WMS Beta Changelog | rel380beta

Update from rel380beta repository and install the latest WMS beta
to be the first one to try Wildix features, improvements and fixes

Note: Upgrade to version higher than 3.84.x is not possible for Hardware PBXs with serial number matching 000db9* (Geode CPU)

Note: In case of WMS Network, we recommend to upgrade all the PBXs to the same WMS version

Version 3.88.41762.32 Date: 10.08.2018

Improvement

[WMS-4801] – dev: added provisioning of DSCP QoS parameters for W24FXS 2015

Fixes

[WMS-4822] – sys: fixed an issue with incoming call push notification being still active on Android/ iOS mobile app after a user set “Ring only active device” feature for another device

[WMS-4942] – conf: fixed an issue with occasional screen sharing freezing during videoconferences

[WMS-4976] – sys: fixed an issue with incorrect timezone on W-AIR headsets in case NTP Zone (WMS -> Devices -> “Edit device”) was changed to Europe/Tallinn

[WMS-4988] – sys: fixed an issue with Popup URL configuration after refreshing Collaboration page, when additional backslash symbols “\” were added to the link and it couldn’t be opened


Version 3.88.41711.32 Date: 08.08.2018

New Features

[WMS-4978] – sys: added support for exit code 0 from voicemail allowing caller to speak with an operator

How-to:
Add “operator=yes” to the file voicemail.conf (allows sender to hit 0 before/after/during leaving a voicemail to reach an operator)
Add  ‘0’ called number to the same context (or to another one, if exitcontext is set, as that is where the “0” key sends the caller).

Improvements

[WMS-4740] – app: new version of Fax Printer 2.0.6 increases the max number of pages per fax to 200 (also increased the timeout for fax sending)

[WMS-4858] – sys: changed priority for SMS sending: sms2http is used (configured in WMS Settings -> System -> Fax/SMS Server -> “CURL SMS send”); if it not configured or returns an error, then GSM gateway is used

[WMS-4882] – sys: uncompressed audio files are now used for for Voicemail recognition to improve the quality of Voicemail transcripts with STT (speech-to-text)

Fixes

[WMS-4713] – sys: fixed an issue in which it was impossible to complete semi-attended transfer to call group from collaboration in some cases

[WMS-4854] – sys: fixed an issue with wrong missed call notification for queue member in case call timeout set for this user was less that call group timeout

[WMS-4928] – sys: fixed an issue with PBX sending multiple duplicated billing reports to Fidelio via FIAS hotel integration

[WMS-5004] – sys: fixed an issue in which it was impossible to recover PBXs with CPU Atom D525


Hotfix version 3.88.41708.32 Date 06.08.2018

[WMS-4781] – col: fixed an issue with continuous loading of chat history when scrolling -> This improvement was REMOVED from beta version

[WMS-4987] wms: fixed an issue with redirect to page “reboot” with progress bar after WMS Upgrade


 

Version 3.88.41514.30 Date 26.07.2018

Improvements

[WMS-4761] – sys: increased default flash time of Flash Hook on W24FXS 2015 to 600s

[WMS-4766] – sys: improved the script responsible for disk space optimization

[WMS-4787] – dev: global daylight saving time rules are now used for DST settings on WP phones

[WMS-4788] – sys: from now on all dialplan operations are executed before applying return from blind transfer

[WMS-4792] – dev: from now on PRI gateways use timezone set on device (if not, timezone of the PBX) to make sure correct timestamp is displayed in syslog and time is correctly shown in the interface

[WMS-4793] – dev: improved “Line” Function key’s label for WP 2015-2017; now the label is always static (no running line for long names)

[WMS-4830] – wms: added config parameters “disable_sync_portal” and “disable_sync_manual” to disable devices sync

By default, the sync is enabled. It is necessary to disable it in case of FAILOVER scenario on Failover PBXs!

To disable it: add “disable_sync_portal=1”, “disable_sync_manual=1” to the config file /rw2/etc/pbx/device_sync.conf

Available values: 1 – sync is disabled; 0 – sync is enabled

[WMS-4862] – sys: prefix 058 added to “National” call class for Switzerland to improve call class recognition and for the correct management of ACL permissions

[WMS-4874] – sys: Line keys are now displayed with default label “Line X” instead of “L_X”

[WMS-4901] – dev: increased jitter buffer for WP480G / WP490 2017 models starting from firmware version wp480gr3=63.145.8.71, wp490gr3=67.145.8.37.

The following values were hardcoded:

– Min. delay = 100/ Nominal delay = 200/ Max. delay = 400 – if jitter buffer values are default in WMS -> Settings -> SIP-RTP -> Jitter buffer

– Min. delay = 100/ Nominal delay = 300/ Max. delay = 500 – if max delay > 400 or average delay > 200

[WMS-4930] – sys: “en-us” language is now used for voice recognition for all English speaking countries

[WMS-4949] – dev: increased a ringtone volume on WP480R3/ WP490R3 (Phone Settings -> Audio -> Ring Volume)

 

Fixes

[WMS-4419] – wms: fixed an issue with impossibility to access a device directly from WMS: after pressing “Connect” button, the link couldn’t be opened (regression introduced in WMS version 3.85)

[WMS-4487] – wms: fixed an issue with impossibility to perform backups via email (WMS Settings -> Tools and utilities -> Backup system -> Scheduled backups) in some cases

[WMS-4521] – col: fixed an issue in which a call couldn’t be transferred to a voicemail of the third user using drag&drop

[WMS-4551] – wms: fixed an issue when after the import of users via Active Directory, German language was not set if country code was Switzerland or Austria

Note: logic of importing user preferred language is described in https://confluence.wildix.com/x/pQU8AQ

[WMS-4573] – col: fixed an issue with no ringtone played back after 180 ringing with SDP

[WMS-4597] – wms: fixed an issue when dynamically added Call group member was removed from a Call Group after changing preferences in WMS/ Collaboration

[WMS-4698] – sys: fixed an issue with “en” language sounds played instead of “en-us” if “USA” was set as trunk Country Code

Current limitation: All trunks with “USA” Country Code should be re-saved.

[WMS-4703] – wms: fixed an issue in which it was impossible to import more than 496 contacts from Office 365

[WMS-4707] – wms: fixed an issue in which Remote support didn’t work if HTTP proxy client was enabled

[WMS-4734] – sys: fixed an issue in which PBX engine’s time was not updated after timezone change in
WMS Settings -> PBX -> Language & region

[WMS-4750] – wms: fixed an issue with hotline timeout parameter disappearing from WMS -> Users -> Edit preferences -> Settings after saving

[WMS-4755] – col: fixed an issue with empty “Recents” list in case of poor Internet connection or after PC waking from sleep mode

[WMS-4781] – col: fixed an issue with continuous loading of chat history when scrolling

[WMS-4785] – col: fixed an issue when it was impossible to make a call to a number without a country code from some integrations since an external line prefix wasn’t added to a number

Note: integrations that use the following library were affected: https://github.com/Wildix/IntegrationService

[WMS-4791] – wms: fixed an issue with impossibility to save configuration of “Play sound” Dialplan application containing apostrophe (‘) in text (TTS) after WMS upgrade

[WMS-4800] – wms: fixed an issue with setting / updating of PBX geolocation

[WMS-4806] – sys: fixed an issue with replication script hanging on Failover setup in some cases

[WMS-4811] – sys: fixed an issue with PBX engine hanging during recreation of SQLite3 astdb backend in case it was corrupted or empty

[WMS-4842] – sys: fixed an issue with TAPI Firstel integration not working after upgrade to WMS version 3.88.41047.25 due to incorrect Call ID after a call was redirected to Agent Station

[WMS-4843] – sys: fixed an issue with wrong voice prompt when calling user in DND due to TTS file generation instead of playing pre-recorded audio file

[WMS-4869] – wms: fixed an issue with no audio and call drop after 32 seconds on Cloud PBX after upgrade to WMS 3.88.41067 for calls made from Android/ iOS mobile app to Collaboration

[WMS-4889] – sys: fixed an issue with Web phone not appearing in device selection list of Collaboration in some cases

[WMS-4914] – sys: fixed an issue with possible PBX engine deadlock in Failover scenario


 

Hotfix date 28.06.2018

Provisioning package 1.0.88.41215:

[WMS-4765] – sys: fixed an issue in which it was impossible to load call history on WP4X0 after release 3.88.41148.25 (last beta version)


 

Update repository: rel380beta

Version: 3.88.41148.25 Date: 26.06.2018

Improvements
[WMS-4240] – col: increased limit of monitored users in Collaboration to 600

Fixes
[WMS-4445] – wms: wideband codec option, if enabled in SIP-RTP menu, is no longer disabled automatically after each PBX upgrade
[WMS-4689] – col: fixed wrong voicemail notification in some cases when users dials one’s office number
[WMS-4711] – sys: fixed a rare issue with extended Latin symbols not encoded in UTF8 could create issues with accessing phonebook / history on WP4X0
[WMS-4731] – sys: fixed an issue with feature codes not working in case the sound package for the language selected by user was not installed


Version 3.88.41047.25 Date: 22.06.2018

[WMS-4737] – col: fixed a problem with Google maps access from Collaboration


Packages: Dialplan 1.0.88.41070, LUA-base 1.0.88.41070 Date: 19.06.2018

[WMS-4726] – sys: fixed an issue with provisioning of new devices not working starting from provisioning package ver. 1.0.88.41086


Provisioning package 1.0.88.41086 Date: 18.06.2018

[WMS-4708] – dev: fixed an issue with random call drops and loss of SIP registration on a local W-AIR base connected via UDP (base station’s LED was blinking red in such cases)


Version 3.88.41047.24 Date: 14.06.2018

New Feature

[WMS-4572] – wms: added support for “Cid Name via Facility IE” (previously “Additional services”) feature in BRI/PRI trunk settings, that enables calling name delivery for US and Canada

Improvements

[WMS-4503] – sys: decreased a number of requests to WBI service (license is now checked at PBX level)
[WMS-4618] – dev: option “Correct incoming calling numbers” on BRI/PRI trunk settings page (WMS -> Trunks -> BRI/PRI) is now longer applied for trunks with the USA country code: 0/ 00 are not added to national/ international incoming calls
[WMS-4653] – sys: option “Auto add new devices in local networks” (WMS Settings -> PBX -> SIP-RTP) is now enabled for 2 hours after which it is automatically disabled
[WMS-4654] – wms: removed option “Require provisioning password in local networks” from SIP-RTP page; now authorization is always required

Fixes

[WMS-4367] – col: fixed an issue with CDR-View exporting xls/ csv files containing “NaN” values instead of numbers and impossibility to open xls via Microsoft excel
[WMS-4420] – sys: fixed an issue when it was impossible to answer a video call from 2N door phone on web phone with Chrome version 67 (stable) on Mac OS and 67 (stable)/ 68 (beta) on Windows
[WMS-4507] – sys: fixed an issue with call tags set up via Dialplan not displaying in CDR-View in case a call was placed to a Call group and then transferred with attended transfer
[WMS-4647] – wms: fixed an issue in which remote support didn’t work in some cases when using HTTP proxy client
[WMS-4691] – dev: fixed an issue with PBX hanging up calls after some time on some W-AIR bases


Version 3.88.40902.23 Date 06.06.2018

New Feature

[WMS-4589] – sys: added support for normalization of caller ID for incoming calls from trunk with USA country code

  • 11 digits or more, with first digit that is different from 1: if starts with 011, 011 is removed and replaced with + or otherwise + is added
  • 11 digits starting with 1: + is added in front
  • 10 digits: +1 is added in front

Improvement

[WMS-4566] – sys: improved quality of voicemail transcription using Speech to Text (STT) service

Fixes

[WMS-4614] – col: fixed an issue in which voicemail notifications displayed wrong number of voicemail messages in Collaboration and WP in some cases
[WMS-4631] – sys: fixed an issue with devices failover by DNS not working in case Cloud PBX was used as Main PBX


Version 3.88.40857.23 Date 04.06.2018

Improvement

[WMS-4617] – dev: the volume of the microphone in handsfree mode has been tuned for WP480G/WP490G 2017

Fixes

[WMS-4376] – col: fixed an issue in which hyperlinks containing “<…>” characters were not displayed correctly in chat and were not clickable
[WMS-4563] – sys: fixed an issue in which Call group members that changed DND statuses back to Available, could receive a call not earlier than the timeout set for the Call group was reached

Notes:

  • “Unavailable on away / dnd” option must be disabled (Collaboration -> Settings -> Contact center)
  • Works only for “Call All 10” Strategy

[WMS-4596] – sys: fixed an issue with Dialplan application “Play sound” generating a TTS message instead of playing the selected ringtone (even if the audio file was present in the Sounds directory)
[WMS-4634] – sys: fixed an issue with a partial playback of welcome message when calling via Dialplan application “Dial by name/ Directory” or Feature code “Directory” 82 in case dial by name using ASR feature was unavailable (introduced in WMS-4508) due to license restrictions


Version 3.88.40828.22 Date: 31.05.2018
HOTFIX [WMS-4612] – col: fixed high CPU load when accessing Collaboration via Chrome 67 on macOS (fixed regression after release 3.88.40804.22)


Version 3.88.40804.22 Date 31.05.2018

Improvements

[WMS-4583] – sys: added global Dialplan variable “FILTER_183180nosdp” to solve no ringback issue with some UK VoIP Operators
Dialplan variable can be also used in Dialplan before “Dial the trunk” application: add “Custom application” and enter into the field: Set(FILTER_183180nosdp=1)

Fixes

[WMS-4356] – col: fixed an issue in which it was possible to view/pick up user’s call via a Function key even in case it was was forbidden by ACLs “cannot” – “View calls of users” and “cannot” – “Call Pickup”
[WMS-4587] – wms: fixed an issue with no ringback tone for calls from trunk to trunk (calls from and to TDM network) with Swisscom operator sending 183 session progress
[WMS-4606] – sys: fixed an issue with SIP Proxy removing q-value parameter from custom register string (added in WMS-4488)
[WMS-4610] – sys: fixed an issue with personal data rotation not deleting the data evenly for all users
[WMS-4612] – col: fixed high CPU load when accessing Collaboration via Chrome 67 on macOS


Version 3.88.40753.22 Date 30.05.2018

Improvements

[WMS-4508] – sys: added support for dial by name using ASR (Automatic speech recognition) BETA version
Feature is available only for:

  • Per user systems (feature not available for lifetime PBXs) with Premium license
  • “en” or “en-us” languages

It can be called via “Dial by name/ Directory” Dialplan application or Feature code “Directory” 82.
Available also for W-AIR Headset (press the Call button when there is no active conversation and say the name).
Feature is enabled by default. To return to the old behavior (entering name via DTMF), use these global Dialplan variables:

  • IVR_ASR (yes / no, default = yes) for Dialplan application
  • IVR_ASR_SERVICES (yes / no, default = yes) for Feature code

Fixes

[WMS-4501] – app: fixed an issue with occasional screen sharing freezing on high resolution display on macOS
[WMS-4502] – col: fixed incorrect sequence of chats in “Recents” upon the first login in incognito mode
[WMS-4579] – sys: fixed an issue with no free space on PBX after some time in case Failover scenario was configured
[WMS-4602] – sys: fixed an issue with call history not displaying on WP phones in case MSSQL instance was used as CDR backend
Note: This version also fixes an issue in which after switching to MSSQL Database it was impossible to use Web phone and users’ pictures and calls in Call history were flashing in browser window [OTRS 2018052310000253]

Firmware

[WMS-4556] – dev: new FW 59.145.6.144 for WP490G 2017 fixes an issue in which phone could not receive IP address from DHCP server in case of using tagged VLAN


Version 3.88.40689.21 Date 23.05.2018

Feature

[WMS-4488] – sys: added support for q-value (serial forking) parameter via custom register string
How to:
– Copy registration line for some trunk from /etc/callweaver/sip-registration.conf (Example: register => 144?144:123456:”144″@10.168.0.144:5060)
– Uncheck “Enable registration” option in Trunk Settings (WMS -> Trunks)
– Add new line into /etc/callweaver/sip-general-custom.conf
register => 144?144:123456:”144″@10.168.0.144:5060~~0.6 (where 0.6 is q-value)
– Run callweaver -rx “sip reload”

Improvements

[WMS-4435] – wms: improved domain whitelist support: now it is possible to add patterns using asterisk symbol (*) that replaces letters, numbers, and dashes
Examples: https://*.wildixin.com; *://*.wildixin.com; https://*.*.wildixin.com

[WMS-4491] – app: decreased delay for mobile apps chat push notifications to 30 seconds

Fixes

[WMS-4373] – col: fixed an issue with impossibility to send HTML <script> tag via Collaboration chat message
[WMS-4489] – col: fixed an issue with infinite loading of chat history if PBX user received a new message from Kite user
[WMS-4504] – sys: fixed an issue with impossibility to playback a message via TTS Dialplan application (Play sound/ Play sound and wait for digits) in case the message contained apostrophe symbol
[WMS-4520] – wms: fixed an issue when it was impossible to log in Collaboration in Firefox browser in case custom external secure port was different from 443
[WMS-4513] – sys: fixed an issue with impossibility to save user’s preferences (WMS -> Users -> “Edit preferences”) in case predefined status message contained square brackets
[WMS-4535] – sys: fixed an issue with impossibility to execute sync_pbx failover script under admin rights


Version 3.88.40477.20 Date: 14.05.2018

Improvement

[WMS-4370] – sys: DNS server via firewall is now disabled by default (DNS queries from public IP and non-private networks will be blocked)
Limitation: PBX cannot be used as DNS server from remote network

Fixes

[WMS-4055] – sys: fixed one way audio issue when switching active device from Web to Android Mobile app using Continuity in case devices were located in the different networks
[WMS-4437] – wms: domain names containing hyphen symbol are now accepted in domain whitelist under Security tab
[WMS-4500] – sys: fixed an issue with PRI gateways not working with some US VoIP operators because default status codes were limited to 1-126 instead of 1-127


Date: 11.05.2018

[WMS-4495] – sys: fixed an issue with slow in handling of calls using WP4X0(G) in case of many incoming SIP notifies (e.g. over 30 BLF keys configured)
Note: WP firmwares were rolled back to the latest unaffected version; the following features from WMS-4395 were rolled back:

  • Fixed the multicast-paging issues: now phones send only packets with audio
  • Improved the procedure of registrations and subscriptions (BLF, statuses, VM notifications) in the failover scenario

Version 3.88.40417.19 Date: 09.05.2018

Feature

[WMS-4375]- dev: username is now displayed next to the extension number label on WP2015-2017 (the top part of the screen)
Note: To show only the extension number (old behavior), use a provisioning parameter “DisableShowUsername”, check documentation for details: https://confluence.wildix.com/x/KQg8AQ

Fixes

[WMS-4162] – fixed an issue with call being rejected in some rare cases when it was placed to a user with Mobility via SIP trunk with configured CID Header “P-asserted-Identity”/ “P-Preferred-Identity” in SIP Trunk Settings nder certain circumstances

[WMS-4331] – sys: fixed an issue with diacritics (accented characters and umlauts) not being displayed correctly in email notifications about new chat messages

[WMS-4389] – sys: fixed an issue with impossibility to verify some SSL certificates using cURL parameters in Dialplan -> “Custom application”

[WMS-4443] – col: fixed an issue with impossibility to export charts from CDR-View (issue present both in WMS 3.88 and 3.87)

[WMS-4486] app: fixed an issue with screen sharing not starting with 2 displays (not mirrored) on macOS (released new version of Screen Sharing component)


SIP Proxy package 5.0.3.88.40360 Date 06.05.2018

[WMS-4459] – sys: fixed an issue with impossibility to select device in devices list in case of high number of push devices and small cloud instance


Version 3.88.40347.18 Date 03.05.2018

Fixes

[WMS-4259] – wms: fixed an issue when it was impossible to set netmask for gateways using /31-bit prefixes on IPv4 Links (WMS -> Settings -> System -> Network -> Routing and gateways)
[WMS-4390] – sys: fixed an issue in which a Timetable created for a specific year continued to work after that year has finished (the value in the field “year” was automatically changing to “any” on January 1)
[WMS-4393] – sys: fixed an issue with Feature Codes not working in case users had popup URL with specific configuration (double quotes)


Version 3.88.40314.18 Date 02.05.2018

Features

[WMS-4377] – col: added ability to select the application to share via screen sharing on Windows
[WMS-4400] – col: added ability to select the application to share via screen sharing on macOS

How-to:

  • Update screen sharing component from Collaboration Settings -> Extensions
  • Start a screen sharing session
  • From the menu bar, click on Screen Sharing Manager -> Applications and select which application to share

Improvements

[WMS-4288] – wms: improvement for processing WebAPI requests

[WMS-4362] – sys: TTS services (TTS Lite, Dynamic TTS in Dialplan, user status reporting via TTS) are now available also on Hardware and Virtual PBXs Per User PBXs with Premium license (with Monthly / Yearly / Five year subscription)
Documentation has been updated: https://confluence.wildix.com/x/3QM8AQ

Fixes

[WMS-4254] – sys: fixed an issue when after changing music on hold class in WMS -> Settings -> PBX -> SIP-RTP -> “Default music on hold”, PBX engine continued to use the previous class settings until it was restarted
[WMS-4260] – fixed an issue when after semi-attended transfer call from Collaboration to Call Group with “Call All 10” strategy was answered by a target agent, a transferee was still on hold and other Call Group members had incoming call
[WMS-4398] – kite: fixed an issue with incorrect presence status of remote users in WMS Network in some cases
[WMS-4432] – col: fixed an issue in which a new incoming message in “Recents” was no longer highlighted in case a user who has received the message but not read it yet, started a new chat session with another colleague from roster via mobile app


Version 3.88.40206.17 Date: 23.04.2018

Feature

[WMS-4327] – wms: added status icon for Vision Android device if it is assigned to a user (WMS -> Users)

Improvement

[WMS-4291] – col: improved loading of chats from “Recents” section
Now chats from “Recents” section are also stored in browser cache besides being stored in the PBX DB which helps reduce time needed for loading

Fixes

[WMS-4336] – sys: fixed an issue with email report on the status of SMS sent over HTTP containing Chinese characters in the message body
[WMS-4337] – col: fixed an issue in which certain files containing spaces and digits in their names were sent over chat as HTML text and thus could not be opened

Firmware

[WMS-4395] – dev: new firmware for WP410 2015 – 50.145.6.148, WP480(G) 2015 – 55.145.6.99, WP490(G) 2015 – 59.145.6.138, WP480G 2017 – 63.145.8.36, WP490G 2017 – 67.145.8.11

    All models:

  • Fixed the multicast-paging issues: now phones send only packets with audio
  • Improved the procedure of registrations and subscriptions (BLF, statuses, VM notifications) in the failover scenario

WP480GR3 and WP490GR3:

  • Fixed an issue with one-way audio
  • Fixed an issue when the ringtone was followed by clicks

Callweaver package 0.88.40149-5 Provisioning package 1.0.88.40156
Date: 18.04.2018

Fixes

[WMS-4371] – sys: fixed call drop issue in case of receiving 15 simultaneous calls via SIP trunk in Call Group with strategy “Call All 32”

[WMS-4387] – dev: fixed an issue when WP480G-490G phones were unavailable to make outgoing calls due to failed Database update after check sync in case Failover scenario was configured (issue was present both in WMS 3.88 and 3.87)


Version 3.88.40135.16 Date: 17.04.2018

Feature

[WMS-3985] – wms: added option to support domain whitelist which helps to protect PBX from cross-site request forgery (CSRF) attacks (WMS -> Settings -> PBX -> Security)
IMPORTANT: Trusted domains must be added to domain whitelist! Please note that any Web API / PBX API integration will stop working if the domain is not added; Detailed documentation is coming the next week

Fixes

[WMS-4343] – col: fixed an issue in which chats with users disappeared from the “Recents” section in some cases

[WMS-4319] – wms: fixed an issue when auto upgrade and reboot of all the devices wasn’t performed after PBX upgrade
Note: This feature was added in WMS-3719

[WMS-4297] – sys: fixed an issue causing delay of trunk calls in case of network problems with external lookup service enabled (no internet connection, unavailable DNS server etc)

[WMS-4312] – sys: fixed an issue with jitterbuffer causing high CPU usage in some cases after WMS Beta ver. 3.88.39862.04
Note: Due to the fix, the feature that improves quality of calls in case of jitter was enabled again (ticket WMS-3420)

[WMS-4272] – sys: fixed an issue with W24FXS Media Gateway losing SIP registration in case Failover scenario was configured


Version 3.88.40049.14 Date: 10.04.2018

Improvements

[WMS-4168] – wms: added option to assign unprovisioned devices to users
note: available only for devices added via Remote Provisioning (Semi-automatic mode) or WMP
[WMS-4242] – wms: improved support of Spanish accented letters (á, í, ó, ú, ñ, ü, ¿, ¡,) in phonebook on W-AIR Handset
[WMS-4264] – wms: improved option to auto-delete old voicemails/recordings after release 3.88.39485.09 in case of applying backup
limitation: in case of applying backup, empty icons for Call recordings and Voicemails that had been deleted, are still present in CDR-View (also on History page for call recordings)
[WMS-4360] dev: re-enabled the feature “blinking state of Colleague BLF when the monitored user is in conversation + is receiving an incoming call” on WP4X0 2015-2017
Colleague BLFs blink in case the monitored colleague who is already in conversation is receiving a second incoming call

Fixes
[WMS-4133] – sys: fixed an issue with voice prompts played partially using some Feature Codes on WP4X0 phones
note: issue was present with the following firmware: WP480gr2 – 55.145.6.92, wp490gr2 – 59.145.6.133, wp480gr3 – 63.145.7.236-238, wp490gr3 – 67.145.7.109 and was fixed in WMS-4282
[WMS-4305] – wms: fixed an issue when it was impossible to sent curl SMS using a third-party service or another PBX
limitation: if admin hardcodes some curl parameter e.g. “message” then user receives an SMS with hardcoded text, but email contains text from Collaboration SMS dialog
[WMS-4306] – col: fixed an issue with chat database connectivity when it is configured as a cluster
[WMS-4311] – sys: fixed an issue when W-AIR Headset couldn’t get a pairing code in case Dialplan context “login-emergency” contained “pbxinternal” in Included procedures
Note: ”pbxinternal” has been removed from Included procedures for “login-emergency” context; in case users need to call other extensions without device registration, administrator must add
corresponding extensions/templates to “login-emergency” manually

Firmware

[WMS-4282] – dev: new firmware for wp410r2 – 50.145.6.147, wp480gr2 – 55.145.6.98, wp490gr2 – 59.145.6.137, wp480gr3 – 63.145.8.28, wp490gr3 – 67.145.8.6

All models:

  • Improved DHCP and NTP synchronization
  • Added support of IEEE 802.1x Standard
  • When “Menu” soft-key is hidden (ACL rule) – the user will not be able to change the volume of the ringtone

WP480GR3 and WP490GR3: A new audio SDK was configured and applied, the following problems were solved after applying the new audio SDK:

  • Improved echo cancellation
  • Improved jitter buffer
  • Fixed an issue when during a conversation in the “handset” mode, user could hear a short sound after putting the handset back on the hook

Version 3.88.39970.13 Date: 30.03.2018

Feature

[WMS-3987]- wms: added option to enable remote syslog in addition to local syslog (WMS ->Settings -> System -> Remote syslog)
Detailed documentation is coming the next week

Improvement

[WMS-4275] – sys: removed underscores used instead of spaces on WP4X0 2015-2017 for BLF keys “Colleague”/ “Speed Dial”/ “Park Location”/ “Send DTMF”


Callweaver package 0.88.39981-5 Provisioning package 1.0.88.39988 Date 29.03.2018

Features

[WMS-3420] – sys: improved quality of calls in case of jitter -> FEATURE TEMPORARILY DISABLED due to high CPU usage in some cases
[WMS-4308] – sys: added a provisioning parameter “EnableMWISubscribe” to enable voicemail LED notifications on W24FXS 2015 in provision.conf
the parameter is disabled by default. Documentation: https://confluence.wildix.com/x/KQg8AQ

Fix

[WMS-4267] – sys: fixed an issue with wrong call distribution in call groups using the strategy “Fewest Calls” when not all group members received calls


Version 3.88.39946.04 Date: 27.03.2018

Improvements

[WMS-4293] – col: improved chat history processing
this improvement minimizes the risk to lose a chat message due to connection / disconnection

[WMS-4295] – sys: added SIP Proxy logging for GDPR compliance (information about new SIP registrations is now logged with default debug level)

Fixes

[WMS-4229] – sys: fixed an issue with muted incoming audio from 2N door phone on web phone with Chrome version 64.0.3282.186
[WMS-4262] – sys: fixed an issue with feature codes “make up room” and “remove alarm clock” not working starting from WMS release 3.87.38290.52


Hotfix Version 3.88.39925.04 Date: 27.03.2018

[WMS-4265] – col: fixed an issue in which it was not possible to view more than 100 phonebooks in Collaboration (issue present both in WMS 3.88 and 3.87)
[WMS-4266] – wms: fixed an issue with impossibility to download audio files from Sounds menu if access to WMS was made via WMP (issue present both in WMS 3.88 and 3.87)


Callweaver hotfix package 0.88.39891-5 Date: 23.03.2018

[WMS-4274] – sys: G729 transcoding (added in WMS-3458) automatically disabled for old PBXs to prevent an issue with PBX engine not starting on old PBXs


Version 3.88.39862.04 Date 22.03.2018

Features

[WMS-3420] – sys: improved quality of calls in case of jitter
Jitter Buffer is now enabled by default on the PBX side (callweaver works as jitter buffer) which allows to improve overall quality for SIP trunks calls, voicemails and call recordings
[WMS-3458] – sys: added support for transcoding for web phone calls to trunks which do not support G711
Notes:

  • It’s not recommended to enable this feature, as it reduces call quality and generates useless load on CPU
  • It must be enabled only if the operator doesn’t support g711a/u for some calls
  • It can generate CPU overload and problems if too many calls use it; in this case it is recommended to use another operator which supports all the needed codecs ( g711a / g711u / g729)
  • Feature is supported only on PBXs with modern CPU or Cloud
  • To enable g729 transcoding, edit the file /etc/callweaver/sip-general-custom.conf:
    [general]
    g729_transcoding=yes

[WMS-3514] – wms: support of SMS sending via HTTP without GSM gateway
Added new parameters to Fax/SMS server page in WMS allowing you to enable CURL SMS sending; click the question mark below the field to view the prompt and parameters which can be passed; feature works for scenarios in which no GSM gateway is registered

[WMS-3900] – wms: added support for random playback of music on hold (new parameter added to SIP-RTP page)

[WMS-3901] – wms: added phonebook ID and the possibility to delete all contacts from the phonebook in WMS -> Users -> Phonebooks

[WMS-4084] – wms: added option to auto-delete old chats (new parameter added to Call and chat history page)

[WMS-4090] – wms: added option to auto-delete old voicemails/recordings (new parameter added to Call and chat history page)

[WMS-4144] – wms: added a new ACL – cannot/can use extensions in Collaboration (Collaboration -> Settings -> Extensions)

Improvements

[WMS-3855] – wms: improvements of speed and reliability of devices scan performed during automatic provisioning

[WMS-3867] – col: visual and graphical improvements of video call dialog

[WMS-3883] – col: fixed an issue in which links containing HTML entities, when pasted in chat were not clickable

