agent after
[WMS-676] – sys: fixed an issue with kite call dropping after 30 seconds, introduced in version 3.80.30052.41


Version: 3.80.30052.41 Date: 6 October 2015

New Features
[WMS-374] – wms: added possibility to disable hold requests from trunks
how to: disable the option „support refer and hold“ in sip trunks settings
[WMS-388] – col: windows integration utility version 2.3.22
what’s new in this version: usability improvements; printer driver support on Windows 10

Improvements
[WMS-553] – col: added encoding to utf8 format during contacts import to improve support by cdrview
[WMS-564] – col: added auto save of changes performed on a contact in phonebook after contact is closed

Fixes
[WMS-615] – col: drag & drop attended transfer now works on safari
[WMS-622] – col: fixed an issue in which default fields could not be disabled for user import
[WMS-626] – wms: addressed an issue in which devices page was not displayed in some cases
[WMS-640] – sys: fixed incorrect xmpp service status on system status monitoring page


Hotfix Date: 2 October 2015

[WMS-652] – sys: fixed an issue in which invites not matching any user or trunk were routed to main diaplan procedure


Hotfix Date: 1 October 2015

[WMS-646] – sys: fixed an issue in which incoming calls did not work via sip trunk in case registration was not enabled


Version: 3.80.30026.40 Date: 30 September 2015

New Features

[WMS-242] – iu: datev software integration (beta)
[WMS-288] – col: centralized chat history management version (beta)
[WMS-347] – sys: support of update of ip address related to domain used as registration proxiy in sip trunks settings
[WMS-546] – col: added send mail ability to contact from history menu
[WMS-551] – wms: added acl ability can / cannot use phone settings menu
[WMS-563] – wms: sync of pbx hostname with wildixin domain
note: pbx domain name is now synced with system name in system > network
[WMS-599] – col: added indication in status if user is reachable via sip phone
[WMS-637] – dev: support for remote provisioning using alternative external secure port for w01fxs 2014 device
Improvements

[WMS-598] – sys: mandatory https connections to improve reliability of upgrades via http proxies and security
[WMS-602] – col: minor design improvements

Fixes

[WMS-337] – sys: fixed an issue which could cause call drop after return from transfer in wms network
(otrs: 2015070610000135)
[WMS-373] – wms: fixed an issue in which during mobility call back original number was displayed also when option „show original number“ was off
[WMS-467] – sys: fixed an issue with one way audio for a call in wms network coming from bri trunk
(otrs: 2015070610000135)
[WMS-511] – wms: fixed an issue in which dial phone application could only reproduce the default music on hold
[WMS-527] – col: fixed a problem with cdrview report export as image via https
[WMS-586] – col: in case no media device is available, webrtc zd is no longer displayed in devices list; the notification on how to enable the choice of media devices is displayed in zd settings
[WMS-611] – col: fixed an issue with saving shortcuts in phonebooks
(otrs: 2015092410000081)
[WMS-616] – sys: failed faxes are now displayed in collaboration history also after user moved to another pbx
[WMS-631] – wms: fixed an issue in which setting of itc function via dialplan caused call hangup after 30 seconds
[WMS-634] – dev: fixed an issue in which incoming fax over w01fxs 2014 failed if answer tone was absent


Hotfix version: 3.80.29942.41 Date: 29 September 2015

[WMS-632] – sys: fixed an issue in which licenses could not be automatically updated on vm pbxs after upgrade to ver. 3.80.29805.35


Hotfix version: 3.80.29942.40 Date: 24 September 2015

[WMS-601] – sys: fixed an issue in which pbx considered devices, belonging to a local non-standard network, remote


Version: 3.80.29942.39 Date: 23 September 2015

New Features

[WMS-300] – col: support for transfer via drag & drop
take the user image (or name) from the call window, drag and drop it on another user
[WMS-409] – wms: added direct access to devices connected to the pbx from devices page
it works in case it’s not a cloud pbx; devices are in the same network as the pbx; wildixin domain is used
[WMS-435] – col: messaging tab improvements
[WMS-487] – sys: support of sending two files via fax server