[WMS-3905] – wms: speeded up saving of large dialplan procedures

[WMS-3908] – wms: dialplan debug is now always active

[WMS-3909] – sys: user busy / unavailable Voicemail greeting is now played instead of a standard one if present

[WMS-3980] – sys: Ruben is now used as default voice for NL in TTS dialplan application (Play sound / Play sound and wait for digits)

[WMS-3981] – sys: it is now possible to set voice via variable for TTS dialplan application (Play sound / Play sound and wait for digits)
“Set” – TEXTTOSPEECH_VOICE (enter this value manually into the input field) – Lotte (or any other voice present in Sounds menu -> Text-to-speech); Documentation: https://confluence.wildix.com/display/DOC/Dialplan+applications+Admin+Guide+-+English#DialplanapplicationsAdminGuide-English-Playsound

[WMS-3984] – wms: added secure parameters in cookies to prevent them from being transferred over HTTP

[WMS-3986] – wms: logins / logouts are now written to syslog (remote IP, port, username, auth method, login / logout – all this info is now written to syslog)

[WMS-4175] – sys: “followed by the pound” has been added to welcome message of Dial by name feature

[WMS-4176] – dev: it is now possible to set static DNS servers in WMS -> Devices for WP 4X0 2015-2017 without static IP

[WMS-4198] – col: graphical improvements of chat transcript dialog

[WMS-4208] – wms: PBXs in WMS Network are now referred to as Server / Clients (changed verbiage)

[WMS-4209] – col: improved live search in case user enters two words into the live search field (e.g. Name and Surname or Name and a part of Surname)

[WMS-4234] – sys: fixed call drops under high load with remote called id lookup service was active

Fixes

[WMS-3439] – col : fixed an issue with unknown names in history of notes that could appear in case contact was deleted
[WMS-3882] – col: fixed an issue in which users which were selected in Edit Colleagues menu remained selected after they were removed from Roster
[WMS-3884] – wms: fixed an issue in which user could log in to Collaboration using Office 365 / Google sign-on even if the option “allow only single sign on” for AD / Domino was enabled
If the option “Allow only single sign on” is enabled, users can log in only using their Lotus Domino / Active Directory password
[WMS-3890] – sys: fixed an issue with “Call and chat history” menu displaying a blank page in case of missing permissions to create table using MSSQL database
[WMS-3895] – sys: virtual / Cloud PBX becomes unreachable after recovery procedure applied in Console menu starting from WMS 3.86; Important: do not perform Recovery Procedure on Virtual / Cloud systems on WMS 3.86 – 3.87; in WMS 3.88 possibility to run Recovery procedure on Virtual / Cloud systems has been blocked!
[WMS-3906] – col: fixed an issue with files sent via chat were shown immediately as read
[WMS-3916] – sys: one way audio after switching active device from web to WP using Continuity during a call between users who enabled direct-rtp in Collaboration on Windows PC
[WMS-3934] – col: fixed an issue in which multiple links to download call recording were generated in CDRview for calls to queue recorded via Dialplan (using “Record call” and “Call group” dialplan applications)
[WMS-3946] – wms: fixed an issue in which ACL – cannot access menu – Users: PBXs restricted a user from being able to perform search Users Menu
[WMS-3959] – wms: fixed an issue with reason field of “Hangup” dialplan rule getting unselected after PBX reboot
[WMS-4028] – col: fixed an issue with duplicated devices under Continuity option in Collaboration call dialog
[WMS-4036] – col: fixed an issue in which it was impossible to call numbers copied from macOS contacts into Collaboration
[WMS-4043] – wms: fixed an issue with impossibility to access menu Call and chat history due to an incorrect symbol added in global variables in Dialplan General settings
[WMS-4045] – col: fixed an issue with loader displayed forever in live search after starting to enter a part of the name
[WMS-4047] – col: fixed an issue in which it was impossible to scroll down to the beginning of the chat in some rare cases when image preview were present in chat conversation
[WMS-4049] – col: fixed an issue with call history not displaying caller name set via dialplan if contact was not found in a phonebook since 3.87
[WMS-4078] – wms: fixed an issue with basic authorization window displayed (instead of redirection to Login page) on trunks/devices/ports pages in case user lost session
[WMS-4085] – сol: password change and saving issues
Fixed an issue in which it was impossible to change password on Firefox and other minor fixes
[WMS-4086] – sys: fixed an issue with Forced Call forward (Call forward All) feature status not updated on phone screen after it was changed in user preferences via WMS
[WMS-4087] – sys: fixed a crash of ejabberd in case member with invalid extension was added to call group
[WMS-4110] – col: fixed an issue with Popup URL losing tag information in Safari in case of call pickup (in case Popup URL was enabled for outgoing calls on “Call generation”)
[WMS-4114] – col: fixed an issue in which user couldn’t log in to Collaboration in case trying to log in via HTTP after first login via HTTPS
User was redirected to login page after entering correct login and password; from now on user is prompted to login via HTTPS
[WMS-4143] – wms: fixed incorrect link to PBX in the welcome email in case custom secure port was different from 443
[WMS-4160] – sys: fixed an issue with incorrect RTP ports range after reset of Cloud PBX to factory settings
[WMS-4163] – wms: fixed an issue in which it was impossible to save SIP-RTP settings if access to WMS was made via WMP
[WMS-4173] – sys: fixed an issue in which it was impossible to view calls in call history of Collaboration using MSSQL with instance as CDR backend
Documentation: https://confluence.wildix.com/display/DOC/WMS+Settings+Menu+Admin+Guide+-+English#WMSSettingsMenuAdminGuide-English-Callandchathistory
[WMS-4178] – col: fixed an issue in which calls through external SIP carrier that sent 183 (session progress) and 180 (ringing) generated two ringing tones via web phone
[WMS-4196] – col: fixed an issue in which video conference invite messages remained unread for the system in case user was logged in via Mobile app
Fixed a behavior with invite messages from Kite user / video conference which were read by user via Collaboration were still sent by email / via Push notification
[WMS-4203] – wms: fixed an issue in which remote support couldn’t be reloaded in case HTTP proxy client was enabled
[WMS-4212] – col: fixed an issue in which in some cases users statuses did not change from busy to available in WMS network in case “admin” user did not have an extension
[WMS-4224] – col: fixed an issue in which ACL rule “cannot set” – personal information” prevented user from being able to change user status starting from WMS verison 3.87.39381.52
ACL rule “cannot set” – “personal information” doesn’t allow user to change personal information in Collaboration Settings – Personal (the tab is hidden), but allows changing user status
[WMS-4228] – sys: fixed an issue with some sounds in NL package not being found (when calling Voicemail) due to wrong file names
[WMS-4236] – col: fixed an issue in which it was impossible to answer incoming call from pop-up window if access to Collaboration was performed using URL link in the old format (/cticonnect)
In case access is performed via the link in format /cticonnect – added auto redirect to /collaboration
[WMS-4244] – sys: fixed an issue with fast navigation in phonebook on WP4X0 2015-2017 by pressing the numpad-keys not working in case there was no record beginning with the 1st letter on the num-key (issue introduced in WMS version 3.87)
[WMS-4257] – col: fixed one way video issue in case video was initiated by the client whose phone does not support video (regression, issue was fixed in WMS version 3.85 with WMS-2731)

Firmware

[WMS-3778] – dev: firmware for W-PA
Documentation: https://confluence.wildix.com/x/BQAVAQ

[WMS-3954] – dev: new firmware for GSM gateway – it is now possible to send SMS in case PBX domain name contains up to 31 symbols (previously it was limited to 30 symbols)

[WMS-4250] – dev: new firmware for W-AIR system version 04.10.00.03

  • Fixed: “Man down” alarm stops working after some time; + additional fixes for “Man down” alarm
  • Fixed: calls are not possible after Ethernet has been disconnected / connected several times
  • Fixed: pressing Headset off hook / on hook button ends the 1st call instead of the 2nd call
  • Repeaters can now be registered even if Access code is different from default 0000
  • Fixed missing audio after upgrade to version 04.00.00.02 in case of using VLAN + direct RTP
  • Improved DECT tree algorithm
  • Fixed: incorrect logs on the side of the called party in case called party rejected the call
  • Fixed: no SIP registration after Ethernet has been disconnected / connected on W-AIR Small Business

Version 3.87.39810.52 Date: 19.03.2018

Fixes

[WMS-4214] – col: fixed wrong format of date during search in call history using MSSQL backend starting from WMS version 3.87.39529.52
[WMS-4241] – col: fixed an issue with Collaboration not receiving the list of user features after changing the password from Collaboration
[WMS-4248] dev: new firmware for W24FXSR 2015 version 27.18.01.15
fixed an issue in which device’s model was displayed incorrectly in WMS after one of FXS ports went down


Callweaver package 0.87.39784-5 SIP Proxy package 5.0.3.87.39764 Date: 14.03.2018

Fixes:

[WMS-3764] – sys: fixed an issue with incorrect semi-attended transfer made by web phone user to user with mobility
[WMS-4183] – sys: fixed a rare issue in which calls were not terminated correctly, which could lead to PBX not being able to receive more calls after upgrade to WMS version 3.87.39178.52
[WMS-4097] – sys: fixed a rare issue with PBX engine restart when using call group strategy “Call all: 32” with WMS version 3.87.39178.52


Provisioning package 1.0.87.39636 Date: 06.03.2018

[WMS-4185] – sys: fixed an issue with W24FXS 2015 unable to connect to PBX when in Failover mode in some cases


SIP Proxy V. 5.0.3.87.39601 Date: 02.03.2018

[WMS-4127] – sys: fixed a rare issue in which 2nd incoming call was not delivered to mobile apps in case first call via push was canceled after several seconds
[WMS-4193] – sys: fixed an issue in which PRI gateway could stop working correctly (impossible to place outgoing calls; incoming calls with one way audio) when in failover mode after a temporary connection interruption


Version 3.87.39529.52 Date: 28.02.2018

[WMS-3933] – sys: fixed an issue with remote W01-2FXS unable to make SIP registration on Cloud PBXs, introduced starting from WMS release 3.86
[WMS-4174] – sys: fixed an issue with call interruptions on local PRI gateway with non-standard network address after upgrade to stable release 3.87.39381.52

Callweaver v. 0.87.39450-5 Date: 27.02.2018

[WMS-4121] – sys: additional fix for rare incorrect BLF state (off) for a user who was in conversation for a long time (more than 5-10 minutes)


Version 3.87.39464.52 Date: 26.02.2018

Fixes

[WMS-4132] – sys: fixed an issue with queue member changing status from available to away in some cases after terminating a call on a call group
[WMS-4148] – col: fixed an issue with downloading images from chat on Chrome 65 beta

Other (not related to WMS version and already available in stable):

[WMS-3889] – conf: added an option to receive audio only or one video stream only, to save bandwidth


Callweaver v. 0.87.39415 Date: 22.02.2018

[WMS-4122] – sys: fixed an issue with incorrect BLF states in case SIP reload occurred during an ongoing call (e.g. trunk settings were re-saved or PBX external IP was changed) and then the call was put on hold and resumed


WMS Hotfix version 3.87.39381.52 Date: 21.02.2018

Fixes
[WMS-4014] – sys: fixed an issue with playback of sound files in case sound folder name contained space, starting from WMS release 3.87
[WMS-4123] – wms: fixed an issue with missing caller name information in mail subject of missed call email notifications, starting from WMS release 3.87

Other (not related to WMS version)
[WMS-3937] – conf: fixed an issue in which the picture of participant without video was not shown on main screen


WMS Hotfix version 3.87.39330.52 Date: 20.02.2018
[WMS-3965] – col: fixed an issue with tag information disappearing from Popup URL in case of call pickup
[WMS-4121] – sys: fixed incorrect BLF state of user who completed attended transfer of incoming call from trunk
[WMS-4124] – sys: added support for Android mobile app connected over T-Mobile 4G network


WMS Hotfix version 3.87.39309.52 Date: 19.02.2018

Improvement
[WMS-4092] – sys: added the possibility to disable silent ringtone for the second incoming call
Added the possibility to disable silent ringtone for the second incoming call via global Dialplan variable CW_SILENT_RINGTONE=no (default value is set to “yes”)

Fixes

[WMS-4054] – sys: fixed an issue with VIA-based HW PBXs being unable to initialize storage USB drive from scratch starting from WMS release 3.87
[WMS-4058] – sys: fixed an issue with BLF keys displaying wrong user status in case a queue call arrived from number that matched the office number of user
[WMS-4094] – wms: fixed an issue with DHCP server page
[WMS-4095] – sys: fixed incorrect BLF state in case of caller name was longer than 69 symbols
[WMS-4116] – col: fixed problems with Google Map

Other – these tickets don’t depend on WMS version and are available in stable

[WMS-4074] – kite: it is now allowed to send files only in JPEG / PDF format
[WMS-4075] – kite: it is now possible to allow chat & screen sharing only after PBX user sends a message
How to: add the option “?waitMessageFromOperator” to the URL, example of the URL: “https://kite.wildix.com/ucit/324?waitMessageFromOperator”, in this case Kite user can send a message, start a call and screen sharing, only after the PBX user sends the first message
The following values are supported by the parameter:

  • call
  • screensharing
  • chat

You can specify several values separated by comma, example: “https://kite.wildix.com/ucit/324?waitMessageFromOperator=chat,screensharing”


WMS Hotfix version 3.87.39178.52 Date 13.02.2018

[WMS-3838] – wms: fixed an issue with chat history and sync not working in case MySQL was used as backend for Chat history with port different from 3306, starting from WMS version 3.86.37657.41


WMS Hotfix version 3.87.39164.52 Date 13.02.2018

Improvement
[WMS-4080] – col: status message set for a Custom status in Collaboration Settings -> Chat / Presence is now visible for other users of the system
How to use custom statuses? Example:

  • add a new Custom status “away” with message “lunch” and status duration “0 h 45 min” in Collaboration Settings -> Chat / Presence
  • click on your user status and select this status message under “away” (lunch – 45 min.)
  • other users of the system can now see that your user status is “away” for 45 minutes and “lunch” as your status message

 

Fixes

[WMS-4053] – col: fixed an issue with CDRView not displaying trunk name correctly
[WMS-4060] – sys: fixed an issue with BLF keys showing wrong Colleague status in case call to trunk failed with “480 temporarily unavailable” error

Firmware

[WMS-4056] – dev: new firmware for WP410 2015: 50.145.6.142, WP480(G) 2015: 55.145.6.96, WP490(G) 2015: 59.145.6.135, WP480G 2017:63.145.7.246, WP490G 2017: 67.145.7.113

  • Improved processing of BLF keys states
  • Improved DNS resolving in failover mode in a scenario where Devices Failover by DNS is used (where Main PBX is configured as Primary DNS server, Failover PBX as Secondary DNS server)

 


WMS Hotfix version 3.87.39079.52 Date 12.02.2018

Fixes
[WMS-3723] – sys: fixed an issue in which screen sharing in ubiconf could stop working in case of 30 and more viewers
[WMS-3912] – wms: fixed an issue in which PBX sent SIP invite to W-AIR SB with empty SDP in some cases
[WMS-3931] – col: fixed an issue in which user status did not change back to “available” in Collaboration after an appointment in Outlook calendar ended
[WMS-4006] – col: fixed an issue in which after adding a new Feature Key Call group, Timetable, Switch or Trunk, its status was not updated in Collaboration Feature keys menu unless user reloaded Collaboration web page
[WMS-4066] – wms: fixed an issue with 30 seconds delay during generating a sound file using text-to-speech feature

Other – these tickets don’t depend on WMS version and are available in stable
[WMS-3953] – conf: fixed an issue with Firefox asking camera and microphone permission multiple times
[WMS-4008] – conf: fixed an issue with status not changing on macOS after exiting a conference
[WMS-4009] – conf: fixed an issue in which colleagues did not receive email invitation
[WMS-4038] – conf: added preview of images received via chat when clicking on them
[WMS-4040] – conf: user can now select to see his/her own video full screen
[WMS-4052] – conf: removed US Number 1.614.347.9868


WMS Hotfix version 3.87.38923.52 Date 02.02.2018
[WMS-3899] – wms: fixed an issue with endless loading of storages tab on Virtual PBXs starting from WMS version 3.87.38426.52
[WMS-3994] sys: fixed an issue with BLF keys displaying wrong Colleague status in some cases on WP4XX 2015-2017 starting from WMS release 3.87.38834.52
BLF displayed a monitored Colleague as busy, after he/she completed an attendant transfer and was no longer busy


WMS Hotfix version 3.87.38834.52 Date: 30.01.2018
Improvements
[WMS-3396] – wms: added possibility to enter MS SQL instance for connection to CDR

[WMS-3531] – wms: improvements for WMS Dialplan debug page

Fixes
[WMS-3919] – sys: fixed an issue in which it was impossible to access phonebooks / call history on WP 2015-2017 in case of large phonebooks or CDR Sqlite backend
[WMS-3958] – wms: fixed an issue in which Sounds menu was not reachable even if access was allowed by ACL starting from WMS 3.86.37657.41
[WMS-3961] – sys: fixed an issue with wrong user status of BLF keys on WP4XX 2015-2017 starting from WMS release 3.87
[WMS-3963] – col: fixed an issue in which the groups that did not fit into the screen, were in some cases not displayed on the left sidebar of Colleagues menu even using scrolling in some cases
[WMS-3964] – col: fixed wrong visualization of plus sign in fax number in Outgoing faxes menu of Collaboration starting from WMS release 3.87
[WMS-3988] – sys: fixed an issue in which SIP Proxy failed to start on PBXs with configured UCARP failover after upgrade to WMS version 3.87

Other – not related to WMS version and already available in stable
[WMS-3928] – conf: fixed an issue with login for external users via social network buttons
[WMS-3929] – conf: notification in case user starts speaking but microphone is muted is now shown repeatedly (every 10 seconds)
[WMS-3936] – conf: fixed desktop sharing on Firefox
[WMS-3944] – conf: fixed wrong scaling in two display mode


WMS Hotfix version 3.87.38680.52 Date: 25.01.2018

[WMS-3949] – sys: added the possibility to force a LAN IP as failover
Note: to speed up the switch from Main to Failover PBX on WP in case you are using Failover in the local network, proceed with the following configuration:

  • add a provision parameter to /rw2/etc/provision.conf in the [wildixp2] section: FailoverPbxIp=10.135.0.1, where 10.135.0.1 is your IP address of th4e failover PBX which is reachable by phones, then check-sync the devices
  • in case the device is provisioned to the Main PBX by domain name, it’s necessary to force IP address for “SIP Server 1” by adding the PBX name – IP record in WMS Settings -> System -> Network -> Hosts (if not added yet) and adding a provision parameter “ForceResolveIp=yes” under the section [wildixp2] in the /rw2/etc/provision.conf

Note: The configuration will not work in case main or failover PBX has dynamic IP.

[WMS-3521] – sys: fixed an issue with video calls between 2 devices in WMS network
[WMS-3941] – sys: fixed an issue with “Ring only active device” feature not working correctly, if web phone was set as an active device after browser reload
[WMS-3952] col: fixed an issue with black screen in screen sharing in case two monitors were connected


RC Hotfix Version 3.87.38592.52 Date: 19.01.2018

Fixes
[WMS-3885] – sys: fixed an issue with absent disk space on volume /dev/shm in case of large phonebooks (over 200K)
[WMS-3899] – wms: fixed an issue with endless loading of storages tab with WMS v. 3.87.38426.52 on virtual PBXs
[WMS-3920] – sys: fixed an issue in which a user who had a Web phone and a W24FXS 2015 registration, could not answer incoming calls from Collaboration

Firmware
[WMS-3927] – dev: new firmware for WP490G 2017 which increases BLF subscription limit to 150 and fixes an issue with echo and audio distortion at high volume


RC Hotfix Version 3.87.38477.52 Date: 15.01.2019

Improvements
[WMS-3670] – wms: DHCP server page improvements

Fixes
[WMS-3773] – col: fixed no audio issue in Windows Web phone with direct RTP enabled for incoming call after 2.7.0 Wildix Integration service release
[WMS-3788] – col: fixed an issue in which call to web phone did not work if direct RTP was enabled in Collaboration
[WMS-3869] – wms: fixed one way audio issue on WP600AXX on incoming group call with strategy call all: 32
[WMS-3874] – col: the date in chat recents list is now updated correctly
[WMS-3881] – web: fixed a web phone crash in case of video call to offline user

Firmware
[WMS-3857] – dev: new firmwares for BRI/PRI media gateways, version 2.0.41.672
What’s new:

  • Jitter buffer increased to 900 ms
  • Added provisioning parameters to control the jitter buffer values for PRI 2017 from WMS -> PBX -> SIP-RTP ->Jitter Buffer

[WMS-3888] – dev: new firmware for WP480(G) 2015: 55.145.6.94, WP490G 2015: 59.145.6.133, WP480G 2017: 63.145.7.237, WP490G 2017: 67.145.7.104

  • WP490(G) 2015, WP480G 2017: the volume control bar during a call was moved down to avoid the over-laying with other information present on the screen
  • WP480(G) 2015, WP490(G) 2015, WP480(G) 2017, WP490(G) 2017: improved reliability of “packet loss” indication
  • WP480G 2017, WP490G 2017: fixed the visual problem where “FCF” and “New Voicemail” notifications overlapped each other

 

Other – not related to WMS version and already available in stable
[WMS-3795] – api: web-api should be updated to support chat markers
[WMS-3866] – conf: improved Video conference connection status information


*** Release Candidate 3.87 ***

Note: after updating to this version you will not be able to go back to WMS 3.86!
Important: before proceeding with the update to WMS 3.87, please make sure WP600AXX, Android, iOS apps are updated to the latest version!!!
Version 3.87.38426.52 Date: 10.01.2018
New Features
[WMS-2667] – sys: added call group login / management feature

User can dynamically log into call groups from Collaboration Settings -> Contact center (or in WMS -> Users -> Edit preferences -> Settings -> Contact center):

  • Check the groups you would like to answer for (on this page you can only dynamically log into call groups; status in call groups where you are statically added as a member via WMS cannot be changed on this page)
  • Enable “Sign-on” option
  • Click “Save”

Enable “Unavailable on away / dnd” if you would like to be auto-paused in all call groups when changing user status to Away / DND.
Additionally, if this option is and “Auto pause on no answer” is enabled in WMS -> Dialplan -> Call groups -> Edit strategy, your status will be changed to “Away” in case of no answer within the timeout (Call group Timeout or Dialplan “Call group” application Timeout) for the duration period of Wrap up time).
Example:

  • “Auto pause on no answer” is set to “only this queue” in WMS -> Dialplan -> Call group -> “Edit strategy”
  • “Wrap up time” is set to 10 seconds in WMS -> Dialplan -> Call group -> “Edit strategy”
  • “Timeout” is set to 5 seconds in WMS -> Dialplan -> Call group -> “Edit strategy”
  • “Unavailable on away / dnd” is enabled in Collaboration Settings -> Contact center

In this case if you don’t answer a call within 5 seconds timeout (“Timeout” set on Call group) you are put on pause in the current queue for the duration period of 10 seconds (“Wrap up time” set on Call group) and your user status changes to “Away” with expiration period of 10 seconds (because “Unavailable on away / dnd” is enabled and “Wrap up time” is set to 10). If “Unavailable on away / dnd” is disabled in Collaboration Settings -> Contact center, you are still put on pause in queue but your user status does not change to “Away”.
Limitations:

  • No sync between dynamic users added via WebAPI and via Contact Center (which means, users added via WebAPI cannot see that they are present in the group from Collaboration Call Center menu)
  • Queues with strategy “Call all 32” do not support this feature!
  • If “Auto pause on no answer” is enabled in WMS -> Dialplan -> Call group -> “Edit strategy”, it is necessary to specify “Wrap up time” (must be different from 0!)

Updated documentation: https://confluence.wildix.com/x/BAA8AQ
[WMS-2995] – col: chat sync over web Collaboration and delivery confirmation
Make sure iOS, Android and WP600AXX are updated to the latest version!!! This feature improves chat sync between Android app / WP600AXX and web Collaboration:

  • Improvement of unread chat messages sync
  • Improvement of chat sync between devices of the same user
  • Added Recents sync: the most recent chats appear above
  • Added notification in case message was not delivered to Presence server
  • It is now displayed when the other party is typing a message

 

 

[WMS-3253] – sys: caller name and company is now displayed on incoming call from trunk

Caller ID is now displayed with “Company” field for calls from trunks on Wildix devices:

  • For calls from other PBX users (via Mobility service): “Department” field (if present) is displayed
  • For calls from phonebook contacts: “Organization” field is displayed
  • For calls from trunks with Worldwide Phonebook feature: “company” field is not displayed

Feature can be disabled via Dialplan Global Variable: DISPLAYINFOUSELOOKUP=no

It is possible to display additional info using “Set” Dialplan application, example of Dialplan configuration:

  • Add Dialplan application “Set”, enter the value EXTRADISPLAYINFO into the first input field and EXTRA (use your own value) im the second input field -> allows adding additional information to the caller ID name
  • Add Dialplan application “Set”, enter the value DISPLAYINFOPATTERN into the first input field and {name:0:5} [{company}] / {extra} into the second input field -> allows customizing the information displayed as caller ID, e.g. in this example only 5 first digits of the caller ID name will be displayed
  • Add Dialplan application “Lookup caller name in phonebook” -> it’s necessary to add this Dialplan application after “Set” -> EXTRADISPLAYINFO or Set -> DISPLAYINFOPATTERN
  • Add Dialplan application “Dial the phone”

 

[WMS-3330] – sys: call forward notification is now displayed on WP 2015-2017 also for external calls with indication in case of “Call Forward All” with indication of call forwarding destination
In case both Internal and External call forwards are active, destination set up for Internal call class is displayed on the screen.

[WMS-3395] – api: documented fax send web PBX API
Developer documentation:

[WMS-3401] – col: it is now possible to click on a colleague’s geolocation in chat menu, to open geographical map where the geolocation of that user is indicated

[WMS-3402] – col: added a notification before closing the collaboration tab asking the user for confirmation

[WMS-3436] – сol: added scrolling to calls history

[WMS-3437] – сol: added buttons on mouse over when selecting a colleague in colleagues / chat (recents)

  • Colleagues menu: added call / chat buttons on mouse over
  • Recents tab in chat menu: added call button on mouse over

[WMS-3481] – sys: user status with expiration time and status message (if set) is now reported using TTS (text-to-speech)
Notes:

  • Feature is available only for Cloud systems (per year / per month subscription) with Premium license
  • Feature is available only for “en” or “en-us” languages

</em >
[WMS-3503] – col: call quality is now indicated in call dialog for calls via WebRTC

[WMS-3515] – wms: added transcripts of voicemail for premium accounts
Notes:

  • Feature is available only for PBXs with monthly / yearly subscription with Premium license
  • Feature is enabled by default (disable it in WMS Dialplan -> General Settings, “Convert Voicemails to text and send by email”)
  • Language of calling party who recorded the message is used for transcription

[WMS-3516] – wms: improved template for email notifications in case of missed calls, new voicemails, missed chats etc
[WMS-3566] – api: added API to delete / get / update/ add a user

Documentation is placed to folder “/var/www/api/doc” and is available at the URL “https://<pbx-host>/api/v1/doc/”

[WMS-3604] – col: added call continuity option to call dialog
In case user has more than one device registered to his/her account, Continuity option is available in call dialog during a call: click “Other” button in call dialog and then select the device you want to continue the call on (the call will be automatically picked up on the selected device).
[WMS-3667] – col: added quick “send to voicemail” button to Call dialog -> Transfer

  • Send a call to your own Voicemail: upon receiving an incoming call (or during an active call) press Transfer button from the call dialog window and then press the Voicemail icon
  • Send a call to a colleague’s Voicemail: upon receiving an incoming call (or during an active call) press Transfer button from the call dialog window, enter a colleague’s name or extension number into the search field, and then press the Voicemail icon near the name of the colleague

 

[WMS-3685] – sys: added possibility to use TTS in Dialplan

It is now possible to dynamically create audio files using TTS (text-to-speech) service using Dialplan applications:

  • Play sound
  • Play sound and wait for digits

Feature is available for:

  • Cloud systems; Languages “en”, “en-us”, “it”, “de”, “fr”, “nl”
  • License – premium, per year, per month.

To restrict synthesise waiting time (in case TTS service is unavailable), use the global Dialplan variable “TEXTTOSPEECH_TIMEOUT” in “Dialplan → General settings”. Default value is 3 seconds.
It’s possible to use “Jump to if” Dialplan application with channel variable “TTSSTATUS” and values: “UNDEFINED”/”SUCCESS”/”FAILURE” after execution the play sound app.
Example of Dialplan configuration:

  • Add Dialplan application “Set” -> Language -> “en”
  • Add Dialplan application “Play sound” and enter into the field: Welcome to Wildix PBX ${CALLERID(name)}
    Optionally you can add Dialplan application “Jump to if” -> condition: “${TTSSTATUS}”!=”SUCCESS” -> Procedure, Number: <extension>

Result: the caller whose name is John Doe will hear “Welcome to Wildix PBX, John Doe”; language was set to English because the phrase “Welcome to Wildix PBX” is in English.

[WMS-3719] – wms: added auto upgrade and reboot of all the devices after PBX upgrade
“Configure / sync” of all the connected Wildix devices will be done automatically 20-30 minutes after the PBX has been upgraded
[WMS-3774] – col: W-AIR Headset user assignment
Documentation: https://confluence.wildix.com/x/iQA8AQ
Improvements
[WMS-3260] – sys: support setting of ToS / DSCP by PBX for calls to WebRTC phone
[WMS-3385] – wms: UX improvements of Storage page

  • File system upgraded to ext4
  • Usability improvements allowing user to easily add NFS/Windows shares

 

[WMS-3389] – col: added HTML5 notifications for new Voicemails
[WMS-3433] – col: chat conference refactoring and improvements
[WMS-3434] – сol: settings sub-menu has been moved to the left sidebar
[WMS-3435] – col: people from the same department are now automatically added to user’s roster and displayed in Colleagues menu upon the first time access

[WMS-3447] – sys: improvements for dial by name audio files in EN package
[WMS-3461] – sys: added back audio files for alphabet letters to en/it/fr sound packages
[WMS-3473] – wms: added values selection to Dialplan “Set” application -> “ITC”: 3.1 kHz / unrestricted / speech
Note: previously it was possible to enter these parameters manually

[WMS-3484] – col: limited the use of special characters when importing or manually adding users
Note: Control characters are no longer accepted; only the following symbols can be used as separators in CSV export: “;”, “,”, “|” (others are substituted with space)

[WMS-3488] – sys: search in phonebook is now performed on selected phonebook on WP2015-2017

Enter Phonebook menu -> press “Filter” and select a phonebook -> press “Search”: the search is now performed only on the selected phonebook.

Related ticket: WMS-3808

[WMS-3491] – sys: pressing a digit on dialpad during search in phonebook on WP4X0(G) 2015-2017 now jumps to the search results starting from the letter corresponding to the pressed digit
During a search in phonebook press a digit on Dialpad. E.g. press 2 (digit 2 corresponds to letters A/B/C): search results for phonebook contacts whose names start with A are displayed.