Improvements

[WMS-485] – wms: devices that had already been provisioned are no longer shown during scan
[WMS-556] – col: reduced audio notifications volume during calls

Bugs

[WMS-531] – col: fixed a problem in which webrtc zd could lose registration after some time
[WMS-579] – wms: fixed an issue in which pbxs on geode platform pre 2012 could not complete upgrade from version 2 – 3.40 to 3.80
[WMS-581] – sys: security improvement for ssh connection to pbx


Version: 3.80.29923.38 Date: 18 September 2015

New Features

[WMS-282] – wms: added support for tls transport for trunks
[WMS-480] – col: added a new status in azure color for offline users who have a connected phone
[WMS-497] – sys: tls is now turned on by default for remote devices
note: on sip-rtp page you can enable/disable the option „use tls/srtp for local devices“ (except cloud pbxs)

Improvements

[WMS-169] – sys: direct rtp is now enabled for calls answered from a call group
[WMS-321] – sys: added authentication for audio re-invites after failed t.38 re-invites
[WMS-326] – wms: added re-invite to audio for fax server in case t.38 is not accepted
[WMS-494] – col: previous fax / voicemail events now can be viewed even after moving to a new pbx
[WMS-542] – api: it is no longer allowed to remove original room names during checkin; added alphanumerical ordering of rooms
[WMS-569] – dev: backlight timeout is now always set to „on“ for exp module

Bugs

[WMS-508] – kit: fixed an issue in which one could add users to mcu only if wildixin domain was used
(otrs: 2015081110000052)
[WMS-558] – sys: fixed an issue in which user could see from wp phone colleagues belonging to an acl blocked group
[WMS-568] – wms: password is now visible in welcome message even if special chars are used
[WMS-570] – wms: non existing dialplan error in users page is now displayed only for local users
[WMS-585] – sys: fixed an issue in which for some pbxs upgrade from version 2.80 to 3.40 could not be completed


Version: 3.80.29876.38 Date: 16 September 2015

Hotfix

[WMS-560] – sys: fixed no audio issue for remote webrtc zd clients connected via external ip to pre 2014 pbxs


Hotfix date: 11 September 2015

Fixes
[WMS-567] – sys: fixed an issue in which only 20 webrtc zd clients could connect to pbx
note: number of connections is now restricted according to pbx license limitations


Version: 3.80.29876.37 Date: 10 September 2015

Fixes

[WMS-533] – sys: fixed an issue which could cause no audio on remote devices after change of some sip-rtp parameters (external ip change)
[WMS-534] – sys: fixed an issue in which webrtc web zd received as rtp candidate only wan (public) ip even if client was connected via lan port, causing audio problems
[WMS-539] – col: fixed an issue in which call window was not displayed if attendant console was closed during the call
[WMS-540] – sys: fixed an issue which could break connection to webrtc zd, if web socket connection was updated during the call (zd could disappear from device list)
[WMS-544] – col: fixed an issue with cdrview not loading in some rare cases (db containing non utf8 chars)
[WMS-547] – dev: addressed an issue with bad audio quality on w-air sb when using codec g729
[WMS-549] – sys: fixed an issue with no audio for calls from webrtc zd to ios
[WMS-557] – col: fixed an issue in which statuses of some users on colleagues page in some rare cases could not be displayed on chrome


Version: 3.80.29857.37 Date: 7 September 2015

New Features

[WMS-253] – wms: wildixin domain received from portal is automatically set on pbx
Note: now you can change the alias name of pbx in wms network either from wms (pbx > wms network) or from wmp; pbx domain name is displayed in wms users > pbxes;
[WMS-536] – dev: added support for auto.wildixin.com provisioning for bri / pri / fxs08 gateways

Fixes

[WMS-505] – sys: fixed an issue with incorrect visualization of special chars with mail2sms service
[WMS-506] – sys: addressed an issue in which pbx was always sending keep alive messages to port 5060
[WMS-507] – sys: now it is possible to make a gsm moblity call even if external line prefix is not set
[WMS-517] – dev: # is no longer added to called number in case the number starts with * (for w24fxs 2015)
note: # in this case is used to send the call
[WMS-523] – wms: in some cases phonebooks are not visible in wildix collaboration after upgrade to rel 3.80
[WMS-537] – col: fixed an issue in which play device selected in webrtc zd was used only for the first call


Version: 3.80.29829.36 Date: 1 September 2015

New Features

[WMS-401] – sys: connect to calling user when outgoing call is directed to the same number
note: previously in case two users tried to call each other after the call has been disconnected (e.g. call drop), they both could hear „user is busy“ message, now the system automatically bridges the calls.

Improvements

[WMS-474] – sys: addressed an issue when history sometimes could not be displayed on wp phones in case sqlite cdr backend is used

Fixes

[WMS-510] – dev: removed the entry „reset to factory defaults“ from settings menu of wp4x0 2015


Version: 3.80.29805.35 Date: 27 August 2015

New Features

[WMS-434] – col: added filter to search by outgoing / incoming calls in history tab
[WMS-366] – wms: added support of isdn transfer capability over isdn per call
How-to: Before the Dialplan application „Dial the trunk“ / „Trunk group“, add another Dialplan application „Set“ > ITC (enter manually) > 3.1Khz / unrestricted / speech (enter one of the values manually; by default, „speech“ is set)

Improvements

[WMS-170] – sys: upgraded internal ldap server version
[WMS-232] – kite: added the possibility to start screen sharing for kite user on mac os x
[WMS-335] – wms: increased recording length in case mp3 is used
Note: before sending an email, the recorded parts are joined together (the max. attachment size is 5 mb)
[WMS-407] – wms: added support for interdigit for w24fxs 2015
Limitation: interdigit timeout can be set in the range of 3-10 sec
[WMS-412] – wms: enabled possibility to set up alarm clocks for all users (except fax users)

Fixes

[WMS-267] – sys: improved logic of switching to the right socket in WMS network, to resolve a problem in which Client sometimes could not connect to Server in case of specific firewall settings or connectivity problems
[WMS-367] – wms: fixed an issue in which tapi license could not be reloaded
Note: once expired, it was impossible to enable a new one on the pbx by pressing „Refresh via internet“
[WMS-378] – wms: fixed an issue in which devices could someimtes fail to register after pbx reboot/update
[WMS-405] – wms: it is no longer allowed to use the same „short number“ field for several contacts in phonebook
[WMS-438] – sys: fixed a problem with wrong monit configuraion for n2n client
[WMS-446] – wms: fixed an issue in which wp4x0 2015 screen could not display all details of phonebook contact
[WMS-450] – wms: addressed an issue in which windows shares could stop working due of connection timeout
[WMS-452] – dev: fixed an issue with random w-air handset disconnection issue after roaming
Note: disabled support for multiple handsets with the same account on w-air multicell base station
[WMS-454] – wms: fixed an issue in which it was impossible to unassign devices in devices tab
Note: unassign = register to „unknown“ account
[WMS-461] – sys: invalid / bad sms files are now correclty processed by sms daemon
[WMS-476] – dev: fixed an issue with w04fxs losing registration if registered to the same account as a device with a longer registration timeout
[WMS-483] – dev: fixed an issue in which semi-attendant transfer could not be completed in case there was another incoming call on wp490 2015


Version: 3.80.29703.34 Date: 18 August 2015

Fixes

[WMS-460] dev: fixed an issue with incorrect blf led behavior of wp4x0 phones 2015
Note: to apply the changes it’s necessary to reboot the phones after upgrading to this version


Version: 3.80.29703.32 Date: 1 August 2015

Fixes

[WMS-438] sys: fixed an issue with wrong monit configuraion for n2n client


Version: 3.80.29703.31 Date: 30 July 2015

Fixes

[WMS-428] – dev: fixed an issue in which ringtone was played back to headset instead of speaker on wp480 2015 (while in headset mode)
[WMS-433] – dev: fixed an issue in which ringtone was played back to headset instead of speaker on wp490 2015 (while in headset mode)