Related issue: WMS-3808
[WMS-3495] – sys: it is now possible to call numbers starting with ** from W24FXS 2015
Note: it’s necessary to re-provision W24FXS 2015 after the upgrade

[WMS-3500] – col: the first available device is now displayed to user instead of “Any” option upon the first login
Note: additionally when preferred device becomes unavailable, “Web phone” is automatically selected

[WMS-3501] – col: added support for drag & drop of calls for call transfer using Windows PC touch screens on Windows 10
[WMS-3502] – col: added Company to live search results and increased results readability
[WMS-3505] – sys: added support of call on hold status indication on Kuando Busylight
Call on hold status indication: user status color + fast blinking yellow + delay + ringtone playback

[WMS-3517] – wms: the exact time at which auto-upgrade will take place is now indicated in WMS Settings -> Tools and Utilities -> Upgrade
[WMS-3544] – sys: SIP Proxy is no longer restarted in case of continuous network interface goes up and down continuously
[WMS-3564] – col: added answer / refuse button in Chrome push notifications
Notes:
Press “More” to be able to Answer / Reject a call
To apply this change, it’s necessary to restart the browser after the update

[WMS-3586] – col: added usernames for chat conversation copied into buffer
[WMS-3613] – wms: increased size of Edit Dialplan dialog window
[WMS-3617] – col: added notification in case a user attempts to remove a colleague from roster who is configured as BLF key “Colleague”
[WMS-3620] – сol: added indication whether default DSCP QoS parameter in Settings -> Web Phone is ON or OFF (which depends on the value selected on SIP-RTP page)
[WMS-3621] – col: added live search of contacts by Organization (Company) field
[WMS-3668] – col: auto adjust mic is now disabled by default in Settings -> Web Phone to avoid problems related to increased microphone sensibility
[WMS-3669] – col: removed sound for connection / disconnection from PBX
[WMS-3683] – sys: improved Nagios monitoring
Documentation: https://confluence.wildix.com/x/C4AlAQ

[WMS-3693] – dev: re-enabled support for G729 codec on W-AIR SB
[WMS-3701] – dev: added back support for assigning two or more W-AIR handsets to the same user
Note: this feature was disabled in WMS-452
[WMS-3706] – wms: improved email notification template about no free space in storages

[WMS-3732] – wms: phone number is no longer normalized during phonebook import if it starts with a letter or if country code is not set

[WMS-3733] – wms: added “Support https only” option to SIP-RTP page
Feature is enabled by default on new PBXs: HTTP connections are redirected to 443 or to the alternative https port if configured

[WMS-3737] – col: implemented cloud-based geolocation service
[WMS-3739] – col: speeded up pictures preview which was slow after the picture was opened more than once

[WMS-3740] – wms: improvements for Dialplan applications “Play sound” and “Jump to if”

  • Increased the width of the input field for the applications applications “Play sound/Play sound and wait for digits”
  • Added condition template “${TTSSTATUS}”!=”SUCCESS” to the application “Jump to if”

Related ticket [WMS-3685]
[WMS-3742] – wms: added click-to-callback link to missed call email notification

[WMS-3743] – col: usability improvements for live search field

  • Added placeholder text “Search or dial a number”
  • Moved “SMS”, “fax” and ‘post-it’ buttons to additional menu (under “+” icon)
  • Other minor graphical improvements

[WMS-3744] – col: usability improvements for Colleagues menu
Groups moved to left sidebar menu, allowing selection by All groups or by separate group

[WMS-3754] – dev: added support for call feature settings for whitelist blacklist classes from WP
Press Features menu -> Call type: internal -> select whitelist / blacklist and set Call features for the selected call class

[WMS-3756] – sys: added support for custom dial parameters in Dialplan
Additional dial options (e.g. “g” – proceed with Dialplan execution at the next priority in the current extension if the destination channel hangs up) are now supported via Dialplan application “Set”, example:

  • Add “Set” Dialplan application and insert manually the string DIAL_OPTIONS into the first input field and g (or another option) into the second input field
  • Add the Dialplan application to which it should be applied, e.g. “Dial the phone”, “Dial the trunk”, “Trunk group”

Otherwise you can add a new Global Dialplan variable: set(DIAL_OPTIONS=g)

[WMS-3757] – dev: added notification on WP display when user tries to modify his / her user features from Features menu of WP, but it is restricted by ACL

[WMS-3760] – col: DTMF dialog graphical improvements

[WMS-3791] – wms: simplified requirements for the department field in “Edit” user menu
More special characters are now accepted in the Department field

[WMS-3799] – col: it is now easier for the user to select chat conversations that he/she would like copy into buffer
Related ticket: WMS-3586

[WMS-3800] – sys: caller name lookup feature Worldwide Phonebook is now enabled by default

  • Feature is available for Cloud PBXs with premium license
  • Caller ID name lookup in external resource is performed automatically for calls from / to Trunks
  • Feature can be disabled via global dialplan variable EXTCONTACTLOOKUP=no

[WMS-3801] – сol: web push option is now enabled by default for new users
Note: feature can be disabled in Collaboration Settings -> Personal, “Web push”

[WMS-3812] – sys: improved readability of dialplan log messages from wms.log
Fixes

[WMS-3143] – dev: fixed an issue with time settings (timezone, NTP server, DST selected in “Edit Device” menu) not being applied to W-AIR base SB
Related ticket: WMS-3636
[WMS-3438] – col: accented characters in caller name are now correctly forwarded to pop up URL command

[WMS-3441] – sys: improved single sign-on via AD
Now you can import users as:

  • userPrincipalName as LOGIN and log in on PBX via: username@domain
  • sAMAccountName as LOGIN and log in on PBX via: domain\username

Note: LOGIN must be the same as stored in local LDAP
[WMS-3442] – col: fixed an issue with CDR-View exporting call duration values as text in case of Excel export of Data greed
Note: this allows working with call duration values in XLS and applying formulas
[WMS-3478] – sys: fixed an issue in which calls through remote PBX / send SMS via remote PBX may stop working after PBX changed its serial
[WMS-3525] – sys: fixed an issue with WP 2015 and pre 2015 becoming slow to handle incoming calls in case of many incoming SIP notify messages
The issue reproduced for call group agents using strategy “Ring all” after upgrade to WMS 3.85
[WMS-3530] – sys: fixed an issue in which call history couldn’t load on WP2015-2017 if phone number in CDR contained diacritic letters

[WMS-3548] – wms: removed deprecated ios6 support

[WMS-3561] – col: fixed a crash on Safari v. starting from 11.0.X occurring when attendant console was being used with VoiceOver on MacOS

[WMS-3622] – dev: fixed an issue causing continuous reboot of W-AIR bases in W-AIR network if bases had different time settings (DST enabled / disabled in “Edit Device” menu)
Related ticket: WMS-3636

[WMS-3633] – col: fixed an issue in which Voicemail was not displayed at all in Collaboration if corrupted

[WMS-3655] – col: fixed an issue with loss of chat messages in case connection to MySQL was temporarily lost

[WMS-3665] – col: fixed an issue in which Web phone did try to reconnect after receiving HTTP error 503: service unavailable

[WMS-3675] – col: fixed issues with Collaboration in Firefox v. 57

  • Fixed: Post-It as personal reminder appeared again after closing notification and reloading the browser page
  • Fixed: Emojis were not displayed in Kite widget

[WMS-3697] – sys: fixed an issue with notification displayed in some cases after reboot of Cloud PBXs about partitions not being mounted

[WMS-3703] – sys: Voicemail application is now automatically finishing its execution in case of long silence (>10 seconds)

[WMS-3705] – wms: fixed an issue in which users import from MySQL could freeze in some cases without displaying any error to user
[WMS-3714] – col: fixed an issue with empty colleagues in Collaboration in some cases

[WMS-3745] – dev: fixed an issue with first pressed digit being ignored when in standby mode on WP4XX 2017
Related issue: WMS-3808

[WMS-3747] – wms: fixed an issue with contacts from private Phonebooks being available for all users in case there were no public Phonebooks on PBX

[WMS-3829] – col: fixed an issue in which clicking on HTML5 notification about a new chat message, could open an old chat message with a different user
[WMS-3856] – sys: fixed an issue with no audio after attended transfer of a call from trunk using W-AIR handset (ref. 2017122210000011)
[WMS-3865] – col: fixed an issue with user status not being changed to initial value after user exists from the conference and user status displaying corrupted symbols
Issue reproduced in case unicode symbols were used in user status message
[WMS-3868] – wms: fixed an issue with wrong format of CONTACT header in SIP message in case the INVITE message from the operator was missing some parts
Firmware

[WMS-3636] – dev: new Firmware for W-AIR system version 04.00.00.02

    • Fixes a problem with no SIP registration after disconnecting and connecting again the Ethernet cable on SB Base

Fixes problems described in WMS-3143 and WMS-3622

 

[WMS-3808] – dev: new firmware for WP410 2015: 50.145.6.140, WP480(G) 2015: 55.145.6.93, WP490G 2015=59.145.6.132, WP480G 2017: 63.145.7.236, WP490G 2017: 67.145.7.103

 

  • Added the option to control the time of the missed event-LED blinking (option can be configured in provision.conf)
  • Improved jumping between different parts of phonebook search results: scroll down to load the next part of search results, and then scroll up again to go back to the previous part: the marker is now set to the correct position (to the last page of the first part of search results)
  • Added the option to select the active microphone during the “hands-free+handset picked up” mode (Menu -> Audio -> Handsfree sound input)
  • WP4X0G 2017: the upper blue bar was removed inside the phonebook, call history, features, voicemail inbox to increase readability of phone menus
  • WP490G: the volume control bar during a call was moved down to avoid the over-laying with other information present on the screen

 

Other – these tickets are not related to WMS version and are already available in stable
[WMS-3467] – conf: improvements for connection quality indicator
Notes:
In case of no internet connection, an error message is displayed
Added a row with connection status description

 

[WMS-3588] – col: improved visibility of Wildix application “W” icon in Chrome OS
[WMS-3607] – sys: added US toll free DID number
[WMS-3632] – conf: fixed an issue with screen sharing not being recorded in case of conference recording
[WMS-3639] – conf: video conference recording files are now saved in format compatible with MacOS and Windows PC
[WMS-3643] – conf: added possibility to mute / unmute participants connected via phone (audio only mode)

[WMS-3663] – kite: added redirects for kite.wildix.com and conference.wildix.com URLs

[WMS-3664] – kite: added privacy cookie disclaimer when opened in a separate window

[WMS-3672] – conf: fixed a problem with low quality video from remote user who connected without video and then enabled webcam

[WMS-3673] – conf: fixed an issue in which miniatures of other users were blank and it was impossible to start recording / streaming, in case all users except speaker were in mute mode
[WMS-3677] – conf: added Spain / Portugal / Poland / Canada / Russia DID numbers
[WMS-3696] – conf: fixed an issue in which focus on screen sharing displayed empty screen in some cases

[WMS-3727] – conf: recorderding/streaming improvements

  • Improved reactivity of conference recording buttons
  • Added progress on icon while enabling / stopping recording
  • Removed “Starting” notification
  • Removed “Start record” dialog
  • Loader is now displayed instead of Record button when starting

[WMS-3753] – conf: fixed an issue in which error “room not available” could appear after short period of network downtime
[WMS-3854] – conf: added notification in case user starts speaking but microphone is muted
[WMS-3871] – kite: improved screen sharing

  • all available space in the window is now used for screen sharing
  • improved notifications in case connection was lost

 


Version 3.86.38262.41 Date: 28.12.2017
Improvements
[WMS-3366] – col: added support for apu75 in headset integration
[WMS-3735] – col: Outlook integration improvements

  • Fixed a crash at startup after Outlook integration installation (ref. 2017102310000209)
  • Fixed an issue with status presences not being displayed in some cases in Outlook (ref. 2017112410000509)

Fixes
[WMS-3399] – col: fixed an issue in which the headset connected to dock station started to ring after user put the active call on hold, made the second outgoing call and then cancelled it

[WMS-3690] – sys: fixed an issue with peer2peer connection between Client PBXs in WMS network after WMS v. 3.82
[WMS-3824] – sys: fixed an issue with chat messages not being stored into MSSQL backend in case user name contained backslash symbol
[WMS-3826] – col: fixed an issue with missed call notification not disappearing in some cases after opening call history in Collaboration


Version 3.86.38102.41 Date: 20.12.2017

Improvements
[WMS-3766] – sys: increased reliability of mobile apps call push notifications
[WMS-3676] – sys: speeded up mobile apps call push notifications delivery

Fixes
[WMS-3787] – sys: fixed an issue in which user who put a call from trunk on hold using Web Phone to perform a call transfer, could still hear the voice of the external user (while the external user was hearing music on hold), starting from WMS stable 3.86.37977.41
[WMS-3779] – sys: fixed an issue in which upgrade procedure could fail in some cases
[WMS-3818] – sys: fixed an issue in which IVR menu and user ringtones in Sounds menu of Per User PBX displayed blank page if accessed via WMP starting from WMS v. 3.86.37657.41
[WMS-3476] – sys: fixed an issue with WMS freezing after saving CDR MySQL configuration


Hotfix Version 3.86.37977.41 Date: 12.12.2017
[WMS-3624] – sys: fixed an issue with muted incoming audio on web phone after receiving attended transfer from another web phone on Chrome 62
[WMS-3763] – wms: fixed an issue with sounds menu displaying a blank page in case accessing WMS of Per User PBX via WMP starting from WMS v. 3.86.37657.41
[WMS-3767] – col: fixed an issue with Web push notifications not working in some cases after reloading Collaboration
[WMS-3780] – sys: fixed an issue in which upgrade procedure from WMS version lower than 3.85 failed due to missing sf2 license file


Hotfix Date: 07.12.2017

[WMS-3721] – wms: fixed an issue with WP 2015-2017 displaying all the phonebooks even in case ACLs restricts it starting from WMS v. 3.86.37657.41


Hotfix Version 3.86.37881.41 Date: 06.12.2017

[WMS-3730] – sys: fixed an issue with blank Call and chat history menu in some cases after upgrade to the last WMS stable v. 3.86.37657.41
[WMS-3755] – col: fixed an issue with video not starting after call transfer after upgrade to the last WMS stable version
[WMS-3729] – col: fixed an issue with duplicated call recordings on history page after WMS Beta v. 3.86.36976.40


Version 3.86.37842.41 Date: 05.12.2017

[WMS-3541] – sys: Cloud PBXs are no longer rebooted during the upgrade procedure (services are restarted but host system is not rebooted)
[WMS-3698] – col: fixed an issue with call dialog window disappearing after starting video in case on the other side phone doesn’t have a webcam (issue introduced in WMS v. 3.86.35892.31)
[WMS-3709] – sys: fixed an issue in which provisioning of WP400 might not work starting from WMS v. 3.85.36942.23


SMS daemon version 0.86.37466 Date: 28.11.2017
[WMS-3406] – wms: fixed an issue with script /usr/local/bin/smsdrxcb.sh not being executed after incoming SMS in case apostrophe symbol was present in the message


WP4X0 firmware Date: 27.11.2017
[WMS-3644] – dev: new firmware for WP410 2016: 50.145.6.136, WP480(G) 2015: 55.145.6.90, WP490(G) 2015: 59.145.6.129, WP480G 2017: 63.145.7.228, WP490G 2017: 67.145.7.97

  • Fixed an issue in which WP4X0 could have audio issues during long calls due to short lease time set on DHCP server (due to continuous NTP sync attempts)
  • Removed NTP Server 2 from the factory settings
  • Added support for input of diacritic characters (acute, circumflex, tilde, umlauts…)
  • User can now scroll through the entire phonebook, regardless of number of records
  • The contents of all phonebooks is now shown by default when entering Phonebook menu (press “Filter” key to be able to select a phonebook in which to perform the search
  • User can now correctly cancel an outgoing call after “Call completion” (fixed an issue with WP not sending BYE message after processing REFER)
  • WP480G 2017: fixed a provisioning issue present in new shipment
  • WP480G 2017: fixed a rare issue when calling echo test

Release Candidate Version 3.86.37657.41 Date: 24.11.2017

[WMS-3561] – col: fixed a crash on Safari using attendant console with VoiceOver on Mac OS (starting from Safari 11.0.X)
[WMS-3659] – dev: added support for new range Mac addresses for W-AIR Base Outdoor
[WMS-3691] kite: fixed a rare issue in which video was not shown in Collaboration (if SW serial of the PBX is different from HW serial)


Release Candidate Hotfix Date: 21.11.2017

SIP Proxy version 5.0.3.86.37643
[WMS-3686] – sys: fixed an issue in which two Web phones present in device selection list after refreshing Collaboration in case push was enabled


Release Candidate Version 3.86.37531.41 Date: 14.11.2017

[WMS-3629] – sys: fixed an issue in which it was impossible to run the sync script on Client PBX in some cases because iptables could block SSH on Server PBX
[WMS-3605] – col: fixed an issue in which auto-away feature was still active even if after being disabled


Release Candidate Version 3.86.37448.41 Date: 08.11.2017

Improvement
[WMS-3592] – sys: openvpn keys are now always unique

Hotfixes
[WMS-3608] – wms: fixed an issue in which chat history might not work after upgrade to 3.86.37338.41 in case of no CDR-backend enabled
[WMS-3550] – col: fixed an issue in which CDR-View could not load in firefox browser
[WMS-3606] – sys: fixed an issue with Client PBXs losing connectivity to Server after Server serial had been changed
[WMS-3618] – sys: fixed an issue in which call history on the WP 2015-2017 did not work in case MSSQL backend was used – regression after release wms 3.86.37338.41


Release Candidate Version 3.86.37338.41 Date: 01.11.2017

Note: Feature “Caller name lookup” is disabled by default (WMS-2958).
Improvement

[WMS-3221] – wms: chat history is now stored in MSSQL backend in case it’s available

Hotfixes

[WMS-3567] – col: fixed a very rare issue in which it was impossible to modify presence of colleague (if SW serial of PBX was different from HW serial)
[WMS-3466] – col: fixed an issue with popup app being opened twice in case outgoing call mode is set to call generation (ref. 2017100210000311)
[WMS-3489] – sys: fixed a very rare issue in which call completion did not work (if SW serial of PBX was different from HW serial)


Release Candidate Version 3.86.37270.41 Date: 27.10.2017

Hotfixes
[WMS-3563] – col: fixed an issue in which it was possible to open the webcam in the edit picture dialog only once
[WMS-3560] – col: fixed an issue in which some calls could randomly remain frozen in Attendant Console after call transfer
[WMS-3553] – sys: fixed an issue with calls not working in Collaboration for PBX using WBR0 interface

Firmware
[WMS-3134] – dev: new firmware for W24FXSR2 version 27.18.01.13
fixed an issue with caller ID visualization and custom ringtones playback for different call classes


Release Candidate Version 3.86.37172.41 Date: 26.10.2017
[WMS-3518] – wms: added script which discovers file system errors before upgrade and shows alert message
[WMS-3535] – wms: fixed an issue with Mail2SMS which appeared after WMS release 3.86.36723.37


Sipproxy version 5.0.3.86.37161 Date: 23.10.2017

– stability improvement


Sipproxy version 5.0.3.86.37078 Date: 13.10.2017

[WMS-3462] – sys: fixed an issue in which WP4X0 2015-2017 could randomly show wrong notification about missed calls when in failover mode


Version 3.86.37067.41 Date: 12.10.2017

Feature

[WMS-3297] – api: added documentation for Wildix web integration service library
LINK: https://github.com/Wildix/IntegrationService

Fixes

[WMS-3464] – sys: fixed an issue with random restart of sipproxy after the latest WMS version 3.85
[WMS-3468] – sys: fixed an issue with distorted incoming audio on WP410 using paging multicast
[WMS-3507] – wms: fixed an issue in which it was impossible to correctly save BLF parameters in Collaboration / WMS starting from WMS version 3.86.37032


Release Candidate 3.86 Version 3.86.37032.41 Date: 11.10.2017

Feature
[WMS-3423] – kite: audio calls support in Safari 11

Improvements
[WMS-3032] – wms: ongoing calls are now displayed in Dialplan Debug menu
[WMS-3475] – wms: auto upgrade email notification is now sent only if a new version is available

Fixes
[WMS-3376] – sys: reduced callweaver logs verbosity
”warning” is no longer shown for trunks which are registered and working
[WMS-3416] – api: login change is now applied without having to reboot device
API documentation: https://manuals.wildix.com/apis/POST%2B%252FDevice%252Flogin.html
[WMS-3465] – col: fixed an issue in which scrolling up removed all chats in text conference
[WMS-3468] – sys: fixed an issue with distorted incoming audio on WP410 using paging multicast


Version 3.86.36976.40 Date: 04.10.2017

IMPORTANT: Starting from this version, use only PBX domain name in Kite links (do not use PBX serial); e.g.:
– kite.wildix.com/[pbx domain]/[extension] – correct;
– kite.wildix.com/[pbx serial]/[extension] – not correct.

Features

[WMS-2340] – sys: added PBX key support in WMS and WMP for Per-User PBXs, and auto-reload of system services after changing the number of users

[WMS-3254] – sys: added the possibility to set a custom ringtone for calls in dialplan
Dialplan Application “Set” -> “Ringtone” -> select a ringtone from the list

[WMS-3344] – sys: usage of TTS / Worldwide Phonebook features is now limited to Per User PBXs with monthly / yearly subscription only; TTS requires at least one Premium license; Worldwide Phonebook requires at least one Business license
ASR service coming in the next releases will be also restricted to monthly / yearly PBXs with at least one Premium license

Improvements
[WMS-3041] – sys: improved registration of remote W01-2FXS gateways over some firewalls which block encrypted SIP traffic over port 5060 UDP
[WMS-3098] – wms: added HW info (Processor, Memory) to Activation / Licenses page
[WMS-3124] – col: updated welcome email design
[WMS-3252] – sys: call recording is now saved as a single file
[WMS-3284] – col: “on the phone” and “ringing” status is now shown in Outlook (with Outlook integration)
[WMS-3307] – col: failover user can now see in/out call dialogs during failover mode
[WMS-3317] – wms: improvements for TTS file generation in sounds manager
[WMS-3332] – col: improved reliability of connection to integration services on Mac OS, and, partially on Windows
[WMS-3343] – sys: improved debug information for Dialplan Application “Set”
[WMS-3348] – sys: presence statuses improvement in the phonebook and live search of WP2015-2017 and W-AIR handsets
Presence status is now shown for users of the system from phonebook and during live search
[WMS-3349] – sys: the contents of all phonebooks is now shown by default when entering Phonebook menu on WP2015-2017
Also ”Filter” soft key has been added inside Phonebook menu, allowing you to select a phonebook in which search must be performed
[WMS-3370] – col: increased size of web CRM iFrame depending on monitor
[WMS-3387] – col: phonebooks are now shown in alphabetic order by name
[WMS-3388] – col: focus is now automatically set to live search field after opening Collaboration
[WMS-3398] – sys: auto upgrade improvements
improved error recognition in the email sent to admin with upgrade results
[WMS-3415] – wms: increased default jitter buffer for remote devices to improve call quality over Internet

Fixes

[WMS-3074] – dev: fixed an issue in which “Colleague” BLF on WP480/490G 2017 displayed office number instead of external called number / name during an outgoing call of this colleague (ref: 2017070410000402)
[WMS-3263] – col: fixed an issue in which fax sending in TIFF format failed using Collaboration and fax printer (ref: 2017082310000133)
[WMS-3342] – sys: fixed an issue in which it was impossible to view Voicemails on WP4X0 2015-2017 in case CallerID was in a format, different from “User name” <1234567890> (for example, in format 075216627) (ref: 2017090710000144)
[WMS-3352] – wms: it is no longer allowed to create users with same user names
[WMS-3361] – sys: fixed caller ID visualization for picked up and missed calls to Call groups (ref: 2017091310000196)
[WMS-3367] – sys: fixed blind transfer via WMS network after call continuity
[WMS-3372] – col: fixed an issue in which office number was used instead of mobile during SMS sending from Collaboration in some cases
[WMS-3380] – sys: fixed file rotation to prevent shares and USB storage from running out of space
[WMS-3381] – sys: improved user features module by additional checking for corrupted files
this improves the situation in which user could not log in or make calls, in case some files were corrupted in user preferences
[WMS-3383] – sys: fixed scenarios where XMPP server might not start correctly at boot
[WMS-3392] – col: fixed an issue in which Mobility number (long number) was not fully shown in Device selection field after Chrome update to ver 62.0.3202.18 on Mac OS
[WMS-3404] – sys: fixed an issue in which users could be shown as offline in some specific cases
[WMS-3409] – sys: fixed an issue in which FXS gateways could randomly lose SIP registration after WMS release 3.85
[WMS-3413] – wms: fixed an issue in which it was impossible to set password for multiple selected users
[WMS-3421] – sys: fixed an issue with returned transfer on FXS gateways
[WMS-3424] – col: fixed chat conferences which stopped working since hotfix 18.09
[WMS-3431] – col: fixed an issue in which user, after being moved to a different PBX in WMS Network, could see himself / herself in Chat -> Recents
[WMS-3450] – wms: fixed an issue in which admin with default password was not required to immediately change password, starting from the last beta version

Firmware
[WMS-3454] – dev: new firmware for BRI/PRI version 2.0.40.747
minor fixes and improvements

Other (these tickets are not related to WMS version and are already available in stable)

[WMS-3347] – conf: server side recording
Notes:
– Only one active recording per conference room
– Recording cannot be launched simultaneously with live streaming from the same conference room
– Recordings made by one user are not visible to others, but it’s possible to send the download link via chat
How-to: https://www.youtube.com/watch?v=Qj51eUwNZZ4&feature=youtu.be

[WMS-3373] – conf: added connection quality for participants
Hover the cursor over the participant’s image to see the current Bitrate, Packet loss percentage, Resolution, Frame rate and other data


Version 3.86.36723.37 Date: 18.09.2017

IMPORTANT: Starting from this version, Overlay system is no longer supported
Features

[WMS-2534] – sys: WMS network Failover service
More information: LINK

[WMS-2556] – sys: added encryption of user passwords and password reset
This feature significantly improves password security and introduces the following changes:

  • newly created passwords are no longer readable via WMS and backups:
    • they are no longer visible in CSV export done from WMS -> Users
    • they cannot be consulted in Collaboration Settings – > Personal
  • password reminder works by generating a new password
  • TAPI clients must be reconfigured to use SIP Password
  • SIP passwords can no longer be created by PBX admin, they must be generated automatically
  • phone PINs to perform login are set to 5 digits
  • it’s no longer possible to assign WP600AXX to a user with super admin password
  • Overlay Enterprise WiFi system is not supported

 

[WMS-2685] – col: added Chrome Push notifications
Enable it in Collaboration Settings -> Personal, “Web push”
Notes:

  • Web push can be enabled only for Chrome browser
  • Web push doesn’t work if Chrome is not running (you receive notifications when you turn on Chrome again)
  • Web push is turned off after logout (but Logout doesn’t unsubscribe from notifications
  • Feature works if PBX is accessed via domain with valid certificate

 

 

[WMS-2756] – wms: new sounds manager interface
what’s new:

  • graphical improvements
  • added possibility to move files from/to another folder
  • added possibility to drag&drop files – mp3,wav,alaw, 10 MB max
  • added TTS (text-to-speech)

 

[WMS-2875] – sys: added Wildix SNMP MIB for trunk status (ticket 2017052410000379)
MIB file with description of supported OIDs can be downloaded HERE
It’s possible to monitor trunk ID, label, type, direction, state

[WMS-2896] – dev: added the possibility to archive calls from WP 2015-2017 history menu
Select “Detail” in History menu
[WMS-2958] – sys: caller name lookup feature – Worldwide Phonebook
Feature is available for Cloud PBXs with premium license
Caller ID name lookup in external resource is performed automatically for calls from / to Trunks

[WMS-3086] – sys: added support for DSCP on WP600AXX (tk. 2017070510000437) starting from WP600AXX version 2.8.22
Note: if enabled, value from SIP-RTP page is applied for WP600AXX; feature can be disabled in Phone App -> Advanced Settings -> Developer
[WMS-3115] – col: support DSCP prioritization in WebRTC phone for Chrome
How to ensure QoS: LINK
[WMS-3132] – col: added visual / audio notifications for incoming call to monitored callgroup in Collaboration (Ticket#: 2017062610000257)
[WMS-3133] – col: call intrusion feature for colleagues calls on right click
Added Listen / Barge / Whisper actions on right click in Collaboration
Visibility of these actions can be limited by ACL “can / cannot” – “intrusion”
Listen = silent intrusion
Barge = conference intrusion
Whisper = partial intrusion

[WMS-3158] – wms: TTS file generation support in sounds manager

  • added Text to Speech (TTS) window inside sounds menu allowing you to record the file with different voices in different languages
  • added the possibility to set volume / speech / pitch (in “Advanced” settings)
  • feature is available for all Per User PBXs with monthly / yearly subscription

[WMS-3187] – wms: support for xOpen in Hotel integration
Documentation has been updated: LINK
[WMS-3195] – sys: added force_lookup_number function which allows displaying a specified number instead of a real caller / called ID in call dialog and CDR
Scenario: user dials a number from Collaboration; a different number (specified by system administrator) is called instead of the number known to user
How to implement: add Dialplan application Set -> FORCE_LOOKUP_NUMBER)=XXXXX, (where XXXXX is the number which must be displayed to user) followed by Dial trunk / Trunk group Dialplan application

[WMS-3198] – sys: added shell dialplan function
Example of query to sqlite using shell: Dialplan application Set – USERID – ${SHELL(/usr/bin/sqlite3 /mnt/cticonnect/cticonnectdb “select username from cti_contacts where phonebook_id = 6 and mobile = ‘${EXTEN:1}'”)}
[WMS-3208] – wms: added keep-alive option in SIP trunk settings menu
[WMS-3245] – sys: added support for dialing letters in Collaboration and importing of letters inside numbers in phonebooks
[WMS-3251] – sys: added support for emergency calls from unassigned phones
To allow calls to any destinations from phones which are assigned to “unknown” account: add a new Dialplan procedure called login-emergency and specify called numbers which can be dialed and Dialplan applications which must be executed for each number
[WMS-3256] – col: added the possibility to open Collaboration using f11 hot key if no number is selected
notes:
– hot key can be changed in Collaboration Settings -> Personal, “Dialing hot key”
– in case Collaboration as a native app is installed, the app will be opened by pressing hot key

[WMS-3308] – wms: added trunk ID number visualization on trunks page
[WMS-3310] – sys: ACL “can / cannot” “delete calls” ability is now present in the list of default ACL settings

 

Improvements

[WMS-3047] – sys: provisioning URL is now always pushed with custom secure port 443 to W04FXS and W04FXO

[WMS-3073] – dev: added support for country tones in W24FXS 2015 (same as for W04FXS and W02FXS)

[WMS-3083] – sys: only 5 digits of PIN are now required for phone login service

[WMS-3087] – wms: support multiple email address or special characters in the dialplan application “Go to voicemail”

[WMS-3099] – sys: support for direct RTP for intercoms and improvements (by default added for 2N Helios, Alphatech and Mobotix)

[WMS-3127] – wms: whitespaces are now removed from strings before importing users from external backend

[WMS-3141] – col: added preview and download button for images in file transfer
[WMS-3168] – sys: disabled remote support for WMS 2

[WMS-3191] – wms: refactoring and redesign of Dialplan debug page

[WMS-3194] – sys: priority is now given to calls over paging on WP4XX 2015-2017 series

[WMS-3200] – col: removed users CSV import button on Client PBX

[WMS-3201] – col: sub-menu of live search can now be navigated using keyboard arrow keys

[WMS-3202] – col: graphical improvement for chat menu fixes a rare issue in which user had to scroll to see the latest messages

[WMS-3204] – wms: improved email notification for “scheduled backup to email”