Version: 3.80.29691.31 Date: 29 July 2015

New Features

[WMS-289] – wms: fias telephony integration support

Improvements

[WMS-396] – iu: windows iu new version 2.3.11

Fixes

[WMS-341] – dev: reduced playback gain on w24fxs 2015 reduce to improve fax transmission
[WMS-406] – sys: option privacy header for sip trunks is now used only when calling via feature code 92 (hide number)
[WMS-414] – sys: fixed an issue in which history did not load on wp4X0 2015 after receiving a call from kite with email field


Version: 3.80.29655.30 Date: 27 July 2015

New Features

[WMS-345] – col: added dutch translation

Improvements

[WMS-323] – wms: import procedure improvements
[WMS-342] – wms: added support for progress media in dialplan applications “play sound” and “play sound and wait for digits” (via the option “do not answer the call”)
[WMS-384] – wms: added example of multi codec usage in set codec dialplan application

Fixes

[WMS-278] – sys: fixed an issue in which dns service could be shown running with error in system information
[WMS-292] – sys: fixed an issue with monit-slapd-sync memory leaks
[WMS-320] – iu: windows iu new version 2.3.8
[WMS-348] – col: fixed an issue in which status of user performing an attended transfer was not correct (otrs: 2015052710000171)
[WMS-353] – sys: if no devices are available, unavailable message is now reproduced to the caller and pre-answer services are enabled
[WMS-395] – sys: fixed an issue in which in some cases cdr mssql settings could not be saved
[WMS-398] – wms: fixed an issue in which feature codes could not be saved after they had been changed (issue introduced in wms version 3.80.29604.28)
[WMS-400] – dev: fixed an issue in which in case of two ongoing calls on wp490 2015, putting a call on hold and resuming via remote call control caused no audio
[WMS-402] – dev: added support for transfer via blf for wp480 2015; remote provisioning using tls alternative port (external secure port) is now working correctly for wp480 2015
[WMS-364] – dev: interdigit timeout parameter is now applied to wp4xo 2015 only when in handset mode (when in speaker and headset mode, call does not start automatically)
[WMS-404] – wms : provisioning of W24FXS version 27.18.01.03 works correctly now


Version: 3.80.29604.28 Date: 21 July 2015

New Features

[WMS-256] – wms: new dialplan design
[WMS-316] – wms: added feature codes for setting alarm clocks and mur (make up room) state

Improvements

[WMS-249] – wms: added support for t1 interfaces on pri gateways
[WMS-274] – sys: added one second billing block option in pricelists
[WMS-285] – mcu: improvements
[WMS-294] – wms: added a new fax detect checkbox „and continue execution“ in dialplan
notes: if enabled, dialplan execution continues without waiting for a number of seconds specified in fax detect time; the feature is enabled by default, but disabled in the existing dialplan procedures
[WMS-325] – mcu: conference life increased to 3 months
[WMS-376] – wms: mobility call confirmation is now played back for three times
[WMS-283] – sys: added the possibility to use the same „auth login“ for two and more sip trunks
[CONVENTION-4463] – dev: disabled sms delivery confirmation report sending on w01gsm
note: issue was introduced in the fw version 27.20.01.25