[WMS-3207] – col: web phone calls are no longer interrupted by intercom and paging
To enable web phone to answer Paging / Intercom call immediately, even when user is busy on the phone: add Dialplan Custom application SIPAddHeader(Call-Info: sip:wildixgw;answer-after=0;force)
To enable web phone to answer Paging / Intercom call after 5 seconds timeout, even when user is busy on the phone: add Dialplan Custom application SIPAddHeader(Call-Info: sip:wildixgw;answer-after=5;force)

[WMS-3213] – sys: temporarily disabled subscribe for MWI for W24FXS 2015 to solve the issue with random loss of SIP registration (released in stable as hotfix)

[WMS-3230] – col: reduced CPU usage while disconnected

[WMS-3243] – wms: decreased load on PBX generated by web phone

[WMS-3250] – sys: improved recovery procedure for Cloud PBXs (released to stable as hotfix)

[WMS-3255] – sys: improved call classes support for Switzerland (Tk. 2017082110000306)
Added new premium prefixes to the table of CH call classes – LINK

[WMS-3266] – col: it is now possible to dial letters in live search; “/” is now automatically removed before dialing as normally it separates prefix from the main number

[WMS-3282] – col: improved jitter buffer for calls to conference service

[WMS-3318] – col: added an option to open contact from call dialog drop down menu
previously it was only possible by clicking on user name in call dialog

[WMS-3334] – sys: improved the sequence of HTTP headers via Tproxy

 

Fixes

[WMS-3021] – sys: fixed an issue with call group manager receiving missed call notification in case another call agent answered or picked up the call, starging from WMS version 3.85.35473.20 (released in stable as hotfix)

[WMS-3062] – sys: fixed an issue preventing ejabberd from receiving update with new IP address during IP address change

[WMS-3072] – col: fixed an issue in which image preview for files were not displayed in chat after login to Collaboration on a different PC with many chat dialogues and file transfers present in chat history

[WMS-3075] – sys: fixed an issue in which users with deactivated call waiting could receive more than one call if device ringing arrived after second call

[WMS-3152] – sys: fixed an issue in which call transfer via feature code (#8 / #9) on call group with strategy “Call all: 32” did not work starting from WMS release 3.85

[WMS-3156] – sys: fixed an issue with access to Voicemail via feature code 81 not working in Italian language with parameter “Announce date, time and caller phone number” enabled in Dialplan > General Settings, due to a missing audio file (otrs: 2017072410000384) (released as hotfix to stable)

[WMS-3173] – sys: fixed one way audio for local devices with non-standard network addresses in some cases (additional fix for WMS-2580)

[WMS-3175] – col: fixed an issue in which it was impossible to end a video call if second user turned off the camera after WMS release 3.86.35894.26

[WMS-3177] – sys: fixed an issue with calls generated using Any device being shown twice in CDR-View

[WMS-3197] – col: fixed an issue in which it was impossible to answer incoming calls from Collaboration if called user had a web phone and a third party device starting from WMS release 3.85 (tk 2017080210000306) (released as hotfix in stable)

[WMS-3214] – sys: fixed an issue in which SIP Proxy could randomly fail to start after upgrade to WMS version 3.85 (released as hotfix to stable)

[WMS-3218] – col: fixed an issue in which double loader was displayed on history page after refresh

[WMS-3220] – col: fixed an issue with BLF Colleague keys were renamed to 0 after upgrade from 3.80 to 3.85 for BLF keys configured from Collaboration

[WMS-3223] – col: fixed an issue in which it was impossible to place a call via chat phone icon

[WMS-3229] – col: fixed an issue in which messages containing < … > could not be sent

[WMS-3232] – wms: fixed wrong ring order with linear and round robin strategy of call group (ticket # 2017081010000185)

[WMS-3234] – wms: re-enabled scheduled import for phonebook import from CSV for per user PBXs (excluding cloud PBXs)

[WMS-3236] – hotel: fixed an issue in which it was impossible to place calls from room with checked-in status using FIAS integration

[WMS-3244] – col: canceling edit in phonebook does not allow to perform desired action

[WMS-3248] – sys: sipproxy cannot be upgraded if pbx is not activated

[WMS-3258] – sys: callgroup member added via fc 97 not “in use” status during call (ticket otrs 2017082210000162)

[WMS-3259] – sys: fixed an issue in which caller name received from SIP trunk was not used for incoming calls in WMS version 3.85 (released in stable as hotfix)

[WMS-3262] – wms: fixed an issue in which PBX upgrade could not be completed in some cases, due to a missing file (released in stable as hotfix)

[WMS-3271] – wms: wrong display of functional keys on wp phones after edit

[WMS-3272] – sys: fixed wrong called name for outgoing calls via trunk for called numbers not present in phonebook, starting from WMS stable release 3.85.36497.23 (released in stable as hotfix)

[WMS-3275] – col: improved called number field in IVR menu

[WMS-3281] – sys: fixed an issue which could cause History and Phonebook menu on WP4X0 2015/2017 become unavailable due to firewall block

[WMS-3285] – sys: fixed an issue which could cause no device list and presences in Collaboration after a user was deleted from PBX and ejabberd engine restarted (released as hotfix to stable)

[WMS-3286] – col: fixed an issue with with incorrect timezone when selecting grouping “by hour of day” in CDR-View

[WMS-3295] – col: fixed an issue with Kite user always appearing with offline status in Collaboration chat after restarting ejabberd service

[WMS-3296] – wms: “export dialplan” feature now works correctly also when exporting big dialplans

[WMS-3300] – sys: fixed a misprint in voicemail email notifications in French

[WMS-3304] – wms: fixed an issue in which in some cases search for devices using Automatic provisioning mode could last forever

[WMS-3305] – wms: hyphen symbol is now supported in titles of Windows / NFS shares

[WMS-3314] – wms: fixed an issue in which it was impossible to use ” or ‘ in Called Number in Dialplan (issue present only in Beta)

[WMS-3350] – sys: fixed an issue in which a PBX could not connect to WMS network after factory default (released to stable as hotfix)

[WMS-3382] – col: fixed an issue with access to Collaboration after WMS release 3.85.36662.23 (released in stable as hotfix)

 

Firmware

[WMS-3211] – dev: new firmware for WP410=50.145.6.127, WP480G 2015 55.145.6.83, WP490G 2015=59.145.6.121 WP480G 2017=63.145.7.61, WP490G 2017=67.145.7.79
What’s new:

  • Improvements for backlight settings
  • Added Audio quality indication in case of Packet loss / Network problems / Critical network problems which help user understand when network problems cause bad audio quality
  • Improved left column BLF keys visualization on idle screen (only WP490G 2017)
  • It is now possible to use OK key (V key) to confirm actions in Phonebook sub menu
  • It is now possible to turn pages during search by long-press (over 2 seconds) on Navigation Down and Up keys (in Phonebook, History and during live search in Phonebook)

 

Other – the following issues do not depend on WMS version and are already available both in Beta and in Stable

[WMS-2919] – conf: released live streaming to FB / YouTube
Video tutorial: LINK
[WMS-3090] – api: added support for ERP SW incoming call notifications via wildix TAPI driver
[WMS-3106] – conf: fixed an issue in which DND status of user did not change after leaving the conference
[WMS-3119] – conf: video conference graphical and usability improvements
[WMS-3235] – api: fixed an issue in WebAPI demo code which allowed adding queue members with no extension causing ejabberd crash
[WMS-3264] – col: added support for dialing phone numbers which include letters in Chrome extension
[WMS-3277] – col: support of call control / mute via new Wildix WHS 2017 (with USB cord)
How-to: LINK
[WMS-3283] – api: fixed an issue causing agents added to a queue via wallboard API change their order after page refresh
[WMS-3326] – conf: resolution is now shown in camera settings
[WMS-3340] – conf: chat over video / screen sharing is now shown with opacity
[WMS-3356] – conf: it’s now possible to create video conference with & in topic


Version 3.86.36228.31 Date: 01.08.2017

Features
[WMS-2553] – col: collaboration as native application

Mac OS X – https://www.wildix.com/IntegrationUtility/osx/Collaboration-0.1.3.dmg
Windows – https://www.wildix.com/IntegrationUtility/win/Collaboration-0.1.3.exe

[WMS-2563] – sys: Oracle FIAS key system certification
Documentation is coming the next week
[WMS-2804] – col: added proxying of camera image previews with Wildix Integration Service
this feature allows for reducing the load on the PBX in case of a video call from the intercom.
Feature works in all the cases where the intercom camera can be accessed via the browser and the browser has connection to the Wildix Integration Service, here are some examples:
– video doorphone, Collaboration user and the PBX are located in the same office (local network)
– video doorphone and Collaboration user are located in the same office and the PBX is in cloud (LAN behind NAT)
– video doorphone and the PBX are located in the same office (LAN behind NAT), Collaboration user is in a different LAN behind NAT (user has VPN to the office LAN)
– PBX and Collaboration user are located in the same office (LAN behind NAT), video doorphone is in a different network (doorphone must have an external IP)
– PBX in cloud, intercom in LAN1 (office), Collaboration in LAN2 (home) (user has VPN to the office LAN or a specific port is forwarded on the office router, or the doorphone must have an external IP)

Improvements
[WMS-3095] – wms: added support of import of all fields supported by phonebook and the possibility to use concatenation of fields (Exchange Server, Google, Office 365)
[WMS-3171] – sys: increased upgrade reliability over slow / high latency Internet connections for WMS release 3.85

Fixes
[WMS-3034] – sys: fixed an issue with random wrong notification about new voicemail messages
[WMS-3093] – dev: corrected a grammar mistake in German translation on WP 2016-2017 (otrs 2017070410000484)
[WMS-3106] – col: fixed an issue in which DND status was not automatically changed after user left video conference
[WMS-3184] – sys: fixed incorrect mobility timeouts processing with some Belgium operators

Firmware

[WMS-3155] – dev: new firmware for WP410 2015 – 50.145.6.123; WP480(G) 2015 – 55.145.6.80; WP490(G) 2015 – 59.145.6.118; WP480G 2017 – 63.145.7.56; WP490G 2017 – 67.145.7.69

– Fixed the issue in which NTP sync was performed every minute.
– Fixed wrong IP address assigning (an issue in which phone was showing IP 10.10.1.xxx).
– Fixed a German translation grammar error (related to WMS-3093)


Hotfix Version 3.86.36206.30 Date: 28.07.2017

[WMS-3169] – wms: fixed an issue with empty PBX empty and live search not working (hotfix, issue present only in 3.86.36206.30)


Note that updating to 3.86 it will be not possible to come back to 3.85

Version 3.86.36206.30 Date: 28.07.2017

Features
[WMS-2695] – sys: dial by name feature for en/it/fr/de/nl sound packages
[WMS-2801] – col: added possibility to quickly set user status
[WMS-2803] – sys: auto upgrade feature for PBXs
[WMS-2828] – col: possibility to set presence status of other users
note: feature is by default restricted by ACL to use it, add ACL permission “can modify presence”
[WMS-2829] – col: added door opening button to Collaboration call dialog with Dialplan Custom App SIPAddHeader(Unlock-Button:)
Example of Custom app: SIPAddHeader(Unlock-Button:*1234#), where “*1234#” is DTMF
[WMS-2830] – sys: FIAS certification with Evols
[WMS-2845] – wms: ACL “cannot call speed dial” was replaced with “cannot call numbers in allowed phonebooks”
[WMS-2858] – col: added possibility to hide last X digits in CDR-View
can be enabled in WMS Settings > Call and chat history > CDR Settings; restricted via ACL “can/cannot see full number in CDR-View”
[WMS-2861] – col: removed currency indication in CDR-View
[WMS-2939] – wms: added “auto pause on no answer” option for call groups
– users are automatically paused in all call groups if they have no device registered, if call to queue was not answered within the timeout or if user has DND and rejects call
– after being paused, users must unpause manually
– The option is not available for “call all” strategy

[WMS-2961] – dev: documented procedure of deleting a handset IPEI from W-AIR SB to be able to reuse the slot
Documentation: LINK
[WMS-3012] – wms: added the possibility to auto delete old CDR after X months
added a new parameter to WMS Settings > Call and chat history > CDR Settings
[WMS-3022] – sys: support login via Office 365 and Google single sign-on via field “login” (otrs 2017052510000233)
[WMS-3056] – wms: support auto upgrade from WMP
API documentation coming soon here: https://manuals.wildix.com/pbx-control-apis/

Improvements
[WMS-2665] – sys: always use rfc2833 payload received in incoming invite
[WMS-2824] – sys: ACL “can view calls” is implemented for WP4X0 2015-2017
[WMS-2833] – col: added support for drag&drop transfer on call group
[WMS-2906] – sys: added notification to log file if FTP backup cannot be completed
[WMS-2915] – col: increase chat history size
– chat database size has been increased to 100Mb only for Sqlite (if some other backend is used, then chat history is kept for 30 days, as previously)
– if chat history size has exceeded 100Mb but chat history period is less than 30 days, the last 7 days of chat history is kept in any case
– after reaching the size of 100Mb, the oldest messages are deleted

[WMS-2927] – col: support numbers in e.164 format from 7 to 18 digits for live search
[WMS-2933] – col: automatically refresh Collaboration after PBX upgrade
[WMS-2956] – col: fixed an issue in which “auto-away” status could automatically switch to “available” after 24 hours (otrs 2017060810000497)
[WMS-2959] – col: add tool tip on contact name during a call (click to add / show contact)
[WMS-2965] – dev: give priority to calls over paging on WP4X0 2015-2017
[WMS-2994] – sys: increase apt download timeout
[WMS-3027] – sys: improve sip proxy service watchdog
[WMS-3035] – wms: optimization processing of web api requests
[WMS-3065] – sys: number of users is now updated automatically after they have been added via WMP
[WMS-3097] – wms: allow to use concatenation of fields during users import
[WMS-3109] – col: increase visibility of the separator between chat and history
[WMS-3130] – wms: ACL can/cannot “modify presence” must be disabled by default
described in [WMS-2828]
[WMS-3142] – sys: increased default timeout for intercom service
to improve intercom support for mobile app, which is coming in the next Android version

Fixes
[WMS-2854] – sys: fixed an issue with call being assigned to a wrong user in CDR for call answered via queue pickup function
[WMS-2935] – sys: fixed an issue in which login / logout using feature code 99 might not work for WP400 (otrs: 2017051810000318)
[WMS-2997] – wms: fixed an issue in which user with diacritic characters in name could not sync contacts using iOS CardDAV sync
[WMS-3058] – col: fixed a specific issue in which active device setting in Collaboration could be lost every minute (support ticket: 2017052910000351)
[WMS-3059] – sys: fixed an issue in which calls via trunks could stop working in high load conditions (10+ concurrent calls during several days) due to incorrect counter of license limitation
[WMS-3066] – sys: fixed an issue in which calls via Web phone might not work in some cases after changing network configuration (otrs: 2017070610000426)
[WMS-3092] – wms: fixed an issue in which dialplan could stop working after applying backup of WMS 2.0
[WMS-3117] – col: fixed an issue in which it was impossible to call numbers starting with # from Collaboration, because the symbol was not converted into ASCII code (otrs: 2017071410000223)
[WMS-3123] – sys: fixed an issue which could cause continuous restart of SIP Proxy on new Cloud PBXs with low number of users
[WMS-3144] – sys: fixed an issue with PBX engine hanging in some cases due to broken connection to MySQL backend

 

Firmware

[WMS-2955] – dev: caller ID name support for W04FXO (W04FXO/W04FXO v. 5.01j)
[WMS-2992] – dev: new firmware for WP490EXT 2017 – 163.145.106.17
[WMS-3029] – dev: new firmware for WP490EXT 2015 – 153.145.105.229
[WMS-3085] – dev: new firmware for WP410 2016 – 50.145.6.117; WP480G 2016 – 55.145.6.79; WP490G 2016 – 59.145.6.115; WP480G 2017 – 63.145.7.55; WP490G 2017 – 67.145.7.65

WP490EXT 2017:
– Graphical improvements

WP490EXT 2015:
– The backlight of the display is now synced with the phone

WP410 2016:
– Fixed hanging of the phone during the FW upgrade
– WP display no longer turns on when BLF status of a user changes
– Decreased priority of calls with SIP header “Call-Info: answer-after=0” (e.g. Intercom feature, Paging calls): in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call

WP480G 2016:
– WP display no longer turns on when BLF status of a user changes
– Decreased priority of calls with SIP header “Call-Info: answer-after=0” (e.g. Intercom feature, Paging calls): in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call
– Unified call waiting tone (as on other Wildix devices, relates to WMS-2453)

WP490G 2016:
– WP display no longer turns on when BLF status of a user changes
– Decreased priority of calls with SIP header “Call-Info: answer-after=0” (e.g. Intercom feature, Paging calls): in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call
– The backlight of WP490EXT 2015, 2017 is now synced with the phone
– Added firmware upgrade of WP490EXT 2015, 2017 via provisioning
– Unified call waiting tone (as on other Wildix devices, relates to WMS-2453)

WP480G 2017:
– Graphical improvements
– WP display no longer turns on when BLF status of a user changes
– Decreased priority of calls with SIP header “Call-Info: answer-after=0” (e.g. Intercom feature, Paging calls): in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call
– Unified call waiting tone (as on other Wildix devices, relates to WMS-2453)
– Improved audio processing

WP490G 2017:
– Fixed hanging of the phone during the FW upgrade
– WP display no longer turns on when BLF status of a user changes
– Decreased priority of calls with SIP header “Call-Info: answer-after=0” (e.g. Intercom feature, Paging calls): in case the phone is already in conversation, such calls are treated as a normal 2nd incoming call
– The backlight of WP490EXT 2015, 2017 is now synced with the phone
– Added firmware upgrade of WP490EXT 2015, 2017 via provisioning


SIP Proxy version 4.2.10.36102 Date: 18.07.2017

[WMS-3123] – sys: fixed an issue which could cause continuous restart of SIP Proxy on new Cloud PBXs with low number of users


Version 3.85.36049.23 Date: 18.07.2017

Improvement
[WMS-2960] – col: new version of Headset Integration includes ringtone selection and volume adjustment for Kuando Busylight
available also in Stable version: go to Collaboration Settings -> Extensions and download Headset Integration component again to install this update

Fixes
[WMS-3102] – conf: fixed an issue in which SIP calls to conference could not be connected in some cases
[WMS-3108] – conf: fixed a screen sharing issue in which a customer could only see a miniature of the shared screen
[WMS-3112] – col: fixed wrong format of subject and “from” field in chat transcript email sent via Kite
Note: fixes are also available in Stable version


Version 3.85.36000.23 Date: 11.07.2017
[WMS-3076] – wms: fixed an issue in which MySQL custom CDR port was not used for connection after WMS version 3.85.35158.16 (tk. 2017070610000382)


Version 3.85.35992.23 Date: 10.07.2017

Fixes
[WMS-3046] – wms: fixed an issue with setting passwords on Users page
[WMS-3055] – wms: fixed an error notification in some cases after making changes and pressing “Save” on Call and chat history page starting from wms release 3.85
[WMS-3078] – wms: fixed wrong VM storage detection for pre-2016 chroot PBXs


Version 3.85.35961.23 Date: 06.07.2017

Fixes
[WMS-3049] – wms: fixed an issue in which it was impossible to edit NTP server settings on some cloud PBXs
[WMS-3050] – wms: fixed an issue in which it was impossible to manually set time on NTP server page
[WMS-3064] – sys: fixed an issue in which SIP Proxy was continuously restarting on cloud PBXs after upgrade to the last WMS stable 3.85.35914.23


Version 3.85.35914.23 Date: 04.07.2017

[WMS-2494] – sys: fixed one way audio with TWT SIP trunk sip in some cases
[WMS-3036] – sys: fixed an issue in which presence status in Collaboration could stop working on WGW500 or bigger PBXs starting from WMS v. 3.84.35087.12
[WMS-3038] – col: fixed an issue with login “remember me” feature not working starting from WMS v. 3.85.35101.15


Version 3.85.35901.23 Date: 30.06.2017

[WMS-3027] – sys: improved SIP proxy service watchdog


RC Version 3.85.35868.23 Date: 27.06.2017

Improvement

[WMS-2985] – wms: removed \n \r from the contact name during phonebook import from MSSQL backend to avoid call refusal on WP and improve phonebook visualization (ticket: 2017061310000398)

Fix

[WMS-3008] – sys: fixed scheduled backup to FTP


RC Version 3.85.35860.23 Date: 24.06.2017

[WMS-3007] – dev: fixed TON/NPI values (issue appeared in WMS version 3.85.35101.15; ticket 2017062210000621)


RC Version 3.85.35850.23 Date: 23.06.2017

Features
[WMS-1704] – sys: provide direct RTP for WebRTC phone on Windows when possible (experimental)
[WMS-2888] – col: support for headset integration over terminal server

Improvements
[WMS-2988] – sys: improved sipproxy HTTP API performance to avoid system failures on big PBXs
[WMS-3006] – wms: fixed an issue with Collaboration replying 488 to INVITE with audio+video (Ticket 2017042810000113)
fixes an issue in which video streaming from 2N doorphone couldn’t be enabled after having established the call

Fixes
[WMS-2999] – col: fixed an issue with auto answer for incoming calls via Collaboration with Jabra 9470 in some cases with Headset Integration 2.1.4 on Windows
[WMS-3005] – wms: fixed an issue in which basic authorization window was displayed instead of login page in case user session was lost / deleted


RC Version 3.85.35825.23 Date: 22.06.2017

Feature
[WMS-2645] – col: IBM connections integration
More info

Fixes
[WMS-2923] – sys: fixed an issue in which caller number was not displayed even if trunk supported it, in case of call forward “all” to external trunk (regression since version 3.83.33871.48)
[WMS-2979] – wms: fixed an issue with wrong options selected in “Edit” menu on Devices page after release 3.85.35227.16
[WMS-2976] – col: fixed an issue in which it was not possible to listen to most of Voicemails via the graphical menu of Collaboration since version 3.85.35623.22


Hotfix RC Version 3.85.35800.23 Date: 19.06.2017

[WMS-2969] – sys: fix RTPEngine startup issues on systems with VLAN interfaces


Hotfix RC Version 3.85.35791.23 Date: 16.06.2017

[WMS-2916] – col: fixed an issue in which Collaboration web page could freeze during login in case user had many BLF keys (issue is present only in beta starting from WMS release 3.85.35487.21)


Hotfix RC Version 3.85.35781.23 Date: 15.06.2017

 

[WMS-2949] – col: fixed an issue in which chat page was hanging after user switched browser from Chrome to Firefox or Safari (issue is present only in beta)


RC Version 3.85.35774.23 Date: 14.06.2017

Feature
[WMS-2765] – col: added ACL restricting presence
can/cannot Share status message via Kite
can/cannot Share geolocation via Kite
can/cannot View geolocation via Collaboration
can/cannot Share geolocation with [select group]

Improvements
[WMS-2894] – sys: return from transfer for calls transferred to a park orbit is now always enabled for the United States
[WMS-2924] – sys: reduced amount of presences sent to all clients when a new source is connected
Also fixes an issue with duplicate email for offline chat messages in some cases

Fixes
[WMS-2872] – sys: fixed an issue with mobile applications enabling speaker after semi-attended transfer from Collaboration after release 3.85.35510.21
[WMS-2879] – col: fixed an issue with automatic provisioning mode showing cancel button at the end of the procedure instead of finish after release 3.85.35227.16
[WMS-2920] – col: fixed an issue in which it was impossible to add colleague to roster when popup app was configured
[WMS-2928] – col: graphical improvement for History tab: “duration” column has been adjusted to fit the frame in Safari browser
[WMS-2946] – wms: fixed invalid 2fa barcode for google authenticator app on iOS in case user full name contained spaces or diacritics

Firmware
[WMS-2929] – dev: W-AIR firmware package 0.38: fixes an upgrade issue of package version 0.37 for W-AIR Bases with FW version minor than 03.24.00.00 (regression introduced in WMS version 3.83.34260.03)


RC Hotfix Version 3.85.35711.23 Date: 09.06.2017

[WMS-2918] – wms: fixed an issue in which user preferences could not be saved from WMS if Popup URL field contained non-HTTP(S) link (lost fix of wms-2579)
[WMS-2792] – wms: added detection of any HDD to the Storages page, not only USB (additional fix)


RC Version 3.85.35678.23 Date: 07.06.2017

Features
[WMS-1927] – col: video from intercoms is now displayed immediately
Important: make sure Android / iOS apps, WP600AXX are updated to the latest stable versions.

[WMS-2656] – col: added video preview from intercoms to Collaboration
How-to: add a Dialplan custom application “SIPAddHeader(Camera:URL)”, where URL is the path to the intercom videostream (JPEG format), examples:
SIPAddHeader(Camera:http://admin:meinsm@10.100.4.113/record/current.jpg?sync=-99)
SIPAddHeader(Camera:http://admin:admin1@10.100.4.44/snapshot/view0.jpg)
SIPAddHeader(Camera:http://admin:admin@192.168.1.100/picture0.jpg)
SIPAddHeader(Camera:http://www.testcam.local/camera/image.jpg)
SIPAddHeader(Camera:https://admin:mypassword@10.100.4.111/api/camera/snapshot?width=1280&height=960&fps=15)
note: only Google Chrome web browser is supported; door open button is coming in the next version, at the moment it is necessary to use DTMF to open the door

 

[WMS-2783] – col: it is now displayed when user is typing a message
those who use “Remember me” feature for login must refresh the Collaboration browser web page after the upgrade

 

[WMS-2792] – wms: added detection of any HDD to the Storages page, not only USB
[WMS-2821] – sys: FIAS certification with Direct Holiday

Improvements
[WMS-2587] – api: Wallboard is now integrated into WebAPI interface
use WebAPI interface for Wallboard, documentation: https://manuals.wildix.com/collaboration-webapi/#wallboard
remember to update WebAPI library in case you have not done it after release of v. 3.85.35394.19

[WMS-2636] – sys: features set via phone (call to feature code) are now applied to all active classes if class not specified
[WMS-2791] – col: improved phonebook menu error notifications in case incorrect number format is used
[WMS-2798] – dev: 12h format is now used on WP when AM / PM is selected
[WMS-2846] – sys: added push notifications removal script to PBX
Script: push_remove
Arguments:
push_remove -h -> display help
push_remove -list -> display list of extensions that subscribed to push notifications
push_remove 315 -> remove push notifications for extension 315
push_remove 315 316 317 -> remove push notifications for extensions 315, 316 and 317

[WMS-2847] – dev: W24FXS 2015 rollback improvements of ticket WMS-2161 (improved caller ID support for W24FXS 2015) since Gigaset analog phones stopped showing CID after upgrade
[WMS-2868] – wms: chat history sync is now on by default
Note: chat sync setting has been removed from CDR page

[WMS-2889] – col: attendant console improvements for visually impaired users: focus is now set to caller’s name in case of a new incoming call (in case accessibility voice-over feature is enabled)

Fixes
[WMS-2591] – sys: fixed an issue with missed call being assigned to a wrong user using application dial the phone with music on hold option and mobility extension enabled
[WMS-2748] – sys: hold / unhold events are now blocked for non-Wildix devices and Wildix FXS gateways to prevent hangups
[WMS-2810] – sys: fixed an issue with Voicemail becoming unavailable after pbxengine failure during voicemail recording
[WMS-2812] – sys: fixed an issue with PPI / PAI SIP headers not being added during re-invite over SIP trunk (this issue was causing call termination with some VoIP operators)
[WMS-2815] – col: fixed an issue in which “Send SMS” button was always disabled in call history
[WMS-2843] – sys: fixed a loop during fax sending in some cases
added global Dialplan variable: GFAXCONGESTION_TRY (default value=30)
[WMS-2851] – wms: fixed an issue with fetching mails test not working in some cases
[WMS-2860] – sys: fixed an issue in which Kite didn’t work for users who have diacritics symbols in username
[WMS-2866] – col: fixed an issue with CDR-View access not working in some cases using MySQL / MSSQL CDR backend
[WMS-2880] – sys: fixed an issue with incoming call push notification always using a silent ringtone after user enabled and then disabled the feature “ring only active device”
[WMS-2882] – sys: fixed unexpected error in some cases during login with 99 code (regression after WMS version 3.84.34728.10)
[WMS-2885] – col: fixed an issue with user getting a duplicate of the last popup notification with his/her own user picture
[WMS-2891] – dev: fixed an issue with provisioning of W-AIR Base SB with firmware older than 3.55 not working starting from stable release 3.84.35087.12
[WMS-2892] – dev: fixed an issue in which it was impossible change login for W-AIR users in some cases after upgrade to stable release 3.84.35087.12
[WMS-2893] wms: WMS network menu is now enabled even if PBX is not activated
[WMS-2895] – dev: fixed an issue in which call waiting tone on WP for France interrupted (silenced) audio for 10 seconds after release 3.82.32387.27

Firmware
[WMS-2849] – dev: new firmware for WP410 – 50.145.6.84; WP480 – 55.145.6.75; WP490 – 59.145.6.110; WP480G 2017 – 63.145.7.49; WP490G 2017 – 67.145.7.39
All models:
– Fixed an issue with displaying of 12-h time format
WP410:
– Fixed an issue with displaying of 12-h time format
– Fixed audio distortion issue at max volume level


Version: 3.85.35487.21 Date: 24.05.2017

New Features
[WMS-2183] – sys: screen sharing apps keyboard and multi monitor support
Note: feature is available in stable and Kite
[WMS-2714] – col: support of Call Group / Group pick up / DTMF BLF keys in Collaboration -> Function keys menu
[WMS-2776] – sys: Fias certification with Ericsoft
Supported features can be checked in PMS Matrix: https://www.wildix.com/us/portfolios/fias-fidelio-integration/#matrix
[WMS-2806] – dev: WP translation to Estonian

Improvements
[WMS-2702] – col: fixed an issue in which outgoing calls using Web phone did not work with some Dutch VoIP operators
[WMS-2752] – col: improvement of chat sync between devices of the same user
[WMS-2772] – sys: blue status is now shown for all users who have an active SIP phone
note: Wildix devices, excluding Windows TAPI and WebAPI
[WMS-2795] – wms: improved port selection for media gateways in “Dial trunk” Dialplan application
[WMS-2827] – dev: improved default volume level on WP410

Fixes
[WMS-2646] – sys: fixed an issue with PBX not sending notification about missed call to WP in case multiple “Call group” applications were present in Dialplan
[WMS-2681] – col: fixed an issue with one way audio for calls via Web phone in some cases after upgrade to stable release 3.84
[WMS-2708] – sys: fixed a problem with memory leak in sipproxy in some cases on some PBXs
[WMS-2731] – col: fixed one way video issue in case video was initiated by the client whose phone does not support video
example: user initiated video via Collaboration while talking on WP4X0, in this case the second party could not see video
[WMS-2761] – wms: open UDPTL port range over same interval as RTP port range
[WMS-2763] – iu: fixed an issue with auto answer for incoming calls after a few seconds on Jabra 9450 / 9450 PRO (Windows)
new version of Headset integration for Windows
[WMS-2767] – col: fixed an issue with impossibility to enter custom number as forward destination in Collaboration Settings > Features
[WMS-2781] – wms: fixed an issue with PBX local time not changing according to the time zone set in “Languages & Region” menu
[WMS-2796] – col: fixed position of Post-It
in some cases Post-It messages could be displayed outside the browser window
[WMS-2813] – sys: fixed an issue in which IP addresses of devices connected via tproxy were shown incorrectly after Beta version 3.85.35101.15
[WMS-2819] – col: fixed an issue with Popup URL execution failing in some cases if URL contained tag variable
[WMS-2823] – col: current timezone is now applied when grouping results “by Hour” in CDR-View
[WMS-2832] – sys: fixed an issue in which chat and presences did not work in case of WMS network after last Beta 3.85.35394.19
[WMS-2836] – sys: fixed an issue with scheduled backups not working in some cases


Version 3.85.35394.19 Date: 15.05.2017

IMPORTANT: This BETA release includes changes which require all PBXs in a WMS Network to be updated in order to use chat and presence.