Fixes

[WMS-225] – sys: transfer and recording feature codes for mobility calls and over wms network work correctly now
note: this issue was introduced with the wms version 3.80.29117.18 (otrs: 2015061510000183)
[WMS-233] – sys: fixed an issue in which dtmf inband did not work for outgoing calls before answer (otrs: 2015061610000118)
[WMS-277] – sys: fixed an issue in which a sip trunk variable ${sipdomain} did not work correctly
[WMS-306] – wms: fixed an issue in which cdrview couldn’t match office/home/home mobile numbers to contact names
[WMS-324] – col: fixed an issue in which call history api did not work if password to cdr backend included special symbols
[WMS-329] – dev: fixed an issue which caused unregistering of w04fxo after ip had been changed through dhcp
[WMS-333] – sys: time of voicemail messages is now pronounced correctly in german language
[WMS-337] – sys: fixed an issue with call drop in case of return from transfer from wms network – (otrs: 2015070610000135)
[WMS-339] – dev: added support for transfer via blf for wp490 2015
[WMS-340] – dev: fixed an issue in which w24fxs 2015 could not play back incoming dtmfs
[WMS-365] – wms: fixed an issue with displaying isdn status for gateways in case tls transport is used


Hotfix Date: July 15 2015
New FW for W04FXS/FXO, version 3.08y

  • fixed an issue in which w04fxo could not re-register in case ip has been changed through dchp

Version: 3.80.29530.27 Date: July 13 2015

New Features

[WMS-201] – wms: added the option to preserve original incoming number in case of call forward to sip trunks
[WMS-209] – mcu: added possibility to dial users when inviting them to a conference
[WMS-284] – wms: added priority feature for call groups to allow expedite answer of operators to vip customers

Improvements

[WMS-262] – wms: sip trunk settings refactoring
[WMS-270] – wms: added ringtone playback during calls between devices of the same user
[WMS-281] – col: removed external line prefix from outgoing caller id in case of mobility (gsm) callback (wildix collaboration mobile)
[WMS-287] – wms: updated icons on users page

Fixes

[WMS-245] – sys: fixed an issue with no audio until answer when using music on hold as ringback after semi-attendant transfer
[WMS-241] – sys: fixed no audio issue after semi-attended transfer in wms network
[WMS-243] – wms: fixed an issue in which the flag „skip pin check“ in dialplan application „voicemail access“ was not applied
[WMS-268] – kit: added option to automatically enter the widget chat when sign on via api is used (note: it’s necessary to update the code of kite widget on the website)
[WMS-279] – wms: fixed an issue in which upgrade could not be completed in case of page refresh during upgrade procedure (note: the fix works after having performed the upgrade to this version)
[WMS-305] – sys: fixed an issue introduced with wms version 29339.25, in which the flag „enable wideband codec usage in lan“ on sip-rtp page was not applied


Hotfix Date: July 8 2015
New FW for W04FXS/FXO, version 3.08x

  • fixed an fxo issue in which during an incoming call, invite was sent from fxo to pbx with delay
  • fixed an issue in which fax could be partially received, the issue was introduced in the version 3.80.29415.26

Version: 3.80.29415.26 Date: July 2 2015

New Features
[WMS-231] – wms: added fast configuration via admin password for wp600a

    NOTE: now it is possible to make a login for any wp600a user in lan using the admin password

 

[WMS-240] – col: added support h.263 and h.263+ in webzd
[WMS-254] – sys: added support of h263+ codec
[WMS-219] – dev: w24fxs 2015 enabled callwaiting tone for user accounts and added national tone selection

Improvements
[WMS-175] – kit: added displaying of kite user email as caller number if available
[WMS-180] – col: added an option to create mcu conferences without opening a colleague chat first
[WMS-229] – wms: improved login window
[WMS-236] – col: load time and server resource usage improvement
[WMS-246] – wms: added p-preferred-identity header option in cid header of sip trunk configuration window
[WMS-259] – dev: w24fxs 2015 t.38 fax ecm mode disabled to increase compatibility

Fixes
[WMS-129] – wms: fixed issues with dialplan configuration, devices passwords, sounds, cdr settings during the upgrade from 2.x to 3.x
[WMS-146] – sys: now the system returns automatically to audio session in case remote peer does not support t38

    NOTE: the option to disable t38 has been deleted from sip trunk configuration page, as no longer needed

 

[WMS-191] – dev: fixed one way audio issue after semi-attended transfer from sip trunk to w08-16-24fxs pre 2015
[WMS-226] – wms: fixed an issue in which pick up of own call was not possible
[WMS-260] – dev: fixed rare w-air audio quality issue in multi cell installations (note: fixed in fw version 03.24.00.11)