Features
[WMS-2634] – wms: RTP keep alive packets are now sent during progress
[WMS-2640] – col: added web site and conference preview in chat messages
[WMS-2661] – sys: FIAS certification with Hoist group (Hotsoft)
FIAS integration developer documentation is available: https://www.wildix.com/wp-content/uploads/2017/05/Wildix-FIAS-Integration-guide.pdf
[WMS-2735] – sys: added a possibility to execute a script after receiving an SMS
how-to:

  1. Access PBX via SSH
  2. Copy template from /usr/local/share/scripts/ to working directory /usr/local/bin and rename file:
    cp /usr/local/share/scripts/smsdrxcb.sh.sample /usr/local/bin/smsdrxcb.sh
  3. Set result file as executable
    chmod a+x /usr/local/bin/smsdrxcb.sh
  4. Fill script by user actions

Improvements
[WMS-710] – col: use web socket for chat and presence
notes:

  • PBX must have domain name
  • All PBXs in WMS network must be upgraded together (сhat and presence will work only on upgraded PBXs
  • Users lose their chat history after upgrade except for history saved in local storage
  • Users who use locally installed wallboard/webapi must update WTAPI library in order to continue using these products
  • Make sure you have installed the latest version of Android/IOS/WP600a application to correct work of chat/presences on them

[WMS-2654] – sys: support alternative SIP port for remote registration of W01FXS / W02FXS
[WMS-2680] – sys: disabled automatic mail notification in case SIP trunk is not registered and added an option to enable it in Dialplan -> General Settings
[WMS-2684] – col: Colleagues and BLF tabs GUI improvements (already released in stable)
[WMS-2688] – col: added personal picture capture (Chrome / Firefox)
[WMS-2689] – wms: FTP back up server password is now hidden by default with the option to show it
[WMS-2690] – wms: networking / DHCP / language settings are now backed up, added option to apply networking settings during restore
[WMS-2715] – col: WMS and Collaboration minor graphical improvements
[WMS-2721] – sys: notification is now sent to admin in case the PBX is running out of free space
[WMS-2733] – sys: ACL rule “cannot use” -> “history” is now applied also for WP 2015
[WMS-2741] – dev: codec g729 temporarily disabled for W-AIR SB to avoid base blocks in ver r355b24 (already released in stable)
[WMS-2751] – col: webcrm improvements (force HTTPS if Collaboration was accessed via HTTPS)
[WMS-2755] – dev: fixed an issue in which W-AIR Base SB in some cases could not update FW starting from stable release 3.84.35087.12
[WMS-2784] – col: removed seconds from duration in CDR-View XLS exports
[WMS-2786] – api: WebAPI improvements
only PBX domain name / IP is now required for access and HTTPS is now used by default

Fixes
[WMS-2288] – wms: fixed an issue with impossibility to access wms interface due to slow CDR MSSQL connection
[WMS-2430] – dev: fixed an issue in which WP480 / WP490 could not connect to PBX if alternative TLS certificate was used
[WMS-2610] – sys: fixed an issue in which wrong user device status (ringing / talking / available) was displayed in some cases in Collaboration (already released in stable)
[WMS-2613] – sys: fixed an issue with attended transfer with call group strategy “call all 32” not working since last stable release 3.83 (already released in stable)
[WMS-2668] – sys: fixed an issue with absent user name in missed call notification in case en_us language was selected
[WMS-2672] – col: fixed an issue in which audio device did not switch to system default in case the selected device was removed
[WMS-2694] – sys: fixed an issue with call transfer over wms network not working in some cases
[WMS-2696] – col: fixed an issue in which preview of some images & videos could not be displayed in chat
[WMS-2697] – col: fixed Post-It visualization in case of resizing browser window
[WMS-2705] – col: fixed an issue in which Collaboration interface did not load correctly in case ACL group restricted user from sending SMS starting from WMS beta 3.85
[WMS-2707] – wms: fixed issue with access to WMS via IE after WMS release 3.85.35227.16
[WMS-2711] – wms: fixed an issue with impossibility to answer conference call if “any” device was selected
[WMS-2716] – col: fixed impossibility to playback custom ringtone in case the audio file name contained special symbols
[WMS-2717] – col: added notification about Edge browser not being supported (already released in stable)
[WMS-2726] – col: fixed an issue with users import not working in case user’s language was “ee” starting from beta release 3.85.35227.16
[WMS-2732] – sys: fixed an issue with language selected on language & region page not being applied for external calls in some cases, depending on SIP trunk parameters (already released in stable)
[WMS-2739] – wms: fixed visualization issue with missing buttons during upload of audio file in IVR in case of large IVR tree
[WMS-2740] – col: fixed an issue with impossibility to disable two factor authentication in WMS -> user preferences
[WMS-2766] – sys: fixed an issue in which encoding was set to G711a instead of G711u for PRI T1 interfaces (already released in stable)
[WMS-2771] – wms: fixed an issue in which bad entries were displayed in Devices tab in case a W04BRI with FW version different from the one present on the PBX was provisioned
[WMS-2774] – col: fixed an issue in which scrolling did not work for contacts, history and voicemail pages under Firefox

Firmware
[WMS-2729] – dev: new firmware for WP410 – 50.145.6.75 (HD audio improvement); WP490 2017 – 67.145.7.36 (GUI improvements)
[WMS-2736] – dev: W-AIR Base firmware 0.37 resolves the issue with upgrade from package version 0.36 not working
[WMS-2750] – dev: new firmware for PRI media gateways version 2.0.138.726 (fixed an issue with losing SIP registration after reboot)
[WMS-2775] – dev: new firmware for WP490 – 59.145.6.106; WP480 2017 – 63.145.7.45 (GUI improvements)


Version 3.85.35227.16 Date: 21.04.2017

Features
[WMS-2581] – dev: VLAN support for W24FXS 2015
[WMS-2629] – col: added Estonian language
[WMS-2641] – col: “until” value is now optional while setting away/DND status

Improvements
[WMS-2517] – col: form components updated to material design
[WMS-2647] – dev: date column alignment for history and Voicemail menus on WP2015-2017
[WMS-2648] – col: it is now possible to have up to 500 users in roster if more than 250 users are present on the PBX
[WMS-2651] – col: added live search for call forwarding destination setting in Settings > Features

Fixes
[WMS-2601] – col: fixed an issue in which after applying AM / PM time format settings user was logged out
[WMS-2653] – sys: fixed an issue with phone re-login using feature code 99 on FXS media gateway not working starting from WMS version 3.83.34402
[WMS-2669] – col: fixed an issue with country code not being applied after saving changes on Language&Region page
[WMS-2670] – col: fixed an issue with impossibility to configure BRI/PRI/FXO trunks in case price list name is too long
[WMS-2673] – sys: fixed an issue in which BLF subscription stopped working if device sent retransmissions for longer than 5 seconds (additional fix for WMS-2609)

[WMS-2674] – sys: fixed an issue in which calls in WMS network might not work after upgrade to last beta release 3.85
[WMS-2692] – sys: fixed an issue with impossibility to select more than 1 sound package on Cloud PBXs starting from stable release 3.84

Firmware
[WMS-2663] – dev: new firmware for W24FXSR2 version 27.18.01.12
what’s new:

  • fixed an issue of different rings according to Alert-info (internal, external, blacklist, whitelist, silent)
  • Removed + sign from caller ID

 


Date 14.04.2017

sipproxy version 4.2.10.35167

[WMS-2676] – sys: fixed an issue with could cause high memory usage in some cases after upgrade to the latest stable version

Firmware
[WMS-2675] – dev: new firmware for WP410 – 50.145.6.74; WP480(G) – 55.145.6.71; WP490(G) – 59.145.6.103; WP480G 2017 – 63.145.7.41; wp490G 2017 – 67.145.7.32
fixed: no subscribe after “400 bad request” message
fixed: TLS connection issue (WMS-2430: PBX used wrong SSL certificate for phone registration on port 443 if customer uploaded a custom certificate)


Version 3.85.35101.15 Date 12.04.2017

New Features
[WMS-2372] – sys: added support for 2 factor authentication (2FA)
notes:
– available for Google Authenticator, Free OTP, Microsoft Authenticator or any other TOTP auth app
– available for Collaboration / WMS
– one-time password is valid for 90 seconds
– time on user device and on PBX should be synced according to time zones
– 2FA can be used for AD authentication
– 2FA can be enabled in user personal settings in Collaboration
limitations:
– WebAPI does not work if 2FA is enabled for user
– Integration Utility (TAPI driver) does not work if 2FA is enabled for user
– 2FA is not available for iOS / Android / WP600A apps
– login with 2FA is not available for Google / Office 365 single sign-on (it is supposed that user who doesn’t know his/her WMS password can use Google / Office 365 password)
– user can log in to a different PBX in WMS Network without 2FA even if 2FA is enabled
note: Google Authenticator / Free OTP apps doesn’t provide access pin, secret keys backup, sync or migration between devices, if you need such features, use other apps (e.g. Authy)

[WMS-2459] – dev: added default NPI support for PRI / BRI gateways
[WMS-2507] – sys: extended feature code “Hide Number” 92 with the possibility to activate / deactivate the service for all outgoing trunk calls
use 921 to activate / 920 to deactivate / 923 as auto-switch
service status change is shown as notification on the phone screen

[WMS-2527] – wms: added “Timeout” variable to Dialplan “Set” application
[WMS-2576] – sys: added direct RTP support between devices located in LAN networks larger than /24 behind the same router

Improvements
[WMS-2433] – col: improved geolocation reliability
[WMS-2453] – sys: unified call waiting tone repeat time on different devices (W01/02FXS,W24FXS 2015, W-AIR, WP 2015)
[WMS-2516] – wms: refactoring of NTP server page
[WMS-2544] – col: speeded up access to CDR-View for PBXs with over 200k phonebook contacts
[WMS-2548] – sys: WMS network Server replacement improvement

1. Move all users from Client (future Server)
2. Disable wms-network on this Client
3. Delete this Client from PBXs page on Server
4. Make a backup on Server
5. Apply this backup on Client

Fixes

[WMS-2499] – wms: fixed an issue with SIP user-agent containing “/“ not being notshown in Users menu
[WMS-2514] – sys: fixed an issue with VPN not activating after upgrade from WMS version 2.x to 3.x
[WMS-2555] – sys: ring tone set for phonebook contact is now applied also for calls to call groups
[WMS-2579] – wms: fixed an issue in which user preferences could not be saved from WMS if Popup URL field contained non-HTTP(S) link
[WMS-2592] – col: link to download call recording file in call history is now available also for call recording enabled via Dialplan
[WMS-2598] – col: fixed an issue in which drag&drop transfer could not be interrupted even if the phone number was deleted
[WMS-2615] – sys: fixed an issue in which CDR was off and domain was shown incorrectly in WMS after Cloud PBX first boot
[WMS-2628] – col: fixed an issue in which after SIP password change logout was needed to reconnect WebRTC phone
[WMS-2652] – col: fixed an issue in which CDR-View did not work in case access was made via WMP


Version 3.84.35087.12 Date: 07.04.2017

Fixes
[WMS-2482] – wms: fixed an issue in which “from user” field was not used during SIP trunk registration if “from domain” was empty
[WMS-2597] – col: fixed an issue in which calls via web phone did not work on per-user PBX with big number of user licenses
[WMS-2635] – sys: fixed an issue with custom application “gotoif” not working starting from beta version 3.84.34818.11
[WMS-2638] – sys: fixed wrong time on WP600 pre 2015 with new format of time zone setting


Version 3.84.35057.12 Date: 04.04.2017

Features
[WMS-2402] – col: auto set status to away after x minutes of inactivity on local Windows PC (beta)
[WMS-2571] – sys: disable return from transfer by default for United States and follow forwarding rules set by the user
[WMS-2602] – dev: show 12/24 time format on WP 2015 idle screen based on user settings

Improvements
[WMS-2573] – sys: new user features defaults
”Call Forward Busy / No Answer” are enabled by default with destination VOICEMAIL, external / whitelist / blacklist are disabled by default, “Mobility” is disabled (with timeout 10 seconds), “Call reject” is enabled by default for DND

Fixes
[WMS-2431] – sys: fixed call drop issue in some cases using call group strategy “call all 32” with the last stable release 3.83
[WMS-2488] – wms: fixed an issue in which multi editing of users preferences worked incorrectly for classes configuration
[WMS-2557] – sys: fixed an issue in which Wallboard could restart in some cases on Cloud PBX
[WMS-2609] – sys: fixed an issue in which BLF subscription stopped working if device sent retransmissions for longer than 5 seconds
[WMS-2611] – col: fixed an issue in which chats with users appeared again after being deleted from the “Recents” section after WMS release 3.84.34914.12
[WMS-2612] – sys: fixed an issue in which changes on feature codes page were not applied after pressing save button after WMS release 3.84.34728.10
[WMS-2617] – sys: force NTP zone Europe/Berlin in device NTP settings if in previous release time zone was set to GMT+1:00
[WMS-2619] – sys: fixed an issue in which calls via sip trunks might not work in some cases after WMS release 3.84.34728.10

Firmware
[WMS-2625] – dev: new firmwares for WP410 – 50.145.6.72; WP480(G) – 55.145.6.70; WP490(G) – 59.145.6.102; WP480G 2017 – 63.145.7.38
fixed an issue causing the phone to lose connection for a long time (>15 min) after changing WAN-IP or disconnection on the router’s WAN port in case of TCP/TLS connection

[WMS-2626] – dev: new firmwares for BRI/PRI/FXS version 2.0.38.717
what’s new: fixed an issue in which a BRI gateway could lose SIP registration after reboot


Version 3.84.35002.12 Date: 29.03.2017

Features
[WMS-2586] – wms: added per user licenses visualization
added correct amount of users / lines

Improvements
[WMS-2515] – wms: new line is present in contact name, is now removed during phonebook import
[WMS-2522] – wms: call group wrap up time by default is now set to 0
[WMS-2583] – col: added drag&drop over Function keys tab elements
supported function keys: colleague, park location, speed dial


Version 3.84.34914.12 Date: 21.03.2017

Features
[WMS-1834] – col: IBM notes / Domino integration
integration includes: call, presence, start chat
[WMS-2343] – dev: support for voicemail LED notification on W24FXS 2015
polarity reversal for phones supporting 90-volt neon MWI
[WMS-2568] – col: messages received / sent from other devices are now displayed in chat history of Collaboration

Improvements
[WMS-2443] – sys: remote phone can now play ringtone even if port 80 is closed on PBX
443 or custom secure port is used
[WMS-2503] – sys: features “ring only active device” and “set Mobility timeout to min 10 seconds in case user has an iOS/Android client connected” now work for Android and iOS apps with push notifications
[WMS-2543] – sys: improved POS / modem support over PRI / BRI media gateways
[WMS-2546] – sys: added SSH auto ban feature for Cloud / VM systems
[WMS-2565] – col: 16:9 format is now used for preview of images during file transfer
[WMS-2570] – col: Collaboration reconnection improvement

Fixes
[WMS-2509] – col: fixed an issue in which pressing shift-7 on MAC OS using French keyboard inside transfer dialog caused hangup
[WMS-2547] – col: fixed an issue in which user could not access Collaboration after changing password in WMS
[WMS-2550] – wms: fixed an issue with WMS upgrade procedure failing in some cases after WMS v. 3.84.34587.08
[WMS-2564] – sys: fixed crash which could occur in case user logged in to queue via WebAPI during an incoming call and tried to answer the call
[WMS-2572] – sys: fixed an issue in which audio calls with codec g729 from trunk might not work in some cases after WMS v. 3.83.34820.03

Firmware
[WMS-2529] – dev: new firmware for WP410 – 50.145.6.69; WP480(G) – 55.145.6.69; WP490(G) – 59.145.6.101; WP480G 2017 – 63.145.7.36
– translation improvements
– fixed XML Browser delay issue
– added support for selecting menu item by pressing digits
– added input of “+” by long pressing of “0”
– support of caller images on WP490G 2017


Version 3.84.34818.11 Date: 15.03.2017

Features

[WMS-2110] – wms: added Dialplan application “Jump to if”
added a drop-down list with four default options / possibility to enter your own option
[WMS-2319] – col: added support for CID name lookup in Outlook for incoming calls and from live search
Feature has been added to “Outlook integration”
[WMS-2373] – sys: added option “Allow only Single Sign-On” in Users Import
option added for AD / Domino; if enabled, login of users to Collaboration with WEB password is not possible

Improvements

[WMS-2381] – col: dialogs updated to material design
[WMS-2442] – sys: a syntax error present in custom application no longer prevents Dialplan procedure execution
[WMS-2448] – sys: improved USB initialization procedure
[WMS-2477] – sys: fixed web server deny of service issue in case of request with a big payload
[WMS-2479] – col: missed calls with “busy” status are now shown when filter for missed calls is applied in History
[WMS-2524] – sys: increased wait dial time for R+1 feature allowing users to end active calls on W24FXS 2015
[WMS-2539] – sys: spam DNS settings improvements

Fixes

[WMS-2329] – col: fixes an issue with “0” being prepended twice to called number with TAPI driver (IU) if Collaboration license was not enabled
[WMS-2435] – sys: fixed an issue in which it was impossible to change user of a single W-AIR phone, in case user had several W-AIR phones registered to a W-AIR Base SB
[WMS-2449] – col: fixed an issue in which it was difficult to select device in Collaboration since device list often closed automatically
[WMS-2457] – sys: fixed an issue in which Dialplan configuration could not be modified in some cases after WMS upgrade
[WMS-2472] – col: added speech recognition for chat with Kite users
[WMS-2473] – col: fixed an issue in which URL link was not clickable from chat after login from another PC
[WMS-2486] – sys: fixed wrong BRI / GSM / FXO trunk status for BLF keys
[WMS-2497] – sys: added possibility to use port 2222 for sync_pbx failover
[WMS-2498] – col: fixed issue in which Windows users whose user names contained umlauts and accents could not use CDR-View
new version of integration service available: 2.3.5
[WMS-2500] – sys: fixed video call issue from Chrome beta (ver 57) to WP600ACG
[WMS-2526] – sys: fixed wrong registration status for SIP trunk in some cases with last beta release 3.84.34728
[WMS-2531] – wms: fixed an issue in which users with type “room” were not added during CSV import
[WMS-2532] – sys: fixed high load on CPU on Devices page of WMS with over 500 devices
[WMS-2536] – wms: fixed an issue with “Play sound” application not working for files added by double click
[WMS-2552] – sys: fixed an issue with call classes recognition for W24FXS 2015 starting from WMS v. 3.83.33737.47


Version 3.84.34728.10 Date: 07.03.2017

Improvements
[WMS-2150] – sys: optimized usage of Callweaver resources
[WMS-2171] – sys: optimized Dialplan execution load
[WMS-2440] – col: graphical improvements
[WMS-2463] – sys: support of phonebooks over port 443 for W-AIR if no other secure port is set in SIP-RTP

Fixes
[WMS-2099] – sys: fixed wrong notification about new voicemail messages
(already in stable)
[WMS-2311] – sys: fixed an issue with fax sending being interrupted after some minutes using SIP trunk VoipVoice
(already in stable)
[WMS-2341] – sys: fixed an issue with Mail2SMS / Mail2Fax not working if mail did not contain content-type header
[WMS-2380] – dev: fixed an issue with call group pickup via BLF key not working correctly on pre 2015 WP starting from WMS v. 3.82
(already in stable)
[WMS-2441] – wms: fixed wrong visualization of call logs in Debug menu in some cases
[WMS-2468] – sys: fixed wrong matching of local networks that could lead to missing audio issue from remote device
[WMS-2476] – sys: fixed audio issue using Web Phone in case more than 1 network interface was active on PBX starting from WMS Beta v. 3.84.34526.07
[WMS-2483] – sys: fixed wrong notification about SIP trunk status starting from WMS Beta v. 3.84.34587.08

Firmware

[WMS-2464] – dev: new firmwares for BRI/PRI/(old)08FXS version 2.0.38.712
– fixed an issue with losing SIP registration after reboot in some cases (available also in stable)


Version 3.83.34626.03 Date: 28.02.2017

Improvements
[WMS-2386] – col: chat interface graphical improvements

Fixes
[WMS-2429] – sys: fixed an issue with push notifications not being delivered on iOS devices if delay between notifications was more than 2 hours
[WMS-2462] – col: fixed an issue with empty phonebooks after upgrade to WMS v. 3.83 in some cases
how-to-fix: upgrade to this version > apply backup > reboot PBX

Firmware
[WMS-2342] – dev: new firmwares for WP410 – 50.145.6.64; WP480(G) – 55.145.6.64; WP490(G) – 59.145.6.96
what’s new: XML browser speed improvement
WP490(G) 2015:
– fixed an issue with FW update from v. 59.145.6.8
WP480G 2017:
– minor improvements and fixes
– audio quality improvement
note: user pictures are not yet supported


Version 3.84.34587.08 Date: 24.02.2017

Features
[WMS-2313] – sys: new call continuity feature
“Continuity” *5 has been added to the “Services” section of Feature Codes
To enable the feature code, click “Save” on the Feature Codes page
How-to: during a call, dial *5 from one of the devices registered to your account, to pick up the call and continue the conversation from that device
limitation: feature does not work for Mobility and for calls in “ringing” state
note: old Continuity service is also supported (Feature Codes > Incall features > Continuity)

[WMS-2350] – wms: added menu for language & region settings
WMS Settings > PBX > Language & Region

[WMS-2397] – sys: added automatic notification to admin email in case SIP trunk is not registered
[WMS-2414] – sys: zabbix server sensors support
documentation: https://manuals.wildix.com/monitor-wildix-pbx-using-zabbix/

Improvements
[WMS-2172] – sys: automatic backup of sounds is now executed during scheduled backup to FTP / network share
[WMS-2384] – wms: “enable registration” parameter in SIP trunks with host “dynamic” is now “off” by default (applied for only newly added / edited trunks)
[WMS-2385] – col: “App integration” from Integration utility settings (TAPI driver) has been moved to Collaboration settings
notes:
in case previously configured, settings are available in read-only mode
now popup app must be configured in Collaboration Settings > Personal, “Popup URL / App”

[WMS-2399] – sys: fixed an issue with temporary loss of SIP trunk registration in some cases
[WMS-2401] – wms: “Auto Dect Tree” parameter has been moved to W-AIR networks parameters
[WMS-2420] – sys: possibility to use LAN interface for sync_pbx failover

Fixes
[WMS-2389] – sys: fixed call drop issue after semi-attended transfer to a call group
[WMS-2390] – sys: fixed wrong caller ID information after hold / resume
[WMS-2422] – sys: fixed wrong number normalization using hot dialing key on Windows / Mac OS
[WMS-2425] – sys: fixed an issue with license not being renewed on restart of callweaver in case of no Internet connection on HW PBX Per-user
[WMS-2436] – col: CDR-View fixes
fixed an issue in which some users were duplicated in search and search by surname did not work reliably
[WMS-2454] – sys: fixed an issue in which PBX could stop accepting incoming calls from SIP trunks in some cases after upgrade to WMS v. 3.83

Firmware
[WMS-2342] – dev: new firmwares for WP410 – 50.145.6.63; WP480(G) – 55.145.6.63; WP490(G) – 59.145.6.95; WP480G 2017 – 63.145.7.33

all phones:
– fixed an issue with phones registrar failover: in case Client PBX was unavailable, WP was generating sip-REGISTER after each packet from Server PBX.

-WP490(G):
– fixed an issue with FW update from v. 59.145.6.8

WP480G 2017:
– XML browser speed improvement
– minor improvements and fixes

– audio quality improvement

note: user pictures are not yet supported


Hotfix version Date 20.02.2017
sipproxy package v. 4.2.9.32544

[WMS-2432] – sys: fixed an issue where device selection in Collaboration might not work with the last Beta v. 3.84.34526.07
[WMS-2434] – wms: fixed an issue with provisioning of W-AIR Base SB not working with Beta v. 3.84.34412.06
[WMS-2439] – sys: fixed an issue in which NAT IP / received IP were not used for calls via SIP trunk starting from last Beta v. 3.84.34526.07


Version 3.84.34526.07 Date: 17.02.2017

Features
[WMS-1835] – sys: call / IM push notifications on Android mobile app
to enable:

  • upgrade Android app to the latest version
  • if you have already upgraded Android app to the latest version, you should restart the app after upgrade to this WMS version

on some devices push notifications are blocked by default, it’s necessary to manually allow push notifications for:

  • HUAWEI: Settings->Protected Apps, enable the option for Collaboration and restart the app
  • XIAOMI: Security->Autostart, enable the option for Collaboration and restart the app

to disable push notifications: log out from the app
for correct work of push notifications

    • a direct, unproxied connection to the Google Cloud Messaging server on ports 5228, 5229 and 5230 from smartphone is necessary
    • PBX must be connected to the internet and be able to communicate with push.wildix.com server

Limitation: chat messages won’t be delivered if they contain more than 900 symbols

[WMS-2321] – sys: added support for diversion – history-info headers for SIP trunks
[WMS-2327] – wms: added search to call group / IVR / Timetable / switch / 3 state switch menu
[WMS-2348] – wms: added option to set up default prefix for feature / service codes (for example *)
in WMS > Dialplan > Feature codes
[WMS-2352] – dev: enabled G729 for W-AIR SB

Improvements
[WMS-2157] – sys: support for callkit, pushkit, sirikit and IM push notifications for iOS app

  • note: in case you do not update your iOS device to this beta version, for current work of old push notifications (incoming / missed calls), after updating the PBX to this beta, restart the Wildix iOS app

[WMS-2235] – wms: show networking parameters in “read only” mode for Virtual systems
[WMS-2316] – sys: improvements for feature codes management
shortcuts format to set up feature codes:

  • *1/0/3* – enable/disable/autoswitch feature for specified call class
  • *2** – set up value for specified feature (like timeout or destination number, if destination number is empty, Voicemail is applied)
  • *1/0 – enable/disable feature for all available classes
  • *2* – set up feature value for all available classes
  • *3 – enable feature for all available classes if feature is disabled for at lease 1 call class/disable feature for all available classes if feature is enabled for all available classes

notes:

  • when Feature code status is changed, current additional value is no longer deleted (like destination number or timeout)
  • when calling to using IVR menu, status change is applied for internal call class only.