Version: 3.80.29355.26 Date: June 26 2015

Hotfix
Fixed an issue with remote provisioning of w01fxs 2014 introduced in the version 3.80.29355.25

Version: 3.80.29355.25 Date: June 25 2015

WMS Network Upgrade Notes: First update Client PBXs, then proceed with upgrading the Server

New Features
[WMS-125] – api: hotel improvements to handle guest name
[WMS-137] – wms: added automatic sync of domain users from google
[WMS-172] – wms: support for login field in users configuration

note: due to this feature, it is necessary to upgrade first the Client PBX in WMS network, then the Server

[WMS-182] – wms: added automatic configuration of devices in local networks
[WMS-239] – dev: added support for auto.wildixin.com provisioning in w04fxo/fxs and w01fxs gateways
[WMS-198] – wms: added „trunk name“ parameter for sip trunk configuration

    note: the old parameter „trunk name“ has been renamed to „title“, while the new parameter „trunk name“ is used as an additional optional parameter, thanks to which it is now possible to add more than one trunk with the same Auth Login name

[WMS-204] – dev: added support for multiple handsets with the same account on w-air
[WMS-208] – dev: added support for remote provisioning using tls alternative port („external secure port“ defined on sip-rtp page) for wp phones 2009-2014
[WMS-221] – dev: added support for remote provisioning using tls alternative port for the following wildix devices: pri and bri media gateways, w16fxs, w08fxs, w24fxs (including 2015 series), w04fxs, w04fxo, w01fxs (old generation), w01gsm

    note: remote provisioning using tls alternative port works using only http (not https)

[WMS-213] – dev: enabled caller-id parameter on w24fxs 2015

Improvements
[WMS-98] – sys: from now on the address and port provided by the operator (if provided) is used instead of external address detected or set by user
[WMS-185] – col: removed notification to install integration utility
[WMS-196] – wms: from now on the feature key name instead of type is displayed for timetable / switch / trunk / sd for wp4x0 2015 (blf keys and exp module)
[WMS-210] – dev: disabled dial time out function for wp4x0 2015 phones
[WMS-214] – dev: from now on in case of a failed t38 session, w01fxs 2014 sends re-invite to the same codec agreed during the call
[WMS-223] – col: added google single sign-on for wms/collaboration

Bugs
[WMS-84] – wms: fixed an issue when features page was not editable if the symbol & was used in company field
[WMS-155] – col: fixed an issue when webzd did not save audio settings for some devices
[WMS-158] – col: fixed an issue with webzd connecting via udp 5060 when a domain name was used
[WMS-205] – wms: fixed an issue where auth login field in trunk configuration was not used for registration requests
[WMS-224] – dev: fixed an issue with displaying bri media gateway ip address instead of anonymous as callerid for incoming calls (this issue appeared in the version 3.80.29245.2)
[WMS-227] – wms: addressed an issue where auth cookies were not deleted after logout
[WMS-230] – wms: fixed an issue when in some rare cases Client PBX could not connect to WMS network returning the error „type or value does not exist“
[WMS-237] – dev: fixed an issue where w04fxs / w04fxo did not re-invite to audio after a failed t38 re-invite
[WMS-238] – dev: addressed an issue with missing ringtone after refer to w04fxs


Version: 3.80.29298.24 Date: June 15 2015

Improvements

[WMS-124] – wms: adds caller id header and privacy header parameters for sip trunks registration

[WMS-60] – sys: adds notification to caller in case the number does not exist.
NOTE: This feature introduced with the version 3.80.29270.2 has been removed.


Version: 3.80.29286.24 Date: June 11 2015

 

Bugs

[WMS-176] – sys: fixes an issue where remote support could stop working because of multiple vpn client instances

[WMS-195] – wms: fixes an issue introduced with the version 3.80.29270.2 where default dialplan destination did not work correctly
Improvements

[WMS-178] – dev: w01fxs 2014 improvement in fax detection and support for rtp fax transmission fallback

[WMS-190] – sys: enables immediate voicemail access upon dialing feature code 81


Version: 3.80.29270.2 Date: June 10 2015

Improvements

[WMS-149] – sys: improved resource usage in case of high number of call recordings

    Limitation: Only the first three files are now displayed in Wildix Collaboration History for one call (in case a call recording was stopped and restarted several times)

New Features

[WMS-60] – sys: adds notification to caller in case the number does not exist

[WMS-171] – col: enables use of department field when available instead of acl group, for grouping users in colleagues menu

[WMS-179] – dev: adds support for voicemail notifications for w-air handsets


Version: 3.80.29260.23 Date: June 9 2015
Bugs
[WMS-38] – sys: fixes an issue when under certain conditions pbx did not allow calls over wms network after reboot or network interfaces restart

[WMS-51] – wms: fixes issues with colleagues list when large numbers of users are present

[WMS-112] – dev: fixes an issue with applying quick dial patterns for wp600 (first generation)

    Note: Quick dial patterns can be set here: WMS > Dialplan > General Settings, „Set quick dial patterns“

[WMS-165] – sys: fixes an issue when pbx could freeze if mounted nfs share was not available

[WMS-177] – col: fixes an issue which made it impossible to answer calls via webzd in case a user already had three ongoing calls

[WMS-188] – wms: removes users call group limitation for wgw08 and wgw16 models introduced in version 3.80.29199.22
New Features
[WMS-70] – api: new tapi driver version 1.4.0.170

[WMS-105] – col: adds pick up feature for users in ringing status

 


Version: 3.80.29245.23 Date: June 5 2015
[WMS-136] – wms: support for automatic sync of phonebooks from google


Version: 3.80.29245.22 Date: June 5 2015

Improvements
[WMS-168] – wms: support import of more than 1000 phonebook items from ldap

[WMS-36] – sys: save sent faxes always in pdf format

[WMS-45] – wms: improvements to support up to 5k users

[WMS-87] – wms: redesign of upgrade page

[WMS-104] – wms: use by default the first available cdr backend

[WMS-115] – col: accept fax files for transfer in a4 horizontal position
New Features

[WMS-127] – dev: adds parameter to enable blind transfer via blf transfertype in provisioning configuration (wp phones, old generation)

    • How-to: edit the file /rw2/etc/provision.conf, update the section [wildixp] with parameter:
    BLFTransType=blind

[WMS-140] – wms: storages page improvements and nfs share support


Version: 3.80.29199.22 Date: May 27 2015
Bugs

[DEV-48] – dev: fixes w-air smb error (603 declined) if user calls himself

[WMS-3] – sys: fixes music on hold quality issues when using ring all strategy in call groups

Note: new logic of call distribution in high load conditions (large call groups using ring all strategy) for wgw8-16 2007-2012, wgw40 2007-2009: ring the first five call group members, then ring the remaining call group members

[WMS-110] – wms: provisioning bugs and improvements for wp490 2015

[WMS-119] – kite: adds german translation

[WMS-157] – dev: fixes rare one way audio calls on w01pri w02pri due to missing dsp resync

[WMS-159] – sys: fixes problem with calls to trunk on remote pbx
Improvements

[WMS-156] – dev: optimizes strategy of handsets distribution to w-air base stations in high density conditions

[WMS-2] – col: support video in webzd (allow to enable video for all webzd calls)


Version: 3.80.29154.21 Date: 25 May 2015

Bugs

[WMS-5] – wms: auto limit pcap trace files size to available space and improve trace page

[WMS-59] – sys: options keep alive packets do not work if outbound proxy is used

[WMS-66] – wms: billing blocks are not used during call price calculation

[WMS-121] – dev: phone number is not displayed in phonebook of w-air and wp 4×0 2015

[WMS-143] – col: impossible add colleague to roster via live search

[WMS-148] – dev: w24fxs 2015 provisioning does not work if all 24 ports are assigned