[WMS-2330] – col: video conference join improvements
note: closing the conference by user who created it, does not destroy the conference room
[WMS-2336] – dev: added tone zone setting for 01-02 FXS gateways
WMS Devices > Edit
[WMS-2355] – col: reduced min frequency of call waiting beeps in case of many incoming calls
[WMS-2364] – col: show full user status as tooltip in live search and chat contact detail
[WMS-2388] – sys: the system allows the last call group member to leave the group after notifying the user that he/she is the last one

Fixes
[WMS-2046] – sys: fixed an issue in which video could freeze from time to time during calls between WebRTC web phones
[WMS-2383] – sys: fixed an issue in which SMS sending through remote PBX did not work for missed call notifications
[WMS-2391] – sys: improvement for BLF labels visualization for WP480G 2017
[WMS-2392] – sys: added enabling DND status by long-pressing on a star * key for WP480G 2017
[WMS-2394] – sys: fixed calls interruption issue using Web Phone in some cases
[WMS-2395] – wms: fixed an issue with duplicated call groups in WMS > Dialplan > Call groups after editing a call group
[WMS-2409] – sys: fixed an issue in which BLF and voicemail notifications did not work reliably if PBX DNS server was not used after update to version 3.83
[WMS-2410] – col: fixed an issue with login via Google account using Wildix Collaboration app
[WMS-2417] – col: fixed an issue in which it was impossible to change features in Wildix iOS app on iOS 10


Important: after upgrading to this version it will be impossible to go back to 3.83.x
Version: 3.84.34412.06 Date: 08.02.2017

Features
[WMS-2056] – col: new file / image sharing
what’s new?
– file sharing on browsers not supporting point-to-point file transfer (IE, Edge, Safari)
– file preview
– file size: max 100Mb
– for files bigger than 100Mb, p2p file sharing is used on supported browser (Chrome)
– support for iOS / Android is coming later with new apps versions

[WMS-2184] – col: added date and time format parameter for the US market (Settings > Personal)
Note: W-AIR handsets have their own settings for time/date format and it has to be set manually on a handset

[WMS-2216] – dev: support for multi site W-AIR installations with local PBX
– enables the possibility to create W-AIR network between different sites of the company connected via VPN, where all the bases are provisioned to the Server PBX while W-AIR handsets are registered to local PBXs and it’s possible to travel between the sites of the company without having to re-register the handsets
– added 2 new parameters in Devices > W-AIR Networks -> Edit network: “SIP Proxy” (optional, by default, provisioning domain, “auto.wildixin.com”) and “Primary Base IP” (optional, to be used for cloud installations)

[WMS-2226] – api: added call history to vTiger web app
[WMS-2262] – col: updated chat window design
[WMS-2263] – col: added auto logoff in case two sessions are open
[WMS-2281] – col: support for pop-up and user personal pictures in Outlook
– clicking on a link opens an existing contact or creates a new one
– note: Outlook must be running

Improvements
[WMS-2132] – wms: refactoring and design improvements of the SMTP client page
[WMS-2180] – sys: interdigit timeout is now applied for feature codes “read” timeout
[WMS-2353] – dev: improved DST feature for W-AIR bases

Fixes
[WMS-2282] – sys: fixed an issue with return from transfer not working during pre-answer services for semi-attended transfer
[WMS-2304] – col: fixed an issue with incoming faxes received using Dialplan application “detect fax” being displayed in history in red color
[WMS-2349] – sys: security improvement for internal SMTP client on cloud PBXs
[WMS-2358] – col: chat tab now longer opens automatically in case of incoming file
[WMS-2368] – sys: fixed paging call pickup issue
[WMS-2376] – col: microphone usage permission is no longer asked even if no Collaboration license is available
[WMS-2377] – col: fixed an issue with voicemail tab being displayed (and showing no entries) in some cases even if Collaboration was not available
[WMS-2379] – sys: fixed an issue with system not starting after 2nd execute of recovery procedure

Firmware
[WMS-2378] – dev: new firmware for W04FXO/W04FXS v. 5.01i
Fixed an issue in which W04FXS in some cases could not accept incoming calls using click2call feature in Collaboration


Version 3.83.34360.03 Date: 01/02/2017

Improvement
[WMS-2297] – sys: play music on hold instead of ringback after attended transfer to Park Location user

Fixes
[WMS-2293] – col: fixed an issue where in some rare cases chat messages were never marked as read
[WMS-2338] – col: fixed an issue with some chat messages not being displayed in history
[WMS-2357] – dev: corrected a misprint in WP XML browser in Italian
[WMS-2361] – sys: fixed an issue with audio and visual BLF keys not working after upgrade to the last stable v. 3.82


Version 3.83.34297.03 Date: 27/01/2017

Feature

[WMS-2168] – sys: device selection feature
notes:
– added option “ring only active device” – it is “on” by default for all users
– added feature code “Ring only active device” (68)
– to disable the option: dial 68*0
– during an incoming call only the selected device rings, other devices registered to the account receive a silent call
– if the previously selected device is offline all the registered devices ring

 

Improvement

[WMS-2328] – col: added the possibility to add one call to an audio conference and new calls to existing audio conferences

 

Fixes

[WMS-2326] – sys: added fixes ensuring Web phone compatibility with Chrome 57 (dev)
[WMS-2329] – col: fixes an issue with “0” being prepended twice to called number with TAPI driver (IU) if Collaboration license was not enabled
[WMS-2337] – sys: fixed missing “cn={4}wildix.ldif” file during LDAP upgrade reproducing in some cases
[WMS-2345] – sys: fixed an issue with users receiving offline email notifications for Kite chats which had been read or transferred


Version 3.83.34260.03 Date: 25/01/2017

Feature:
[WMS-2221] – sys: added sign-on of users and import contacts via Lotus Domino

Improvements
[WMS-2189] – sys: SIP trunk configuration is now automatically reloaded after changing of Public IP address
[WMS-2286] – dev: improved BLF label visualization on WP 2015
only user name is now displayed
[WMS-2308] – sys: increased certificate rating
[WMS-2310] – sys: improved Premium call class for Germany
numbers starting with “180” are now considered Premium 2

Fixes
[WMS-2003] – dev: GUI translation corrections of WP4X0
[WMS-2276] – sys: fixed an issue with Mail2Fax not working in some cases using multi-function printer
[WMS-2280] – sys: fixed wrong status in fax delivery report if 0 pages were sent
[WMS-2294] – sys: trunk status monitoring via BLF key on WP4XX / WP600AXX now works correctly
[WMS-2307] – sys: updated DNS info for wildixin.com
[WMS-2320] – sys: fixed an issue with impossibility to access phonebook on WP 2015 using MySQL in some cases

Firmware
[WMS-2309] – dev: new FW for W-AIR Base and W-AIR Base SB v. 03.55.00.24
what’s new: Fixed wrong port used in XML phonebook in case secure port is greater than
32700

[WMS-2257] – dev: new FW for W24FXS 2015 v. 27.18.01.11
what’s new:
– Fixed DTMF delay issue
– Changed the call waiting tone mode (it is now configurable on web page)


Version 3.83.34146.02 Date: 17/01/2017

Feature
[WMS-2192] – col: added timetables / switches / trunks BLF for monitoring via Function keys menu

Improvements
[WMS-2027] – col: screen sharing improvements
what’s new:
– try reconnecting to the remote desktop if connection was lost on the viewer’s side
– show progress bar during reconnection on the viewer’s side
– minor design and usability improvements

[WMS-2287] – col: “0” is now removed from called number if preceded by international prefix when using hot key dialing

Fixes
[WMS-2145] – wms: fixed an issue with provisioning of WP410 2015 not working via HTTPS with FW v. below 50.145.6.41
[WMS-2241] – sys: fixed an issue with attended transfer not working for calls received on call group starting from WMS Beta v. 3.83.33639.45
[WMS-2254] – sys: fixed wrong missed call notification in case of multiple Dialplan applications “Call group” starting from WMS v. 3.82.33883.40
[WMS-2273] – col: fixed an issue with inactive call transfer button for calls answered on call group starting from WMS Beta v. 3.83.33639.45
[WMS-2317] – sys: fixed an issue with trunk limit due to which in some rare cases it was impossible to make more than 1 call on trunk
[WMS-2318] – sys: fixed an issue with NAT IP / received IP not being used for outgoing calls via SIP trunk after WMS v. 3.83.33737.47

Firmware

[WMS-2295] – dev: new firmware for WP410 2015 v. 50.145.6.54; WP480(G) 2015 v. 55.145.6.59; WP490(G) 2015 v. 59.145.6.84
what’s new:
WP410, WP480(G), WP490(G):

  • Translations and menu usability improvements
  • Pressing “Colleague” BLF during an active call no longer performs call pickup, but transfer (example: previously when pressing a blinking=“ringing” BLF during a call performed call pickup instead of transfer)
  • CID is now correctly displayed on the phone screen in case phone user calls Feature Codes from Web Phone
  • Fixed processing of REFER in case of calling not existing number
  • BLF statuses are now correctly indicated also for the 2nd and the 3rd page (both the screen, and the BLF lamp itself show the statuses information for the currently selected page)

WP490(G) only:

  • Fixed delay issue during live search

 


Hotfix date: 28/12/2016

[WMS-2291] – sys: fixed an issue with upgrade from rel340 to rel380 not working on old PBXs due to missing free space


Version 3.83.34040.51 Date: 26/12/2016

New Features

[WMS-2220] – wms: added support for device connection via portal
[WMS-2228] – dev: W04FXO support for China Telecom

Improvements
[WMS-2167] – wms: when “Auto discover external IP” option is enabled in SIP-RTP, external IP is now displayed in real time without the need to refresh the web page
[WMS-2278] – sys: power LED is now off by default for WP 2015
[WMS-2279] – sys: added new provisioning parameters for PRI gateway for the USA compatibility

Fixes

[WMS-2230] – col: fixed an issue with missing call popup after applying backup on PBX in WMS network
[WMS-2283] – sys: fixed an issue in which music on hold did not work in some cases execute executing PBX sync replication script
[WMS-2284] – sys: support for wildixin.com domain for DNS failover


Version 3.83.34015.51 Date: 20/12/2016

New Features

[WMS-2137] – sys: added option to archive / delete calls in WP phones and Collaboration
note: it’s possible to archive/delete calls from Collaboration History; restrict users from deleting calls via ACL “cannot” – “delete calls”
[WMS-2258] – api: added support for sign-on via Active Directory and login via username / email / name

Improvements

[WMS-2179] – sys: feature code status is now changed for all active classes if user does not specify call class with feature code
how-to:
change feature code for specific call class: enter a string in format 61*1*0, where 61 is Feature code (Busy call forward), 1 is “enable”, 0 is “internal” call class, and send a call
change feature code for all active call classes: enter a string in format 61*1 (without specifying call class), or call feature code 61 and follow audio instructions
notes: 0 – internal, 1 – external, 2 – blacklist, 3 – whitelist call classes

[WMS-2250] – col: duration of “auto login” feature extended to 15 days

Fixes

[WMS-1978] – wms: fixed an issue in which it was impossible to access WMS interface in case of slow CDR MySQL connection
[WMS-2212] – col: fixed an issue in which ringtone continued playing in case connection to PBX was lost during an incoming call
[WMS-2252] – col: fixed an issue with failed file transfer in case browsers could not exchange data directly (browser has not been reloaded for a long time)
[WMS-2270] – col: fixed an issue in which call history / CDR-View did not work if custom port was set in MySQL / MSSQL CDR settings


Version 3.83.33987.50 Date: 16/12/2016

Features
[WMS-1966] – api: alert call support for any Dialplan execution in place of hang up
[WMS-2107] – sys: support TAPI driver actions over WMS network
[WMS-2200] – sys: added sensors for number of calls, phone users, Collaboration users

Improvements
[WMS-2185] – sys: date and time is now shown in call history on WP 2015
[WMS-2234] – dev: registration expire for W-AIR base is now set to 600 s
[WMS-2251] – sys: added temperature sensor / SSD life for PBXs
[WMS-2256] – sys: Mail2SMS now works also in case SMS body is entered in the same line as the field “Message”
[WMS-2268] – sys: correct call class recognition for French telephone prefix 09

Fixes
[WMS-2214] – sys: performance and stability improvements (already in stable)
[WMS-2246] – sys: fixed an issue with missing caller name for calls received from mobility introduced in WMS v. 3.83.33737.47
[WMS-2264] – wms: fixed an issue in which it was impossible to enable Chat history and sync option with MySQL server 5.7 (already in stable)
[WMS-2267] – sys: fixed an issue with offline messaging not working for messages sent from Android app
[WMS-2271] – sys: fixed an issue in which NAT IP parameter in SIP trunk was not used after PBX reboot (already in stable)
[WMS-2275] – sys: fixed memory leak in DHCP client script (already in stable)

Firmware
[WMS-2274] – dev: new firmware for PRI, W08-24FXS, version 2.0.135.700 (already in stable)
what’s new:
– fixed an issue with losing SIP registration after reboot
– fixed an issue with W08-24FXS not being able to handle more than 6 concurrent calls


Version 3.83.33916.49 Date: 12/12/2016

Improvement
[WMS-2190] – col: graphical and usability improvements

Fixes
[WMS-2182] – sys: fixed an issue in which calls did not work due to missing DNS entry auto.wildix.com for LAN interface of PBX
[WMS-2218] – col: fixed an issue in which popup notification remained after answering a call
[WMS-2222] – sys: fixed missing voice message when calling a full mailbox
[WMS-2227] – col: fixed an issue with empty call history in Collaboration using Sqlite CDR on old HW PBX
[WMS-2231] – sys: set default nameserver in case of Cloud PBX to avoid an issue with some services not working correctly due to wrong value
[WMS-2245] – col: fixed an issue in which user preferences could not be saved in WMS if function key label contained special characters

Firmware
[WMS-2255] – dev: new firmware for WP410 2015 v. 50.145.6.50; WP480(G) 2015 v. 55.145.6.57; WP490(G) 2015 v. 59.145.6.73
what’s new: added support of DHCP-Decline message


Version 3.83.33871.48 Date: 05/12/2016

New Features
[WMS-2012] – col: added system shortcuts to allow opening of Collaboration and Attendant console from any application
Install Integration service in Settings > Extensions and set up shortcut in Settings > Personal (Image 1)
[WMS-2038] – wms: added support for concatenation of strings during phonebook / users import
[WMS-2039] – wms: added import of “other contacts” phonebooks from Office 365
[WMS-2069] – col: sound playback improvement for user ringtones
[WMS-2083] – col: added link to documentation (Other > Help) (Image 2)
[WMS-2109] – sys: dial by name feature
Notes:

  • feature works only for EN-US language
  • feature is available via IVR (added Dialplan application “Dial by name / directory”) or phone phonebook search
  • added ACL “cannot” – “be via lookup via dial by name”
  • In order to be looked up via this feature, users must have their Name recorded in Voicemail (call 81, select 0, select 3 to record your name)

Improvements

[WMS-2104] – wms: added internal call class to the list for ACL rule “cannot call”
[WMS-2106] – sys: improved Austria / Netherlands call classes and added Luxembourg
[WMS-2116] – col: improved Kuando notifications
What’s new:

  • use call status from PBX instead of headset integration
  • red color for calls / notifications instead of blue
  • violet color for DND
  • steady red color for busy on the phone
  • busy and ringing on the phone red color and quick off (opposite color of incoming status)
  • blinking red in case of incoming call when busy on the phone

[WMS-2211] – sys: added Dialplan global variable VOICEMAIL_DELETE=X allowing auto deletion of voicemails after X days.
[WMS-2232] – col: fixed an issue with call interruptions in webrtc phone after hold in case of big network delays
[WMS-2237] – sys: added global Dialplan variable HIDE_DTMF=yes used to disable visualization of DTMFs on the display of WP (by default DTMFs are now shown on the display)
List of Dialplan variables: https://manuals.wildix.com/custom-global-dialplan-variables/

Fixes

[WMS-2048] – sys: fixed an issue with assigning a missed call to wrong user if call group strategy is different from “call all”
[WMS-2124] – sys: fixed no audio issue on remote Wildix devices if SIP ALG was active and third party devices were connected
[WMS-2175] – sys: fixed an issue with displaying extension number instead of office number during call forward to external number
[WMS-2181] – col: fixed an issue with chart export in CDR-View
[WMS-2196] – sys: fixed an issue in which “deny unknown clients” resulted disabled by default in DHCP settings after PBX reboot
[WMS-2198] – sys: fixed missing call notifications via email for external call class
[WMS-2219] – col: fixed an issue in which feature keys tab disappeared after page refresh using Firefox
[WMS-2223] – wms: added support for T1 PRI ports on Trunks page
[WMS-2244] – sys: fixed an issue with missing ringback on W24FXS in some cases

Firmware

[WMS-2233] – sys: new firmware version 04_5_01h for W04FXO
Fixed an issue in which lines remained occupied in some scenarios using Fastweb operator
[WMS-2238] – dev: new FW version 2.0.135.700 for W0XBRI
What’s new:

  • fixed an issue with losing SIP registration after reboot
  • fixed an issue with W04BRI not being able to handle more than 6 concurrent calls

[WMS-2188] – dev: new firmware for WP410 2015 v. 50.145.6.48; WP480(G) 2015 v. 55.145.6.55; WP490(G) 2015 v. 59.145.6.70
fixed an issue with phone losing subscriptions after reboot


Version 3.83.33737.47 Date: 22/11/2016

New Features

[WMS-1612] – sys: added call classes support for US and Canada
[WMS-1682] – col: added Outlook presence and click2call integration
[WMS-1760] – sys: support of DST and timezone for FXS media gateways
[WMS-1831] – sys: support per PBX crypto key for encryption of signalling on W01/02FXS
[WMS-1886] – wms: added disconnection reason parameter to hang up application
[WMS-1892] – wms: office 365 users import and sign on
[WMS-1893] – sys: add support for admin / user level DTMF actions and mute all during PBX audio conference
note: added conference IVR menu with following options (pressing keys during conference)
*1 – Toggles mute on and off of the current user
*2 – Exit the conference
*3 – Allows the Admin to mute/unmute all other participants
Admin can be set by calling the conference number like user callerID or via Dialplan by variable
Set(CONFBRIDGE(user,admin)=yes)

[WMS-1902] – col: Collaboration is now automatically opened when actions are requested by Windows / Mac integration service
[WMS-1941] – sys: added support for local time visualization in history and Voicemail for WP 2015
[WMS-1948] – api: isRecorded() now returns “true” also for system started recordings
[WMS-1949] – col: added support for custom contact ringtone in phonebook
[WMS-1958] – wms: added option rport in trunks configuration
[WMS-1959] – col: support for copy and paste in DTMF dialog
[WMS-2007] – col: kuando busylight integration
more info: https://www.wildix.com/portfolios/kuando-busylight/
[WMS-2028] – sys: tags variable can now be referred as ${TAGS}
[WMS-2126] – sys: MTR tool is now installed by default on PBXs

Improvements

[WMS-1854] – sys: use correct PBX contact address instead of Wildix in “notify” messages sent to devices
[WMS-1895] – sys: support of more than 1 simultaneous mobility call
[WMS-1937] – sys: start whoteld via unprivileged user
[WMS-1951] – col: translation improvements
[WMS-2018] – wms: added option to enable wideband codec in SIP-RTP for Cloud PBXs
[WMS-2020] – col: increased max height to improve call dialogs visualization
[WMS-2025] – col: all available phone numbers of contact are now displayed in live search in Attendant Console
[WMS-2030] – sys: improved system recovery menu
[WMS-2032] – col: added DTMF confirmation sounds
[WMS-2045] – sys: WP Dutch translation improvements
[WMS-2051] – sys: simplified AGI scripts creation
example: https://manuals.wildix.com/dialplan-applications/#other
[WMS-2075] – col: added region Trentino-Alto Adige for Italy in phonebook
[WMS-2077] – sys: improved monitoring system for customer PBXs
[WMS-2080] – col: it’s now possible to access CDR-View even if port 8888 is used by another program on local PC
[WMS-2082] – col: make phonebook short numbers dialable
[WMS-2111] – sys: auto delete old call recording files on VM / HW PBXs (if space usage is > 95%)
[WMS-2118] – col: value entered in “period” filter is no longer erased when “update” button is pressed in CDR-View
[WMS-2122] – sys: WP4X0 English and German translations improvements
[WMS-2147] – wms: trunks are now displayed in alphabetical order in Dialplan application “dial the trunk”
[WMS-2148] – sys: disabled TFTPD server
[WMS-2161] – dev: improved caller ID support for W24FXS 2015
[WMS-2163] – wms: show DCHP server settings for VM in chroot environment
[WMS-2176] – sys: added en-us language to Dialplan application “Set”
Fixes

[WMS-1947] – sys: fixed memory usage and fragmentation issues
[WMS-1962] – sys: semi-attendant transfer to user with mobility enabled now works correctly
[WMS-1978] – wms: fixed an issue in which it was impossible to access WMS due to slow connection to CDR MySQL
[WMS-2001] – sys: fixed missing trunk info for answered calls in CSV export
[WMS-2006] – col: fixed an issue in which it was impossible to call a conference via Google extension from Email invitation
[WMS-2008] – sys: fixed an issue with empty regstatedb in some cases
[WMS-2016] – wms: fixed wrong visualization of IP registration source for remote devices in users / devices menu
[WMS-2031] – sys: fixed black screen on WP600AXX after call is put on hold in some cases
[WMS-2043] – sys: improved Voicemail menu usability
[WMS-2050] – sys: fixed an issue in which SSRC could be changed even in case “force static SSRC” option was enabled in SIP trunk settings
[WMS-2053] – col: * and # can now be used in a number during transfer
[WMS-2054] – wms: global park timeout is now working correctly
[WMS-2055] – sys: fixed an issue in which it was impossible to change user status to “away” using feature code 602
[WMS-2057] – wms: fixed an issue in which after license activation some WMS menus could remain disabled
[WMS-2060] – sys: Dialplan application “verify number of calls” for outgoing calls to trunk now works correctly
[WMS-2061] – sys: fixed an issue in which trunk with transport “auto” (dns ptr-srv) did not work in some cases
[WMS-2063] – sys: fixed an issue in which PBX with hotel integration did not process DND event from bticino/fidelio software in correct way
[WMS-2065] – sys: fixed an issue with wms_parsemail not recognizing email address in some cases
[WMS-2067] – col: fixed wrong French translation in CDR-view menu
[WMS-2070] – sys: fixed an issue with call completion not working in some cases
[WMS-2079] – wms: translations improvements
[WMS-2091] – col: fixed an issue in which it was impossible to send fax using fax cover with company logo in wrong format
[WMS-2096] – col: full time and date details for today’s events are now displayed in call history
[WMS-2098] – col: fixed an issue with video still streaming in case call is on hold
[WMS-2099] – sys: fixed wrong notification about new voicemail messages
[WMS-2101] – sys: option “playback tones while entering number” now works correctly for WP 2015
[WMS-2108] – sys: support of paging on different network (2n support)
[WMS-2115] – col: fixed voicemail management issue after PBX connection was lost
[WMS-2128] – col: groups are now displayed in alpha numerical order
[WMS-2129] – sys: lookup in specific phonebook now works correctly using Dialplan application “Lookup caller name in phonebook”
[WMS-2140] – sys: fixed an issue with DNS failover not working because devices used IP address instead of domain *wildixin.com during provisioning
[WMS-2142] – col: fixed an issue in which it was impossible to edit colleagues list in collaboration if ACL rule “cannot view everybody” was applied
[WMS-2146] – col: fixed an issue in which it was impossible to resume a call on hold does using web phone in case two calls were present
[WMS-2149] – col: fixed an issue with impossibility to call a contact in case name contained not closed parenthesis
[WMS-2156] – col: fixed an issue with some messages being displayed as unread each time after history exchange on mobile applications
Firmware

[WMS-2173] – dev: new firmware for WP410 2015 ver. 50.145.6.47; WP480(G) 2015 ver. 55.145.6.54; WP490(G) 2015 ver. 59.145.6.69
WP410:
1) Fixed DHCP issue: phone did not send DHCP-Request after reboot in some cases.
2) Fixed voicemail issue: phone did not send voicemail subscription according to configuration.

WP480(G):
1) Fixed: BLF pickup does not work if handset is picked up.
2) Fixed DHCP issue: phone did not send DHCP-Request after reboot in some cases.
3) Fixed voicemail issue: phone did not send voicemail subscription according to configuration.

WP490(G):
1) Fixed: BLF pickup does not work if handset is picked up.
2) Fixed DHCP issue: phone did not send DHCP-Request after reboot in some cases.
3) Fixed voicemail issue: phone did not send voicemail subscription according to configuration.


Version 3.82.33693.40 Date: 17/11/2016

[WMS-2163] – wms: DHCP server settings is now displayed for VM in chroot environment


Version 3.82.33671.40 Date: 16/11/2016

Features

[WMS-2126] sys: install by default MTR tool on pbxs
[WMS-2077] sys: new monitoring system for customer PBXs

Fix

[WMS-2146] – col: fixed an issue in which resuming a call on hold from Web phone did not work in case when there were two active calls (HOTFIX)


Version 3.82.33618.40 Date: 10/11/2016

Feature

[WMS-1786] – sys: support and enforce number of users in license file

Fixes

[WMS-1910] – sys: fixed an issue with some storage devices not being mounted on Cloud PBXs after reboot
[WMS-2029] – sys: correction of WMS sound “vm-no” in Dutch
[WMS-2073] – sys: fixed an issue in which assign user and re-provisioning did not work for W02FXS
[WMS-2074] – wms: added more info for logs displayed during a test with SMTP and Fax/SMS Server profile
[WMS-2134] – sys: fixed an issue with Dialplan application “Voicemail access” not working for calls received from trunk starting from WMS stable v. 3.82.33259.40


Hotfix version 3.82.33586.40 Date: 09/11/2016

[WMS-2059] – col: fixed console error occurring in case calls were started immediately with video
[WMS-2085] – sys: fixed an issue in which it was impossible to enable external connections to LDAP after WMS v. 3.82.33025.38
[WMS-2114] – sys: fixed an issue in which Voicemail access in some cases did not work for user with German language due to a missing sound file
[WMS-2117] – col: fixed an issue with some phonebooks not being displayed in Collaboration in some rare cases
[WMS-2121] – sys: fixed an issue in which remote support autostart configuration file had wrong permissions on some PBXs


Hotfix version 3.82.33541.40 Date: 04/11/2016

[WMS-2072] – sys: fixed call hangup issue during fax sending from W01FXS using SIP trunk VoipVoice
[WMS-2089] – col: fixed an issue in which live search menu disappeared when user received a second call
[WMS-2090] – sys: fixed an issue with PBX not processing incoming DNS requests starting from WMS stable 3.82.33420.40


Version 3.82.33491.40 Date: 01/11/2016

[WMS-2084] – web: fixed an issue with imported phonebook contacts being removed after test import


Version 3.82.33483.40 Date: 01/11/2016

Feature

[WMS-2036] – col: use external line prefix for calls from Windows / Mac OS x Integration Utility / Chrome extension

Fix

[WMS-2066] – col: fixed websocket disconnection issue when enabling video call in case too many networks interfaces are active on PC


Version 3.82.33465.40 Date: 28/10/2016

Fixes

[WMS-1989] – col: video calls speed improvement between WebRTCphone (Chrome) and Mobotix doorphone
[WMS-2058] – col: fixed an issue in which video did not start, in case user called himself / herself from iOS to WebRTC phone unless he/she turned on video on both devices
[WMS-2076] – sys: fixed an issue in which WMS network configuration could be lost in some cases after upgrade


Version 3.82.33444.40 Date: 28/10/2016

Fixes

[WMS-2023] – col: fixed an issue with slow live search in case of large phonebooks
[WMS-2049] – wms: fixed an issue in which video sometimes could not not received in Collaboration if g722 support was enabled

Firmware

[WMS-2026] – dev: new firmware for WP410 2015 ver. 50.145.6.46; WP480(G) 2015 ver. 55.145.6.52, WP490(G) 2015 ver. 59.145.6.66
what’s new:

WP410:
– speed up of provisioning

WP480/WP480G:
– fixed: phone does not display “MUTE” icon in case changing the ringtone volume from audio settings -> option submenu.
– network initialization is no longer started in case of no network change was done (example: change in BLF configuration no longer restarts Network settings)
– speed up of provisioning

WP490/WP490G:
– speed up of provisioning
– BLF keys from 2nd page are now executable by screen buttons

[WMS-2035] – dev: new firmware for W04FXO/W04FXS ver. 5.01g
W04FXS:
– added short ring detection
– added support of custom ringtone patterns


Version 3.82.33420.40 Date: 26/10/2016

Feature

[WMS-1950] – kit: send chat transcript by email after chat is over

Improvement

[WMS-2002] – col: attendant console additional improvements
what’s new: increased number of displayed contacts in live search; improved blind transfer from hotkey on some keyboards

Fixes

[WMS-1995] – sys: fixed an issue in which office number was used instead of original caller number during external call forward starting from WMS stable 3.82.33259.40
[WMS-1999] – col: fixed an issue with live search in call dialog displaying only some of available contacts
[WMS-2017] – col: fixed an issue in which user could see his or her own chat in some cases
[WMS-2022] – wms: fixed an issue with CardDAV sync not working in case of Active Directory sign-on
[WMS-2041] – sys: fixed an issue in which user could not make a call to himself/herself with call waiting disabled starting from WMS stable 3.82.33287.40
[WMS-2052] – sys: fixed an issue in which queue member could receive more than 1 call at a time with call all 32 strategy even if call waiting was disabled


Version 3.82.33371.40 Date: 21/10/2016

Fixes

[WMS-1998] – col: fixed an issue in which live search displayed wrong user’s number in SMS field
(not the number specified in “Mobile” field)
[WMS-1987] – col: improvement of automatic conversion of symbol combinations into emoticons


Version 3.82.33358.40 Date: 20/10/2016

New Features

[WMS-1873] – sys: update licence management to support latest Centos / Debian versions
[WMS-1900] – dev: added an option for W-AIR Base “Auto Dect Tree” in “Edit” device (“on” by default)

Improvements

[WMS-1780] – sys: added the possibility to use non-standard connection port for WMS Network

Fixes

[WMS-1881] – sys: fixed an issue in which it was impossible to make blind transfer of a call answered with Dialplan application “Mobility extension lookup”
[WMS-2015] – sys: corrected a misprint in missed call email notification in Dutch
[WMS-2021] – sys: fixed an issue in which dial tone was interrupted for WP410 after update to WMS v. 3.82.33259.40


Version 3.82.33319.40 Date: 18/10/2016

Fixes

[WMS-2005] – sys: fixed an issue in which provisioning of W-AIR Base SB did not work with firmware v. 3.23 and the last stable v. 3.82.33259.40
[WMS-2010] – sys: fixed an issue with slow start of ejabberd
[WMS-2011] – wms: fixed an issue with custom DND feature code set to default after upgrade to the last stable v. 3.82.33259.40


Version 3.82.33295.40 Date: 17/10/2016

Improvements

[WMS-1940] – col: improved audio chat notifications
notes: audio notifications are now disabled when chat window is open; reduced the number of notifications per minute
[WMS-1972] – col: incoming calls notifications are no longer grouped
[WMS-1976] – col: added video button to video / call dialogs to improve usability

Fixes

[WMS-1883] – sys: fixed an issue in which second blind transfer using web phone did not not work after first attended transfer of the same call
[WMS-1889] – sys: fixed an issue with incorrect call group statistics
[WMS-1994] – sys: increased interval for XMPP Monit check


Version 3.82.33259.40 Date: 11/10/2016

New Feature

[WMS-1616] – sys: support of paging over RTP multicast and SIP calls
notes:
Pre 2010 PBXs receive 6 SIP paging calls + RTP multicast
New PBXes receive 15 SIP paging calls + RTP multicast
Priorities:
1) WP
2) W-AIR
3) Web
4) others
To pickup paging use FC 91

Improvements

[WMS-1942] – sys: support pick up via replaces
note: this improves pick up management on 3rd party phones allowing to pick up a particular call
[WMS-1970] – sys: improved memory usage for low memory PBXs

Fixes

[WMS-1975] – col: fixed issue with video calls between Chrome WebRTC Phone and Mobotix doorphone
[WMS-1988] – sys: fixed issue with phone login using feature code 99 introduced in WMS v. 3.82.33236.40 (hotfix)

Firmware

[WMS-1990] – dev: new firmware for WP410 2015 ver. 50.145.6.45
what’s new:
– added an option allowing you to select Ringtone Output in Menu > Audio > Option (Handsfree\Headset)
– fixed an issue in which under certain circumstances, ringtone volume could go back to default
– network initialization is no longer started in case of no network change was done (example: change in BLF configuration no longer restarts Network settings)


Version 3.82.33236.40 Date: 10/10/2016

Improvement

[WMS-1930] – wms: hide Networking, DHCP server settings in chroot environment
list of services and ports used – LINK

Fixes

[WMS-1943] – sys: fixed silent ringtone issue in some cases when received 2 consecutive calls
[WMS-1973] – col: fixed an issue in which audio was switched from selected device to default device after video activation in Web Phone
[WMS-1974] – wms: fixed an issue with Active Directory sign-on option being disabled after upgrade to v. 3.82.33160.40


Version 3.82.33223.40 Date: 07/10/2016

Improvements

[WMS-1837] – dev: automatic reboot of W04FXO after change of impedance in FXO trunk settings
[WMS-1870] – sys: added option to enable announcement of date / time / caller phone number for Voicemail messages (General Dialplan settings)
[WMS-1946] – web: ACL group default no longer blocks access to event history
[WMS-1955] – col: Attendant Console improvements (search and blind transfer improvements)

Fixes

[WMS-1933] – wms: fixed wrong visualization of Dialplan application “Fax to email” after applying backup from rel340
[WMS-1934] – sys: rotate audio recording, voice mail, fax, backups to avoid lack of space on disk
[WMS-1969] – kite: fixed an issue with video calls in case remote side uses Collaboration + WP (hotfix, issue introduced in the latest beta)


Version 3.82.33160.40 Date: 05/10/2016

Features

[WMS-1485] – col: support video calls from Collaboration WebRTC to iOS, Androd, WP600A
note: update the applications to the latest version!
[WMS-1890] – sys: add possibility of stopping to support VPN
Added the button “Disable” in WMS Settings > Tools and utilities > Remote support
limitations: Kite and Screen sharing do not work

[WMS-1931] – sys: Dutch translation support for WP 2015 and email notifications

Improvements

[WMS-1740] – col: audio call now starts when user presses video call button without an existing audio call
[WMS-1797] – col: improved emoji emoticons quality and download optimization
[WMS-1903] – sys: send call to next queue member when reached timeout using call group strategies “longest idle” or “fewest calls”
[WMS-1936] – api: alert-call system improvements

Fix

[WMS-1944] – sys: fixed an issue in which automatic phonebook sync was performed even if no scheduled synchronization was configured

Firmware

[WMS-1957] – dev: new firmware for WP480(G) 2015 ver. 55.145.6.49; WP490(G) 2015 ver. 59.145.6.62
what’s new?
WP480/WP480G:

  • added an option allowing you to select Ringtone Output in Menu > Audio > Option (Handsfree\Headset)
  • fixed delay issue when adjusting volume

WP490/WP490G:

  • network initialization is no longer started in case of no network change was done (example: change in BLF configuration no longer restarts Network settings)

Version 3.82.33104.39 Date: 29/09/2016

Fix

[WMS-1954] – web: fixed an issue with colleagues being deleted from roster after upgrade to WMS ver. 3.82.33094.39 (HOTFIX!)