[WMS-27] – col: colleagues view is not shown correctly under chrome after re-sizing the window

[WMS-117] – col: after saving function keys configuration devices are notified multiple times

 

Improvements

[WMS-15] – wms: add outbound proxy, reg expiry and dtmf mode inband support in sip trunks

[WMS-43] – col: video dialog improvements

[WMS-82] – dev: improve provisioning to use the same firmware file for fxs and fxo devices

[WMS-99] – sys: allow upgrade of hotel models to wms 3

[WMS-106] – sys: sip proxy protection for clients which repeat subscriptions

[WMS-118] – wms: show wp600a image in users page and collaboration

 

New Features

[WMS-24] – wms: add private dns server per trunk dns domain resolution

[WMS-17] – sec: support for tls 1.1 / 1.2 in web / sip proxy

[WMS-37] – sys: improve space usage to allow upgrade of wgw08-16-40 2008-2010 pbxs


Version: 3.80.29117.19 Date: 12 May 2015
New Features
[WMS-40] – wms: support for rfc2833 dtmf payload type in trunks configuration
[WMS-80] – wms: support alternative rfc2833 rtp payload in sip trunk for incoming calls
[WMS-96] – wms: support for new wp490 2015
Improvements
[WMS-21] – col: show faxes sent via fax relay as originated by the user using the feature
Fixes
[WMS-92] – sys: system memory partition is full because temporary fax files are still in use by pbx
[WMS-94] – wms: numbers for gsm callback passed through android app are not standardized
[WMS-103] – sys: memory disk space exhaustion in case of high number of web authorizations
[WMS-113] – sys: remove ldap dump / restore script after upgrade which caused random users reset
[WMS-72] – sys: room sip accounts are not allowed to connect to pbx


Version: 3.80.29097.18 Date: 8 May 2015
Fixes
[WMS-107] sys: production script which resets system is not removed after first boot

NOTE: Issue is present ONLY on the latest PBXs
(Serial numbers range of the PBX affected: 9C7514204190 – 9C751420431C)


Version: 3.80.29097.17 Date: 6 May 2015
Improvements
[WMS-74] – wms: enable block of mcu conferences creation via users acl
[WMS-90] – wms: support basic authentication for cgi scripts in /scripts/ subdirectory
Fixes
[WMS-78] – wms: sound file record does not work for wp480r2
[WMS-89] – wms: active directory integration login using username does not work from release 3.60.28445.52
[WMS-93] – dev: provisioning does not work for w01fxs from rel 3.80.29084.17


Version: 3.80.29084.17 Date: 30 April 2015
New Features
[WMS-54] – mcu: support of the service when only port 443 tcp is available
[WMS-18] – dev: add support for w24fxsr2
[WMS-69] – api: add methods in webapi to retrieve channel id
Improvements
[WMS-25] – col: html5 notifications on chrome mac os x when pressed do not display the collaboration tab
[WMS-35] – col: show fax transmission information in history
[WMS-62] – kite: use https for firefox
[WMS-61] – wms: rtp keep alive function to keep audio sessions active with trunks
[WMS-67] – wms: enable price list management and calculation without cdrview license
Fixes
This version resolves the following issues:
[WMS-14] – sys: sip proxy does not start if prefix of sip domain contains only numbers
[WMS-26] – col: sms cannot be sent to phone numbers less than 10 digits
[WMS-39] – sys: crash during license reload under heavy load
[WMS-64] – sys: fixed firewall rules for bri / fxs gateways behind nat
[WMS-77] – kite: calls do not work using chrome ver 42
[WMS-85] – dev: wp400 cannot be provisioned from release 3.80.28997.16
[DEV-36] – dev: wair does not send RTP during attended transfer started from collaboration (fw 03.24.00.07).


Acronym Legend

col = Wildix Collaboration
wms = Wildix Management System
kite = Wildix WebRTC Kite
mcu = Wildix MCU Conference
sys = System
dev = Devices
sec = Security
api = Wildix TAPI and WebAPI