Firmware

[WMS-1953] – dev: new firmware for WP490(G) 2015 ver. 59.145.6.61
what’s new:

  • fixed DHCP request issue which could prevent the phone from receiving IP address in some cases
  • added an option allowing you to select Ringtone Output in Menu > Audio > Option (Handsfree\Headset)

Version 3.82.33094.39 Date: 28/09/2016

New Features

[WMS-1885] – sys: WMS sound package in American English (manual installation is necessary)
Command to install EN-us sound packages:
apt-get install wms-sounds-us-new wms-sounds-us-g729-new wms-sounds-us-tvoice-g729-new wms-sounds-us-tvoice-new

[WMS-1897] – web: new language selection in WMS: En-us (for the USA)

Improvements

[WMS-1814] – wms: translation improvements
[WMS-1908] – col: added visualization of function keys in Collaboration
Added new tab in Collaboration (visible in case Colleage / Speed Dial / Park orbit feature keys are configured)
For each of these Function keys you can enable the following options (in Settings > Function keys):

  • View calls: visual notification when there is an incoming call
  • Audio notification: audion notification when there is an incoming call
  • Direct transfer: blind transfer

– Double click when ringing to pick up a call
– Double click when idle to call

[WMS-1919] – col: screen sharing switched from HTTP to HTTPS

Fixes

[WMS-1151] – sys: fixed an issue causing call drop after 40 minutes if NAT_IP parameter was enabled in SIP trunk settings
[WMS-1912] – col: fixed an issue in which after user changed ACL group, other users in group could no longer see colleagues in Collaboration (ref.: 2016081010000034)
[WMS-1916] – web: fixed an issue in which callgroup strategy “Call All 10” did not work correctly after beta ver. 3.82.31998.22
[WMS-1925] – col: fixed an issue in which bottom icons in chat were not visible after reducing browser window size
[WMS-1929] – col: fixed an issue with CDR-View filter “Previous week” displaying also the first day of the current week
[WMS-1939] – wms: fixed an issue in which it was impossible to log in to Collaboration with Active Directory sign-on


Version 3.82.33025.38 Date: 22/09/2016

New Features

[WMS-1678] – sys: support of BLF monitoring options
Added options to Collaboration Settings -> Function keys (for Colleague, Call group, Speed Dial, Park Orbit):

  • View calls icon (eye): see who is calling (“on” by default, if ACL “can view calls of users” allows it)
  • Audio notification icon (sound): audio notification when there is an incoming call (“off” by default)
  • Direct transfer icon (arrow): press during a call to perform a blind transfer (off by default)

[WMS-1713] – sys: support of firewall bypass for web phone
[WMS-1829] – col: support printer driver in terminal server
note: Windows Integration Utility got substituted with Fax Printer
limitation: for fax sending make sure Collaboration is running
[WMS-1752] – col: added hot-key dialing from any application
hot key can be set in Collaboration settings > Personal, Dialing hot key
limitation: call from Outlook at the moment is possible only via hot key

[WMS-1774] – col: added possibility to send DTMF from Attendant Console
added “DTMF” quick button and “D” hotkey allowing you to send DTMF during a call
[WMS-1840] – col: support for local time visualization in History and Voicemail
[WMS-1843] – sys: support of caller name in iOS missed calls push notifications
[WMS-1877] – wms: added min / max session timer value to SIP trunk settings

Improvements

[WMS-1773] – wms: added PRI trunk configuration parameter Line Framing: Sf/Esf/Crc4/NoCrc4
[WMS-1836] – sys: improved translations of iOS push notifications
[WMS-1842] – wms: added new parameter to enable / disable DC impedance in FXO trunk settings
[WMS-1848] – sys: auto delete old call record files on Cloud PBX to avoid no free space issue in rootfs

Fixes

[WMS-1714] – sys: one way audio after semi-attended transfer with some voip operators in case of change of SSRC (otrs: 2016071110000481)
[WMS-1824] – col: fixed an issue in which it was impossible to set available status in collaboration when USA country code is used
[WMS-1845] – sys: fixed an issue in which video was not passing correctly between iOS / Android apps / WP600AXX and Mobotix starting from WMS ver. 3.82.32500.28
[WMS-1847] – web: fixed an issue in which it was impossible to answer the call in Collaboration when “any device” was selected and the list of devices was closed
[WMS-1849] – col: fixed an issue in which “show contact” from live search did not work
[WMS-1853] – sys: fixed sipproxy memory leak starting from WMS ver. 3.82.32840.35
[WMS-1871] – col: chat transfer must not allow attended transfer
[WMS-1904] – wms: fixed an issue with search filter in Dialplan menu not working after saving Dialplan configuration
[WMS-1910] – sys: fixed an issue with storages not mounting automatically on Cloud PBXs after reboot
[WMS-1915] – col: fixed an issue with fax sending if USA country code is set in Dialplan settings
[WMS-1917] – sys: fixed an issue with dial timeout set in users preferences not working starting from WMS ver. 3.82.32349.27


Version 3.82.32992.35 Date: 15/09/2016

Feature

[WMS-1874] – col: support callto: URI for outgoing calls in Chrome extension

Improvement

[WMS-1846] – sys: improvements for nl sounds

Fixes

[WMS-1810] – sys: fixed an issue with welcome email for Cloud PBXs containing unreachable domains
[WMS-1882] – sys: fixed an issue with wrong username in iOS push notifications in case more than one app is registered to one extension
[WMS-1888] – sys: fixed an issue with silent ringtone not working after WMS v. 3.82.32840.35

Firmware

[WMS-1884] – dev: new firmware for BRI, PRI and FXS (pre 2013), v. 2.0.135.676
fixed no syslog via SSH console issue after upgrade to the latest FW version


Version 3.82.32944.35 Date: 08/09/2016

Improvement

[WMS-1809] – col: improved WebRTC phone mute functionality and added auto hide / show on mouse over

Fixes

[WMS-1832] – sys: fixed an issue in which iOS app push notifications did not work in some cases
[WMS-1844] – sys: fixed an issue in which mail notification for call recording was not sent starting from
WMS v. 3.82.32709.31 (hotfix)
[WMS-1856] – col: fixed an issue with CDRview not displaying recent events after upgrade to the last beta 3.82.32840.35 (hotfix)


Version 3.82.32840.35 Date: 01/09/2016

New Features

[WMS-1601] – sys: NL sound package
at the moment it is necessary to install manually the Dutch sound package:
1) after you’ve upgraded the PBX to this beta version, go to WMS > Settings > Upgrade and enter the name of the repository into the field: rel380beta
2) access the PBX via console and launch the command:
apt-get install wms-sounds-tvoice-nl-g729-new wms-sounds-tvoice-nl-new
3) switch the language to Nederlands for the user (via Collaboration or WMS)

[WMS-1673] – col: working hours support for Outlook calendar sync
[WMS-1725] – sys: American date format support in Collaboration
[WMS-1737] – api: VTiger integration via Collaboration web app (beta)
Info for developer: https://github.com/Wildix/WebCRM
[WMS-1746] – sys: added an option on Devices page allowing you to turn off DST (“Edit” device)
[WMS-1776] – wms: added ACL rule allowing you to disable pre-answer messages

Improvements
[WMS-975] – sys: improvements and optimizations for sounds packages
[WMS-1755] – wms: minor improvements for Devices page
– show immediately Semi-automatic mode if the PBX is Cloud
– reduce “Mac Address” column to “Mac” in Automatic mode

[WMS-1775] – sys: call alert system improvements
[WMS-1792] – col: device selection is now supported when Collaboration is open inside an iframe
[WMS-1794] – col: line numbers are now shown for active calls in Attendant Console
[WMS-1802] – sys: increased memory on pbx.wildix.com system

Fixes
[WMS-1647] – sys: fixed an issue in which CDR SQLite DB could not be activated in case of problems with the existing file
[WMS-1739] – col: fixed an issue with umlauts not being displayed correctly in call history with MySQL CDR
[WMS-1751] – sys: fixed an issue in which faxes with BRI / PRI did not work in some cases when SRTP was active
[WMS-1777] – col: fixed an issue with status not changing in case current Outlook calendar event was deleted
[WMS-1779] – col: fixed a problem in which Chrome app stopped opening CDR-View and Screensharing sessions after the first one
[WMS-1791] – wms: fixed an issue with ban period not shown correctly
[WMS-1808] – sys: fixed an issue with import from Active Directory: it is now possible to enter base DN in uppercase
[WMS-1813] – sys: fixed an issue in which incoming calls may stop working for trunks after some time in some cases
(hotfix! issue was introduced in the latest beta)
[WMS-1815] – sys: fixed an issue in which call group strategy “call all 32” did not work for Cloud PBX or in case call group manager did not have a registered device
[WMS-1816] – col: fixed no audio issue after attended transfer with Web Phone and VoIP trunk in some cases
[WMS-1822] – sys: fixed bad audio quality during calls between W01FXS/W24FXS new series and WP410 in some cases

Firmware

[WMS-1785] – dev: firmware for W-AIR and W-AIR SB bases, ver. 03.55.00.21
what’s new: umlauts (ä,ö,ü) and letters with accent (à, è, ò, é) are now shown correctly on display
[WMS-1825] – dev: firmware for WP410 2015 ver. 50.145.6.42; WP480(G) 2015 ver. 55.145.6.47, WP490(G) 2015 ver. 59.145.6.47
WP410:
– fixed provisioning procedure via Portal (auto.wildixin.com)
– fixed: phones continue to use old IP address after receiving NACK from DHCP
– fixed: icon “away” replaced by icon “missed calls”, in case when phone has many icons on left side of display
– fixed: pressing BLF-KEY during a conversation performs pickup instead of transfer
WP480/WP480G:
– fixed: phones continue to use old IP address after receiving NACK from DHCP
– fixed: pressing BLF-KEY during a conversation performs pickup instead of transfer
WP490/WP490G:
– fixed ringback noise issue in case 180 with SDP.
– fixed: BLF does not display transferred user ID
– fixed an issue with “Colleague call with audio” BLF in case of fast call answer or reject
– fixed lost registration issue
– fixed: pressing BLF-KEY during a conversation performs pickup instead of transfer.


Version 3.82.32709 Date: 02/08/2016

Feature

[WMS-1734] – wms: added option “Incoming CID” from / p-asserted-identity,from

Improvements

[WMS-1748] – sys: improved call class detection for Austrian numbers
[WMS-1753] – wms: user on remote PBX can now record file from sounds menu (otrs: 2016071810000076)
[WMS-1772] – wms: welcome message emails are now sent with HTTPS links

Fixes

[WMS-1743] – sys: fixed an issue with backup procedure returning error in some cases
[WMS-1756] – wms: fixed an issue with MySQL / MSSQL turning off automatically if server was not available during upgrade
[WMS-1757] – wms: minor usability and graphical fixes
[WMS-1762] – sys: fixed an issue in which Kite did not work in some cases for Cloud pbxs
[WMS-1763] – sys: fixed an issue in which transfer button in call dialog window was unavailable after call transfer to trunk
[WMS-1765] – wms: fixed an issue with Voicemails being present if “incoming” filter was selected in History
[WMS-1766] – col: fixed an issue in which transfer of two ongoing calls was not possible while receiving an incoming call
[WMS-1767] – col: fixed an issue with Collaboration returning an error each time user set a tag for active call
[WMS-1768] – sys: fixed one way audio issue after semi-attended transfer for calls over wms network

Firmware

[WMS-1745] – dev: new firmwares for WP410 2015 ver. 50.145.6.38; WP480(g) 2015 ver. 55.145.6.43
WP410:

  • added 2 function keys and 2 BLF pages
  • fixed an issue with phone sending “200OK” with only one codec if WP configured in REMOTE priority
  • fixed an issue with phone freezing in some cases

WP480(G):

  • added icon indicating BLF page (WP480G)
  • user ID after call transfer is now displayed on BLF
  • fixed an issue in which phone was endlessly playing beeps after fast answer or reject using audio BLF (Colleague call with audio)
  • fixed an issue in which “missed calls” icon in some cases could be replaced by “away” icon

Version 3.82.32669 Date: 29/07/2016
Features
[WMS-1060] – wms: enabled sign-on for Active Directory users sync mode in WMS
how-to: WMS Users > Import, select AD and select “sign-on”
notes: feature is also enabled for WP600AXX starting from v. 2.5.44 (preview); iOS, Android apps

[WMS-1231] – sys: added support for setting user status from WP features menu and via feature code
[WMS-1507] – wms: added the option allowing you to specify user extension number for application “Jump to depending on user status”
[WMS-1618] – sys: added support for American date format on WP 2015 / W-AIR
[WMS-1671] – sys: implemented call parking feature
how-to: add a new user of type “Park orbit”; this extension can be used to park calls
note: “Call waiting” and “Dial Timeout” user preferences can be set for user type “Park orbit”: “Call waiting” allows to park more than one call; “Dial timeout” – return from parking after the specified timeout

[WMS-1720] – col: added “Web CRM” feature which allows opening of a CRM (or another web application) inside Collaboration
note: code and developer documentation
[WMS-1724] – sys: added support for W-AIR outdoor base stations
[WMS-1736] – col: improved missed events notifications
note: after counter reaches 3 new events (chat / calls), only number of missed events is now displayed; counter is updated each time there is a new missed event

Improvements

[WMS-1668] – sys: CDR record is no longer saved in case of failed pickup
[WMS-1733] – col: recording is now started without sending DTMFs to remote side
[WMS-1738] – sys: use STUN requests for RTP learning
this change allows speeding up startup of video from WP600ACG to doorphone camera
[WMS-1747] – wms: improved validation for Call timeout and Mobility timeout fields in users preferences
added validation for Call timeout and Mobility timeout fields; Call timeout max value increased to 600 sec

Fixes

[WMS-1596] – col: fixed an issue in which user from Client PBX did not receive invitation for chat conference started from Server PBX
[WMS-1730] – sys: fixed an issue with one way audio from Web phone to WP old series
[WMS-1744] – sys: fixed an issue in which PBXs location could not be updated
[WMS-1750] – sys: fixed an issue with ringback tone playback on W04FXS
[WMS-1751] – sys: fixed an issue in which faxes could not be sent in some cases from BRI/PRI media gateways in case SRTP was active


Version 3.82.32560 Date: 22/07/2016

Features
[WMS-808] – sys: support video calls from Kite user to iOS, Android, WP600A, WP600ACG user
Note: video from Kite to Android will be available starting from the next version of Android app
[WMS-1676] – sys: support for return of conf calls to conference owner
Improvements
[WMS-1667] – dev: improved W04FXO impedance settings to avoid noise during line connection
[WMS-1715] – wms: option “show original caller number” in SIP trunk settings is now disabled by default if Country is set to Italy in Dialplan General Settings
Fixes
[WMS-1702] – sys: fixed an issue in which WMS upgrade could fail due to missing archive directory
[WMS-1721] – col: fixed an issue creating high load on CPU using Chrome due to animation in presence status icon
[WMS-1732] – sys: fixed an issue in which user still had status “in conference” after exiting WebRTC Kite conference
Firmware
[WMS-1717] – dev: FW for WP480(G) 2015 ver. 55.145.6.36; WP490(G) 2015 ver. 59.145.6.37
– added “Away” user status icon
[WMS-1692] – dev: FW for W04FXO/w04FXS ver. 5.01e
– fixed a rare noise issue in case of incoming call from PSTN line to FXO


Hotfix Date: 20/07/2016

[WMS-1728] – wms: fixed an issue in which Dialplan applications which followed “Call group” application were not executed (introduced in WMS v. 3.82.32515)
[WMS-1722] – col: fixed an issue in which call transfer button for calls answered on Call group was not active (introduced in WMS v. 3.82.32515)


Version 3.82.32520 Date: 18/07/2016

Features

[WMS-1660] – sys: support storage devices over QEMU virtualized systems
[WMS-1670] – col: added phonebook lookup while adding speed dial buttons
Improvements

[WMS-1694] – sys: increased conference max users limit to 60
[WMS-1696] – sys: visual improvements of call dialogs
Fixes

[WMS-1708] – wms: fixed an issue which impossibility to open Main Dialplan after applying a backup file
[WMS-1615] – dev: fixed wrong missed call notification in case of multiple applications like “Dial the phone” or “Callgroup” in Dialplan
[WMS-1636] – col: fixed an issue where missed call and missed call notification were assigned to a wrong user if the 1st call group agent rejected the call
[WMS-1712] – sys: fixed an issue in which provisioning of W01FXS first series did not work starting from WMS ver. 3.82.32423
Firmware

[WMS-1699] – dev: new FW for W24FXS 2015 ver. 27.18.01.10
what’s new:

  • fixed an issue in which caller name wasn’t displayed in case number started with “+”
  • reduced ring call duration for “internal” class

Version 3.82.32423 Date: 12/07/2016

Feature

[WMS-1608] – wms: added default tone zone option to SIP-RTP page (supported by W-AIR, W01/02FXS, WP 2015) and SIP trunks settings

Fixes

[WMS-1683] – dev: fixed wrong visualization of device registration in Users menu of Client PBX using UCARP-based failover
[WMS-1700] – wms: fixed an issue in which existing contacts could be deleted and re-created after new import in some cases (ref: 2016062010000439)

Firmware

[WMS-1705] – dev: new FW for WP480(G) 2015 ver. 55.145.6.33; WP490(G) 2015 ver. 59.145.6.35

  • WP480(G) / WP490(G): fixed an issue where in case wideband codec was used, phone replied with “200OK” message containing only one codec
  • WP490(G): – WP490(G): added the 2nd page of BLF keys allowing you to see the labels of 10 BLFs situated on the right panel (paper labels are no longer needed, now you can see the labels on the phone’s screen; note that you must use buttons 9-18 on the right panel for LEDs and for control; press Right and Left Navigation Keys to switch between the pages)

Version 3.82.32387 Date: 08/07/2016

note: after the upgrade it is necessary to upgrade FW of WP 2015 and disable call waiting on call group members (for call groups using other call distribution strategies than “call all”)

Features

[WMS-1605] – col: added support for audio conferences
how-to: when you have two active calls, press “conference” button to put them into conference
[WMS-1653] – col: popup URL improvements – added the option to open external applications and remove first digit from caller number
see popup URL prompt for details
[WMS-1677] – sys: added the option option /rw2/etc/provision.conf[wildixp2] POWER_LED=no allowing you to turn off by default the power LED of WP 2015

Improvement

[WMS-1547] – sys: improved logic of call distribution strategy for queues which do not use “call all” strategy
incoming calls are now distributed to available call agents, without waiting for the previous call to be answered
note: to apply this change it is necessary to disable call waiting for call group members

Fixes

[WMS-1701] – col: fixed an issue in which call reject option was enabled by default for whitelist class in users preferences starting from beta release 3.82.32349.27
[WMS-1526] – sys: fixed an issue where in some cases mobility calls were not shown in Collaboration
[WMS-1635] – sys: fixed an issue with user status and status message set to default after restart of iOS/Android app
[WMS-1688] – wms: fixed an issue in which number normalization for incoming calls was not performed after Dialplan application “Mobility extension lookup” (ref: 2016070410000155)

Firmware

[WMS-1669] – dev: new FW for WP 2015
WP480/WP480G ver. 55.145.6.32; WP490/WP490G 2015 ver. 59.145.6.32; WP410 ver. 50.145.6.30

  • improved live search on WP410
  • missed calls are now synced with the PBX
  • destination number for forced call forward is now indicated
  • visual improvements, correct position of icons on the display

Version 3.82.32349 Date: 05/07/2016

New Feature

[WMS-1379] – col: added the possibility to change user status (DND / Away / Available) from WP and set up phone features for each status (call forwarding, call waiting, mobility extension, etc) from WP / Collaboration


set up call features for each user status in:

  • Collaboration Settings > Features
  • WP > Features menu

change user status via

  • WP > Features menu
  • feature code (60 by default)

added new ACL: cannot set Status (DND/Away)

Improvements

[WMS-1654] – wms: added icons for WP4XX 2015 to Users menu
[WMS-1664] – wms: added the possibility to limit access to some menus of WMS interface for WMS admins in ACL configuration (ref: 2016063010000018)

note: now it’s possible to limit access to the menus “Hotel integration”, “Generate trace” and “Remote support” in Users > Groups, “Edit admin permissions” (available only for “admin” user)

[WMS-1665] – col: improved sync of calendar status messages with Outlook Integration

Fixes

[WMS-1632] – col: fixed an issue where in case of long chat history it was impossible to receive new messages and view chat history using Firefox
[WMS-1644] – sys: fixed an issue where in some cases after system recovery system required an input from console in order to boot
[WMS-1648] – col: fixed an issue where the flag “Erase existing value if empty value is received” in Phonebooks Import using certain backends was applied to all the fields of the Map section and not only to the selected ones, causing the loss of some contact information after Phonebook sync (ref: 2016062010000439)
[WMS-1649] – dev: fixed an issue in which after changing the Server W-AIR Base station in W-AIR network user / slot allocation was lost and it was necessary to re-login W-AIR handsets


Version 3.82.32312 Date: 01/07/2016

New Features

[WMS-980] – col: Window Integration Utility 2.3.140: user password for Integration Utility is now stored in Windows registry using encryption
note: IU does not depends on WMS version and is available for all the users
[WMS-1633] – sys: added call waiting tone parameter for WP Phones 2015
how-to: WMS Users > Edit preferences > Settings section – Call waiting tone (enable / disable)

Improvements

[WMS-1614] – sys: new FW for WP 2015
v. 55.145.6.27 for WP480/WP480G; v. 59.145.6.26 for WP490/WP490G: added live search (search results are displayed below)
[WMS-1655] – sys: added support for DST (Daylight saving time) for US / Canada

Fixes

[WMS-1484] – wms: fixed an issue with wrong visualization of device registration in Users menu in some cases
[WMS-1591] – sys: W-AIR now uses the timezone set on Devices page
[WMS-1597] – kit: fixed an issue in which video conference scheduling did not take timezone into account
note: this change does not depend on WMS version and is available for all the users
[WMS-1604] – wms: fixed an issue in which upgrade procedure could fail in some cases
[WMS-1645] – sys: fixed an issue in which recovery did not work if local DNS resolver was not working
[WMS-1651] – col: fixed an issue in which some calls were not visible in History menu due to wrong call class detection (ref: 2016062010000181)
[WMS-1663] – sys: fixed an issue with silent ringtone playback on WP
note: the issue was introduced in one of the previous BETA versions


Version 3.82.32245 Date: 24/06/2016

Firmware
[WMS-1551] – dev: support for SRTP on BRI/PRI media gateways, FW ver. 2.0.35.661
[WMS-1576] – dev: new FW for W-AIR base stations, ver. 03.55.00.18:

  • PTT (push to talk) feature for W-AIR 100 / W-AIR 150
    enable: Settings > PTT – “On”
    how-to: press and hold the Mute button: say your message
    limitation: PTT does not work over Repeater
  • Support for Internal / External / Whitelist / Blacklist ring tones selection on the handset and silent ring for DND
  • Support for multi DECT registration on W-AIR 100 / W-AIR 150
  • Fixed no audio issue after attended transfer

Improvements
[WMS-1630] – api: improved predictive dialer: users in status “paused” are now considered as not available
[WMS-1631] – kit: graphical improvements
[WMS-1634] – api: added numerical ordering of hotel rooms in WebAPI demo
[WMS-1643] – api: added click2call feature using tel: wildix: uri with Chrome extension
note: in case Ingetration Utility is installed, more priority is given to Chrome extension

Fixes
[WMS-1575] – wms: fixed an issue with impossibility to access CDR-View on Windows if appdata folder is installed on a remote server (ref: 2016052710000295)
[WMS-1640] – col: fixed an issue in which pressing alt+q using German keyboard closed Collaboration Chrome App on Windows


Hotfix Version 3.82.32221 Date: 22/06/2016

– fixed an issue with hold button not working in Collaboration via WebRTC phone
introduced in the last beta version 3.82.32181


Version 3.82.32181 Date: 21/06/2016

Feature
[WMS-1624] – dev: added support for W-AIR base stations with Mac Addresses range 9C7514347XXX
released to stable

Fix

[WMS-1625] – sys: fixed an issue with WMS upgrade being sometimes interrupted because of filesystem errors
released to stable

 

Firmware
[WMS-1581] – dev: new FW for WP 2015-2016

WP410 v. 50.145.6.27

  • Fixed an issue which could prevent the phone in some cases from playing any sounds (ringtone, audio, etc)
  • Added Live search feature when entering a number (results are displayed below)

WP480/WP480G v. 55.145.6.22

  • Added Live search feature when entering a number (results are displayed below)
  • Fixed DNS failover issue

WP490/WP490G v. 59.145.6.22:

  • Added Live search feature when entering a number (results are displayed below)
  • Fixed DNS failover issue

 


Version 3.82.32164 Date: 17/06/2016

New Features
[WMS-1451] – col: Outlook calendar sync via plugin (beta)
requirements: Outlook 2007 or later; Microsoft .NET Framework 3.5 or later
MORE INFO: https://blog.wildix.com/en/wildix-outlook-calendar-sync-beta/

[WMS-1599] – api: added information about connected call in WebAPI
developers documentation updated https://www.wildix.com/webapi/doc/

Improvement
[WMS-1592] – sys: “user busy” is now played back instead of “user has rejected the call”

Fixes
[WMS-1593] – col: improved map view of colleagues
note: colleagues locations are now fitted the the map view; map is now focused on Europe only in case there are no colleagues available on other continents
[WMS-1600] – sys: added PHP support for PostgreSQL in Wildix platform
[WMS-1613] – wms: added correct call class detection for French mobile numbers starting with 7


Version 3.82.32138 Date: 14/06/2016

Improvements
[WMS-1525] – col: improved “Edit colleagues” window design
[WMS-1582] – col: user status “online” renamed to “available”

Fixes
[WMS-1437] – col: fixed an issue in which presence information of some users could be wrong after PBX reboot or after PC waking from sleep mode, unless the page was reloaded
[WMS-1542] – wms: fixed an issue with sound file upload not working in case the folder name contained space character (ref: 2016052410000095)
[WMS-1549] – sys: fixed an issue in which second blind transfer did not work in some cases (ref: 2016052510000119)
[WMS-1598] – dev: fixed no audio issue reproducing in some cases after call transfer with W04FXO (ref: 2016052610000215)


Version 3.82.32097 Date: 10/06/2016

New Features
[WMS-1406] – wms: added device status to Devices menu
note: focus the cursor on the status to view the SIP server address and the transport used
known issues: device status of W01FXS old series is not displayed

[WMS-1480] – wms: added Chrome application that opens collaboration as a standalone application (alpha version)
link to install: https://chrome.google.com/webstore/detail/wildix-collaboration/klaamdejgopombbjfpfhlebpjlmokgna
access: the “Apps” folder from your Google Chrome browser
liitation: impossible to create a Kite Videoconference

[WMS-1492] – wms: added support for “auto (dns ptr-srv)” transport in SIP trunk advanced settings
[WMS-1507] – wms: new Dialplan application “Jump to if user status is” (away / DND)

Fixes
[WMS-1448] – sys: fixed one way audio issue after attended transfer to WP 2015 in WMS network (ref: 2016042810000053; released to stable as hotfix)
[WMS-1464] – sys: improved procedure of backup generation on PBX
in case backup file generated on the PBX contains empty or wrong values, notification is shown, an email is sent to the sysadmin and warning is written to the syslog
[WMS-1527] – col: fixed an issue in which call recording files from remote PBXs could not be downloaded via CDR-View
[WMS-1546] – sys: fixed an issue in which incoming fax to FXS did not work using “fax detect” with direct RTP enabled
[WMS-1550] – dev: fixed an issue in which WP 2015 could in some cases display wrong contacts in XML phonebook
[WMS-1570] – wms: improved error notification in case file attached for fax sending is in wrong size (non A4 *.tiff or *.pdf)
[WMS-1578] – wms: fixed an issue in which contacts could not be deleted from certain phonebooks via Collaboration in some cases (ref: 2016060610000181; released to stable as hotfix)


Version 3.82.32043 Date: 03/06/2016

New Features
[WMS-1509] – sys: forward notification is now shown on phones only in case “force call forward” is enabled, on W-AIR handsets also the destination number is indicated
[WMS-1535] – dev: support of HTTPS provisioning for W-AIR

Fixes
[WMS-1468] – api: fixed duplicated contacts using import from Outlook (ref: 2016030310000021)
[WMS-1530] – sys: fixed an issue in which it was impossible to change status of some feature codes after upgrade to last stable release 3.81.31808
[WMS-1534] – wms: fixed incorrect size of WebRTC video window after resizing call dialog window
[WMS-1545] – col: fixed an issue in which choice for audio device was not available in case of call via “Any” device to phone number starting with “+”

New firmware for WP 2015-2016
[WMS-1556] – dev: new firmwares for WP480R2/WP480GR2 ver. 55.145.6.18; WP490R2/WP490GR2 ver. 59.145.6.18

  • visual imporvements for multi page BLF keys on WP480G
  • support of “space” symbol in XML browser request (e.g. when searching for a contact)
  • 802.3az Energy Efficient Ethernet function enabled on WP480G / WP490G
  • fixed an issue in which Transfer key on the keypad did not work on WP480 starting from the previous fw version (beta version)
  • other minor visual and audio improvements of BLF keys behavior, handsfree / handset mode, 3-way conferences

 


Version 3.82.31998 Date: 01/06/2016

New Features

[WMS-879] – wms: added the option to call simultaneously up to 32 devices / users using “ring all” strategy for call groups (only Atom CPU HW PBX)
now two options are available:

  • Call All 10: call all available users by groups of 10 people
  • Call All 32: call up to 32 devices or 32 users (iOS/Android/WP600A/Web devices not supported)
    all registered devices ring simultaneously (up to 32 devices)

[WMS-1201] – wms: chat history and sync feature
PBX > CDR, Settings, “Chat History and Sync” – feature is by default enabled on new PBXs
[WMS-1352] – sys: added the possibility to see remote party caller ID when monitoring call groups via function key “Call group” on WP480 / WP490 2015
[WMS-1450] – api: add method to retrieve the file being recorded getrecfilename
documentation: https://manuals.wildix.com/pbx-control-apis/ GET /Calls/:channel/Recordings/

Improvement
[WMS-1500] – wms: added selection of more country codes in SIP / FXO / ISDN trunks, Dialplan General Settings

Fixes
[WMS-1401] – col: SIP trunk name is now shown correctly in CDR-View even in cases the value is different from “Auth Login” in SIP trunk settings (ref: 2016041110000254)
[WMS-1452] – col: external calls made via Mobility feature are now displayed in personal call history
[WMS-1463] – col: fixed an issue with wrong callee and caller in history in case of call from Mobile APP via GSM
[WMS-1503] – sys: fixed an issue in which after disabling video on iOS/Android/WP600A/ACG, video did not stop on remote side
[WMS-1506] – sys: fixed an issue in which fax sending did not work in some cases using Mail2Fax (ref: 2016050910000346)
[WMS-1511] – col: fixed an issue with wrong “To” number in CDR for incoming fax calls using W01FXS (ref: 2016042810000311)
[WMS-1513] – wms: fixed a duplicate contacts error which occurred after importing a CSV file generated on PBX with old WMS version
[WMS-1519] – conf: fixed an issue in which after reaching 500MB file, conference recording stopped
note: when the limit is reached, the recording continues automatically in a new file (this fix is not related to WMS version)
[WMS-1521] – wms: fixed an issue in which “Dial the phone” Dialpan application automatically set Called number to “default”
[WMS-1528] – col: fixed wrong order of users in Collaboration in case using “Department” field
[WMS-1532] – sys: fixed an issue in which call could not be answered after expiring Mobility timeout, in case SIP trunk for Mobility used TCP or TLS transport
[WMS-1540] – dev: fixed wrong missed call notification on WP 2015


Version 3.82.31929.21 Date: 24/05/2016

New Feature

[WMS-1314] – sys: added beep to silent ringtone
note: Web phone – in case of a second incoming call, after hang up of the first call, beep is played; WP4X0 – beep is played in case DND is enabled with “silent ring”
[WMS-1321] – sys: audio re-invites from FXS ATAs are now always sent to the other side after failed T.38 re-invites (already released to stable)
[WMS-1327] – col: added support for multi sessions of CDR-View in terminal server installations
[WMS-1395] – conf: added video conference recording
note: this feature does not depend on WMS version
[WMS-1396] – col: users participating in a videoconference are now displayed with DND status “in conference”
[WMS-1411] – sys: added notification in case history service is not available

Improvements

[WMS-1389] – sys: fixed an issue with missing ringback during forward of external call to SIP trunk with some VoIP operators
[WMS-1478] – wms: existing fax / room users are no longer removed in case not received from the backend during the import
note: the feature works if the option “Remove existing users which are not received from the backend” is enabled but “Type” field is not activated
[WMS-1514] – col: Dutch translation improvements

Fixes

[WMS-1186] – sys: fixed an issue in which user who refreshed Collaboration page could not see details of ongoing calls of remote users
[WMS-1246] – sys: fixed an issue in which Storage page was not available for VM PBXs
[WMS-1459] – sys: fixed an issue where in some cases users received wrong Voicemail notification (already released to stable)
[WMS-1461] – wms: fixed incorrect size of port blocks window on Trunks page
[WMS-1467] – dev: fixed an issue in which device received VLAN settings even if no VLAN settings have been entered for this device on Devices page
[WMS-1490] – sys: fixed an issue where in some cases after user password was changed to a new one, this change was not applied (already released to stable)
[WMS-1491] – col: fixed duplicate records for some calls in CDR-View (ref: 2016050310000222)
[WMS-1497] – sys: fixed an issue with W01FXS losing login during “Configure/Sync device” procedure after upgrade to v. 3.81.31808 (already released to stable)
[WMS-1512] – wms: dnsmasq failed after applying old backup (already released to stable)
[WMS-1516] – api: fixed an issue in which mass alarm calls did not work in some cases using WebAPI Hotel Manager (ref: 2016050510000102)
[WMS-1520] – sys: Dial button when selecting a Contact name in Phonebook menu of WP4XX 2015 now works correctly
[WMS-1523] – kit: fixed an issue in which screen sharing button was hidden during call for Cloud PBXs


Version 3.82.31852.20 Date: 18/05/2016

New Feature

[WMS-1445] – sys: support 3 pages of BLF keys on WP480G (allowing up to 17 BLF keys) and VM key (long press “1”)
note: use right and left Navigation keys to move between the pages

Improvements

[WMS-1374] – col: click on selected element during transfer now performs attended transfer, not the blind one
[WMS-1432] – wms: added missing impedance setting for FXO
[WMS-1440] – kite: added support of auto login and prefill name and email parameters in URL request
note: documentation will follow the next week
[WMS-1441] – sys: changed logics of recording file names making them harder to guess
[WMS-1442] – col: added “Save” button in Web Phone settings to confirm the choice of audio devices
[WMS-1498] – api: updated WebAPI library on PBXs to the latest version

Fixes
[WMS-1429] – sys: improved LDAP recovery during recovery procedure
[WMS-1446] – sys: fixed an issue in which WMS upgrade did not work in some cases for virtual PBXs in chroot environment
[WMS-1456] – sys: fixed no audio issues which could appear after changing time and date settings on the PBX
[WMS-1465] – api: fixed an issue in which numbers containing special symbols (e.g. brackets or spaces) could not be correctly recognized using tel: sip: wildix: uri with Integration Utility on Windows
[WMS-1466] – col: import of more than 500 contacts from office365 is now possible
[WMS-1475] – api: fixed an issue in which attended transfer via WebAPI did not work using Safari

FW
[WMS-1488] – dev: new firmware for WP490/WP490G version 59.145.6.10

  • fixed an issue in which some function keys could not be correctly displayed on WP490G
  • addressed issues with time visualization
  • fixed an issue where phones could continue to use old IP address after receiving a new one from DHCP

[WMS-1496] – dev: new firmware for WP480/WP480G version 55.145.7.8

  • support of 3 pages of BLF keys (up to 17) and VM button
  • other minor visual improvements and fixes related to the correct visualization of function keys

Hotfix version 3.81.31808.18 Date: 12/05/2016

[WMS-1462] – wms: signal status of GSM trunk is now displayed correctly
[WMS-1481] – wms: fixed an issue in which edit of multiple users preferences did not work correctly
[WMS-1484] – wms: fixed an issue with wrong visualization of device registration in users menu


Version 3.81.31783.18 Date: 11/05/2016

Fix

  • [WMS-1359] – sys: fixed an issue with missing ringback during semi-attended transfer using TAPI

Firmware for W-AIR base stations and handsets, v. 03.24.00.24

  • added support for TLS
  • fixed an issue where base stations in multicell installations could become unreachable showing red status till reboot (issue introduced after upgrade to the last version 03.24.00.22)
  • improvements for call waiting tone (reduced length and added playback every 30 seconds)
  • fixed an issue in which busy tone was not played back on W-AIR 70 / 100 when calling an external busy number

Version 3.81.31743.18 Date: 6/05/2016

New Feature
[WMS-991] – conf: added scheduling of WebRTC Kite video conferences
note: available during the invitation of participants

Improvements
[WMS-1383] – wms: added hotline timeout parameter in user preferences
[WMS-1453] – col: only the first 4 ongoing call dialogs are now displayed; scroll down to view other active calls

Fixes
[WMS-530] – col: fixed an issue in which mobility calls were not shown in History tab in some cases (ref: 2015090210000193; released again)
[WMS-1354] – wms: fixed an issue in which GSM, FXO, BRI, PRI trunks were still displayed on Trunks page and in Dialplan after deleting the media gateways from Devices page
Note: now empty values are displayed
[WMS-1366] – col: user initials (used in case user picture is absent) now change after user name is changed
[WMS-1422] – sys: fixed an issue with slow Dialplan execution when using large phonebooks (>50k contacts) on old PBXs (otrs: 2016042210000019)
[WMS-1443] – sys: fixed an issue with 10 seconds delay for calls via GSM mode on iOS/Android application
note: introduced in Beta version 3.80.31422
[WMS-1460] – sys: fixed an issue where call class could not be detected automatically for PSTN trunks via “Dial Trunk Group” application (otrs: 2016050210000215)


Version 3.81.31685.17 Date: 29/04/2016

New Feature
[WMS-1021] – col: design improvements for video conference on WP600ACG and Android devices

Improvement
[WMS-1423] – col: added an option to start chat from History menu of Collaboration

Fixes
[WMS-1353] – sys: fixed an issue in which Caller number was set to “Mobility” instead of “Office” when calling from iOS / Android App via GSM
[WMS-1367] – sys: fixed an issue in which call recording was interrupted after attended transfer from W-AIR
[WMS-1427] – dev: fixed a random issue with provisioning of W04FXS using DHCP mode (otrs: 2016042110000173)
[WMS-1428] – col: fixed “mailto” link Collaboration using Chrome browser on Mac OS X
[WMS-1447] – fixed an issue in which BLF keys stopped working reliably after WMS Beta version 3.80.31531


Version 3.81.31663.17 Date: 26/04/2016

IMPORTANT: After the upgrade to this beta version, you will be able to upgrade from the rel380 repository only when the next WMS stable version becomes available

New Features

[WMS-659] – wms: added notification in WMS in case ports needed for remote trunks / phones are not open
note: click the “Port blocks” icon in the top right menu of the WMS – green (PBX completely reachable), yellow (some ports are open), red (no connection)
[WMS-939] – sys: added support for internal CDR storage on WGW90 and bigger PBXs
note: added notification that MySQL / MSSQL is required if the PBX is under high load
[WMS-1213] – col: call dialogs usability improvements
note: active calls are now displayed in the right part of the screen; to hide the call dialog, click on the “handset” icon in the call dialog
[WMS-1386] – col: added link to fax transmission report in History
Improvements

[WMS-1340] – col: fixed an issue when access to CDR-View / Screensharing could be blocked by web proxy
note: no need to add exceptions for wildixintegration.eu domain in web proxy settings
[WMS-1365] – col: Chrome extension improvements
numbers starting with + are now correctly processed
“wildixin.com” is now automatically added in case user hadn’t entered it in domain settings
other minor improvements

[WMS-1391] – sys: the minimal length of the PIN code for access to Kite videoconference using feature code (98) is now limited to 7 digits
[WMS-1394] – api: added reason cause for “call_terminated” events in WebAPI (ref: 2016041310000143)
New methods were added to WTAPI.TelephonyPlugin.Call; link to developer documentation online
[WMS-1421] – col: fixed an issue when in some cases it was impossible to attach a fax PDF file in A4 horizontal (landscape) orientation
Fixes

[WMS-530] – col: fixed an issue in which mobility calls were not shown in History tab in some cases (ref: 2015090210000193; released again)
[WMS-1371] – sys: added ucarp redundancy script on PBXs
Path to the file – /usr/sbin/failover_enable.sh
[WMS-1384] – wms: fixed wrong order of backups by creation date in Firefox browser
[WMS-1385] – col: fixed an issue in which default options to open Popup URL were cleared after saving user preferences from WMS
[WMS-1405] – sys: fixed an issue in which call could drop due to insufficient RTP ports range defined on SIP-RTP page (ref: 2016041310000161)
note: it’s no longer possible to save RTP-SIP settings in case the defined port range is not sufficient for your PBX model
[WMS-1407] – col: fixed wrong caller number format in Collaboration in case of incoming call from trunk
note: original number was displayed, without normalization
[WMS-1408] – dev: fixed an issue in which W24FXS 2015 couldn’t be provisioned in some cases
[WMS-1410] – wms: fixed an issue in which DNS stopped working on PBX in some cases after WMS network restart
[WMS-1413] – col: fixed an issue where in some cases noise appeared during an active Web phone call when receiveing a file
[WMS-1415] – col: fixed an issue in which answer of a second call from same caller number caused a hangup of the first call
[WMS-1417] – dev: fixed an issue in which PC port did not work on WP410 if phone was configured with two VLANs (voice VLAN on LAN port and data VLAN on PC port)


Version 3.80.31589.14 Date: 14/04/2016

New Features

[WMS-1206] – dev: TLS support on W04FXS / W04FXO
[WMS-1285] – wms: added import / export of Dialplan
after the export, it’s necessary to check all the references in Dialplan rules (on phonebooks, call groups, Included Procedures, etc), as they might be empty or missing

Fixes

[WMS-1241] – wms: missed call is not shown on WP in case of call forwarding
[WMS-1372] – sys: increased preanswer timeout when calling user with DND status
[WMS-1378] – sys: fixed an issue when in some cases user couldn’t make more than 1 simultaneous call
[WMS-1380] – col: fixed an issue when in some cases CDR-View could not be accessed if Gmail phonebooks were used
Note: Starting from this version automatic upgrade of W-AIR repeaters is temporarily disabled

It is possible to manually upgrade the FW of repeaters via the base station web interface:
1) go to Repeater menu, enter “39” into the field “WAIR-Repeater” and press “Save/Start Update”
2) go to Repeater menu and wait till the upgrade process is finished
3) delete repeaters and register them again following the procedure described in W-AIR System Administrator Manual (chapter 3.4. Set up Repeaters)


Version 3.80.31531.14 Date: 08/04/2016

New features

[WMS-1124] – sys: added support for return from semi-attended transfer (ref: 2016011410000263)
feature is now supported in all the three cases: user busy, user rejected the call, user is not answering
[WMS-1275] – col: support redial last called number via headset integration on supported headsets
note: Headsets Compatibiltiy Matrix document
[WMS-1305] – col: added the right-click action on a contact (History menu) to show Notes
notes can be added to a Contact during a call
[WMS-1312] – wms: added impedance setting for fxo gateways
WMS Trunks > FXO > Edit trunk
Improvements

[WMS-1329] – sys: blocked processing fax from email in case of the same sender and receiver
note: do not use in Fax Settings email of user who must send faxes
[WMS-1357] – wms: default tone setting (WMS Devices > Edit) is now possible also for W01/02/24FXS
Fixes

[WMS-1093] – col: fixed errors in History and CDR-view in matching destination of a call
[WMS-1302] – col: audio interruption during calls using webrtc phone
[WMS-1320] – col: fixed an issue in which it was impossible to resume a call on hold after hanging up an incoming call using headset
[WMS-1322] – sys: fixed an issue with one way audio after 3 minutes in a conference call with remote users
[WMS-1347] – wms: fixed an issue where CDR Sqlite backend couldn’t be activated after WMS reset
[WMS-1356] – col: fixed an issue in which new history entries were not automatically shown after a day
[WMS-1358] – sys: number normalization for Mobility calls is now performed correctly
[WMS-1370] – dev: fixed an issue in which PC port didn’t work on WP490G with VLAN configured


Version 3.80.31453.13 Date: 04/04/2016

New feature

[WMS-1124] – sys: added support for return from semi-attended transfer (ref: 2016011410000263)
example: user A is in conversation with user B; User A calls user C and transfers the call before user C answers; in case user C is unreachable, return from transfer is now supported on WP phones

Fixes

[WMS-1334] – sys: fax copy is now saved even in case of unsuccessful fax sending
[WMS-1348] wms – fixed an issue with DHCP server disabling after upgrade to v. 3.80.31368
(released as hotfix to stable)
[WMS-1349] – wms: fixed an issue in which dnsmasq could not start due to bad DCHP range
(released as hotfix to stable)

Firmware

[WMS-1344] – dev: new firmware version 50.145.6.23 for WP410
– improved ringtone playback: now it’s played back only to speaker
– fixed an issue in which VLANs did not work; Limitation: PC port does not work if Voice VLAN + Data VLAN are configured


HOTFIX Version 3.80.31439.13 Date: 01/04/2016

[WMS-1348] wms – fixed an issue with DHCP server disabling after upgrade to v. 3.80.31368

[WMS-1124] sys – add support for return from attended transfers when destination does not answer (ref: 2016011410000263)

Also fixed an issue with upgrade for WP4X0 2015 due to wrong firmware format in firmware.json (starting from v. 3.80.31383)


Version 3.80.31422.13 Date: 01/04/2016

Improvements
[WMS-1197] – sys: automatic call back is now correctly processed even in case using different ports of PSTN trunks
[WMS-1253] – sys: set Mobility timeout to min 10 seconds in case user has an iOS/Android client connected
Fixes
[WMS-1290] – wms: contacts with same names are now correctly imported via CardDAV
[WMS-1295] – col: Jabra headset integration minor improvements
[WMS-1330] – api: fixed a problem in which it was impossible to attach a file using Fax printer on Windows / Mac OS
[WMS-1339] – api: fixed a problem in which web page could reload continuously using Chrome extension to access Collaboration


Version 3.80.31383.13 Date: 29/03/2016

New Feature

[WMS-1210] – dev: added support for WP480G

Improvements

[WMS-1217] – sys: annexb=no is now added in “OK” replies for compatibility with SIP devices which do not add it


Version 3.80.31371.12 Date: 25/03/2016

New Features

[WMS-1209] – dev: added support for W02FXS

[WMS-1291] – col: added support for Shared Voicemail in Collaboration
Note: Users who are subscribed to another user’s Voicemail can now receive notifications to Collaboration and listen to new Voicemails (Voicemail menu)
How-to: Shared Voicemail is set in WMS Users > Edit preferences, “Settings” – tick off the checkbox and enter the extension number of user to subscribe to

Improvements

[WMS-1228] – col: when + button during a conference to add colleague is used, invitation is now automatically sent

[WMS-1236] – dev: support of visual / audio BLF for WP490G / WP480 / WP490 2015
how-to: Collaboration Settings > Function keys:
“Colleague call”: see who is calling monitored user and pickup a ringing call
“Colleague call with audio”: receive an audio notification in addition and pickup a ringing call

[WMS-1237] – col: visual improvements for Function keys menu

[WMS-1280] – wms: visual improvements for Sounds menu

[WMS-1308] – sys: improvements for WP 2015 XML browser usability
Important: the four softkeys have changed their position in History and Phonebook menu and now they have the same position as in Dial window

Fixes

[WMS-1286] – wms: fixed incorrect indication of firmware version during semi-automatic provisioning

[WMS-1293] – wms: refresh of page is no longer needed to be able to select a “music on hold” file added to an empty directory

[WMS-1306] – sys: fixed an issue where in some cases call files could not be deleted causing issues with tmp memory

[WMS-1309] – sys: provisioning of W24FXS 2015 now works also with domain name

[WMS-1313] – wms: fixed an issue in which it was possible to save a password containing unsupported symbols

[WMS-1319] – dev: fixes an issue with W-AIR base disconnections in multi cell installations
note: released as hotfix to rel380


Version 3.80.31344.12 Date: 22/03/2016

New Features

[WMS-1091] – col: Chrome extension click2call feature
how-to: select a phone number and right-click -> select “Call” (“W” icon); support for URI tel: / sip: / wildix:
[WMS-1195] – wms: added new ACL: cannot use Voicemail
[WMS-1196] – col: added support for attendant transfer in Attendant Console and support for up to 20 lines
[WMS-1199] – col: added support for multiple call handling and hold / resume via handsets
how-to:
– press and hold the Answer/end button (2 secs) to put a current call on hold and answer an incoming call
– press and hold the Answer/end button (2 secs) to switch between held call and active call
– double-tap the answer/end button to reject an incoming call when on hold
– tap the answer/end button to end current call and answer incoming call

[WMS-1232] – sys: added feature key shortcut to enable / disable forward
how-to: add a feature key “Speed dial” and enter: <feature code>3<forward number>
e.g.: <61>3<100> – enables/disables busy call forwarding (depending on current status) to number 100

notes:
– supports “busy call forward”, “unavailable call forwrad”, “force call forward” (61, 62 and 63 by default)
– supports setting of call class, example: <61>3<100>1 – where “1” is “external” call class

[WMS-1248] – api: added transfer PBX API
note: API is not related to WMS version, so update from beta repository is not necessary
documentation: LINK

[WMS-1277] – api: added ordering of groups inside hotel demo app
[WMS-1249] – dev: now call group name is displayed on BLF key of WP4X0 2015 instead of ID number
[WMS-1289] – col: added speed recognition for chat message and live search
how-to: press the microphone icon (live search or chat) and speak
[WMS-1299] – wms: added back “registration proxy” support in SIP trunk settings
if this field is filled in, it is used as destination to send registrations; “outbound proxy” is not used then

Improvements

[WMS-1101] – col: users with FXS phone connected are now displayed with blue color status
[WMS-1188] – col: added back button to export report in Excel in CDR-View
[WMS-1272] – col: recordings / fax files are now shown in CDR-View
[WMS-1279] – col: added support for search patterns to match numbers which start with a digit or a sequence of digits (e.g. %55)
example: add %55 search pattern into “Direction” filter to search for any number which ends with 55 or add %55% to match all numbers which contain 55
[WMS-1257] – api: added support of Any and Mobility device via WebAPI
[WMS-1264] – wms: PBX domain name was added as URL to PBX in welcome message sent to new user

Fixes

[WMS-1185] – wms: special characters are no longer allowed in host name
allowed symbols: lower case letters, digits and hyphen
[WMS-1224] – col: fixed an issue in which counter of new chat messages was resetting after new incoming file
[WMS-1240] – sys: fixed an issue with missing ringback in case of call from WP600A/ACG to colleague whose status was away with mobility feature enabled
[WMS-1256] – wms: fixed an issue in which phonebook sync did not work correctly due to wrong setting of source_id field
note: now if the field “ID” wasn’t previously set, same value as in “name” will be used
[WMS-1263] – col: fixed error beep in Collaboration in case call has been completed elsewhere
[WMS-1266] – sys: normal ringtone is now used instead of silent during quick recall to call group
[WMS-1268] – wms: fixed an issue with missing call pop-up after disconnecting a PBX from WMS network
(otrs: 2016030910000073)
[WMS-1271] – wms: changed default base ports settings for ISDN gateways to avoid random one way audio issues
[WMS-1281] – wms: fixed an issue with headset integration on MAC using Plantronics CS60
[WMS-1301] – dev: codec g729 is now disabled for w-air SMB (small business base)
notes:
– now it is impossible to call through trunks on which only G.729 is selected using W-AIR SMB, so please make sure other codecs are added in trunk settings
– this is a temporary change and it solves an issue with random one-way audio after several days of usage;

– already released to stable as hotfix


Hotfix 16/03/2016

[WMS-1274] – sys: new kernel compatible both with hardware and cloud PBXs


New firmware for WP410 Version 50.145.6.20 Date: 11/03/2016

– fixed handset background noise
– added missing French translations for some menus


Version 3.80.31254.09 Date: 09/03/2016

Fixes
[WMS-1192] – wms: fixed an issue when in some rare cases when connecting Client to Server, WMS Network page showed infinite loading
[WMS-1202] – sys: fixed an issue when in some cases mass fax sending did not work correctly
issue introduced in WMS version 30929
[WMS-1267] – sys: fixed a crash in case of pickup of a group call and in case of contrary calls (two users calling each other at the same time)
issue introduced in WMS BETA version 31200


Firmware for WP410 v.50.145.6.15 Date: 04 March 2016

[WMS-1252] – dev: fixed an issue in which WP410 stopped reproducing audio for the ongoing call after second incoming call had been cancelled


Version: 3.80.31236.09 Date: 03/03/2016

New Features
[WMS-1198] – api: add get kite info and get name to webapi
[WMS-1221] – api: add getdestinationchannel method to webapi
Developer documentation: https://www.wildix.com/webapi/doc/
Improvements
[WMS-945] – sys: Voicemail voice menu improvements
playback of number and time is disabled now by default, but available as an option after the message playback
[WMS-1036] – sys: improved visualization of BLF keys on WP 2015 to avoid scrolling
Fixes
[WMS-1177] – sys: fixed an issue in which only default music on hold could be played back for Dial the phone / trunk Dialplan applications
[WMS-1193] – sys: fixed an error during saving of changes on SIP-RTP page on PBXs after upgrade to v. 3.80.31106.05
note: already released in stable as a hotfix
[WMS-1200] – wms: fixed an issue in which “Save” button sometimes did not work on SIP-RTP page on Cloud PBXs
note: already released in stable as a hotfix
[WMS-1222] – sys: fixed an issue with calls via Integration Utility if active device was not set and no supported device was connected


Version: 3.80.31200.08 Date: 29/02/2016
New Features

[WMS-627] – wms: support ACL destination call class type for France, Germany, Austria, Switzerland, the Netherlands, Belgium, Spain, Portugal, UK
remember that Country Code indicated in General Dialplan Settings is used for call class detection, and country code in the trunk settings is used for number nomralization

[WMS-1114] – col: added PBX selection to CDR-View filter and the option to match a pattern (2015110910000112)

  • PBX filter is available in case you have more than 1 PBX and displays only active PBXs
  • match a pattern, how-to: add a new pattern which finishes with % into “Direction” filter to match all the numbers which start with these digits; example: to match all the numbers starting with 5 or starting with +38, add patterns 5% or +38%

[WMS-1160] – dev: line keys and phonebook / history management improvements for WP 2015

  • unused keys are now displayed as “empty” instead of line keys
  • increased phonebook access speed

 

Improvement

[WMS-1180] – sys: added support for quoted-printable encoding using mail2fax / mail2sms
Fixes

[WMS-530] – col: fixed an issue where mobility calls were not shown in Collaboration history (otrs: 2015090210000193)

[WMS-1012] – sys: fixed an issue with audio interruption on WebRTC phone caused by re-invites from trunk

[WMS-1066] – sys: fixed an issue in which playback after fax detection failed in case g729 was selected as a preferred codec in an incoming invite

[WMS-1080] – sys: Improvements for “Recover system” console operation; “Repair filesystem” command is merged to “Recover system”

[WMS-1099] – sys: fixed an issue where in some cases sipproxy could stop forwarding calls to devices connected over port 443 tls

[WMS-1142] – sys: fixed wrong notification of missed call in Collaboration for answered calls in call group

[WMS-1144] – wms: fixed an issue where Abruzzo was displayed as default region for Italy in phonebook
note: now empty field is selected by default

[WMS-1190] – wms: fixed an issue where iOS app login failed because of incorrect configuration in on the Dialplan General Settings page (starting from v. 3.80.31019)

[WMS-1191] – col: fixed a problem with chart export in CDR-View

[WMS-1194] – col: fixed an issue preventing a user to set tag in History menu of Collaboration

[WMS-1211] – dev: new firmware v. 59.145.5.254 for WP490 and WP490G 2015 (minor graphical and usability improvements)


Hotfix version 3.80.31133.08 25/02/2016
[WMS-1212] – dev: fixed WP410 mic noise when using handset


Hotfix 18/02/2016
[WMS-1184] – sys: fixed an issue in which PBX was unable to complete boot without Internet connection


Version 3.80.31133.07 Date: 17/02/2016

Features
[WMS-736] – col: added indication of who is calling a colleague whose status is monitored via BLF key
[WMS-1076] – wms: added ordering of call group members
how-to: select one or multiple users in a call group and use arrows Up & Down
[WMS-1133] – api: extended “Originate” PBX Control API to allow all scenarios
[WMS-1139] – col: added tag visualization in web pop-ups, option to open automatically pop-ups after answer / ring
Configure in: Collaboration Settings > Personal (below Popup URL)
Improvements
[WMS-891] – wms: refactoring and redesign the Backup system page
[WMS-1113] – wms: fax report now contains the correct source number and fax header
[WMS-1130] – api: added support “Device” Login / Logout PBX Control API for WP4x0 2015
[WMS-1134] – col: improved password form usability, minimal password length is reduced to Google standards
Passwords can contain any combination of ASCII characters and must contain a minimum of 8 characters.
[WMS-1152] – col: added support for Jabra EVOLVE in Headset integration component
[WMS-1168] – api: added option for HTTPS connection using webapi
[WMS-1169] – col: Web phone works now on Chrome OS and Android
[WMS-1172] – wms: users are now ordered by name in Hotel manager WebAPI
Fixes
[WMS-1011] – sys: calls hung up during playback of Voicemail introduction message are now shown as missed
[WMS-1095] – col: special symbols are now shown correctly in XML browser of WP480 / WP490 2015 and in Collaboration history
To apply this fix, press “Save” on the WMS PBX > CDR > CDR settings
[WMS-1137] – col: tag names are now shown correctly in graphs in CDR-view
[WMS-1154] – col: fixed an issue with chat scrollbar overlapping live search submenu and call dialog window
[WMS-1164] – wms: fixed an issue with trace generation failure in case backup partition was mounted on Windows share
[WMS-1175] – col: fixed an issue where screen sharing could not be started on Windows PC via RDP because of missing admin permissions


Hotfix v. 3.80.31106.05 Date: 15/02/2016

[WMS-1140] – col: fixed an issue in which CDR-View did not load in some cases if MySQL backend was used


New Firmware for WP410, version 50.145.5.243 date: 05/02/2016

[WMS-1163] – dev: corrected microphone gain on headset and handset


New Firmware for W-AIR base and W-AIR SB 03.24.00.22 date: 04/02/2016

[WMS-1148] – dev: fixed an issue in which W-AIR was losing SIP registration when connected together with devices which have a longer registration timeout


Hotfix 01/02/2016

– stability improvement


Version 3.80.30995.05 Date: 29/01/2016

New Features
[WMS-925] – wms: support for import of Office 365 contacts
[WMS-955] – sys: added hotline feature in WMS user preferences
how-to: “Hotline” – tick off the checkbox and specify the number; number is called automatically when user lifts the handset; supported on WP4X0 2015, FXS gateways 2014-2015
[WMS-1009] – col: added Wildix headset integration on Windows and improved on Mac OS X; supported Jabra, Plantronics, Sennheiser audio devices with USB connectivity
[WMS-1017] – sys: support license download via HTTP proxy

Improvements

[WMS-806] – sys: continue record of conversations started via Dialplan after attended call transfer
(ref. 2015111110000135)
[WMS-1123] – col: added parameter allowing user to enable pop-up notifications when in DND (Collaboration Settings > Pesonal)

Fixes
[WMS-1098] – sys: fixed an issue in which call between devices of the same user was not possible in case callwaiting was disabled
note: calls between devices of the same user are now always allowed
[WMS-1102] – sys: fixed an issue in which DNS record was not updated in case WMP was not available during the first request
[WMS-1111] – wms: fixed an issue in which wrong warning about fax delivery failure was displayed to user during fax sending from Collaboration (even in case fax was sent successfully)


Hotfix 27/01/2016

[WMS-1121] – sys: fixed an issue where in some cases outgoing calls via SIP/PSTN trunks were rejected by PBX


German sounds packet updated 27/01/2016

[WMS-1103] – sys: added missing audio file for Voicemail inviting a user to record his/her name


New Firmware for WP480 2015 55.145.5.221 Date: 26/01/2016

[WMS-1127] – dev: new FW includes time format improvements, XML improvements
Details:
– XML file is now automatically updated after exit from Voicemail menu
– time format HH:MM is applied (seconds are no longer displayed)
– minor graphical improvements


Version 3.80.30931.03 Date: 21/01/2016

Fixes the issue:
[WMS-1054] – sys: sent faxes are saved on Share in TIFF format instead of PDF


Version 3.80.30926.03 Date: 20/01/2016

Features
[WMS-591] – col: add Voicemail notification
[WMS-745] – sys: new logic of missed calls notifications
– missed call notification, if viewed from WP, no longer appears on Collaboration and vice versa (new logic integrated for WP4X0 2015 and Collaboration, WP600A coming soon)
– number of missed calls is displayed
– notification doesn’t disappear after page refresh

[WMS-890] – col: show initials in place of default avatar
[WMS-993] – conf: add auto redirect to local PBX for users connecting via conference.wildix.com
[WMS-996] – col: after executing Dialplan application “Authenticate user”, check ACL for this user and show call in CDR as if originated by this user
[WMS-1006] – col: allow usage of WebRTC phone when Collaboration is blocked by ACL (ref. 2015121510000304)
[WMS-1032] – dev: improve security of WP XML browser requests
[WMS-1048] – sys: start SSH on port 2222 in WMS as an application
[WMS-1053] – wms: add T38 ON / OFF switch to support non-standard trunks not capable of refusing T38 re-invites

Improvements
[WMS-512] – sys: speed up history sync so that last call becomes immediately visible
[WMS-1035] – sys: do not call on mobility if user is already speaking on a VoIP device to avoid iOS / Android calls interruptions
[WMS-1083] – sys: improve format of Call Group Pick Up Feature Codes: 5988*1 88*59*1 8859*1

Bugs
The following issues have been FIXED:

[WMS-940] – wms: when using custom registration parameters trunk registration status is not shown and “From” field is not used
[WMS-989] – sys: “Return after transfer” does not work for calls transferred via TAPI driver
[WMS-1039] – col: impossible to select device from call dialog for call generated via “Any” device
[WMS-1045] – sys: WMS network stops working until reboot if Server WAN changes address and Client is connected via DNS Name
[WMS-1072] – col: HTML5 notifications are missing for conference chat messages
[WMS-1079] – col: if Collaboration is not available, device selection field is empty (ref. 2016011110000171 / 2016010710000222)
Note: “Any” must be displayed
[WMS-1081] – sys: call group members receive missed call notification even if call was answered elsewhere after upgrade to Beta release 18/12/2015
[WMS-1088] – col: calls via attended transfer to WebRTC phone are hung up
[WMS-1089] – sys: portmap is enabled even if no NFS shares are configured
[WMS-1106] – col: cannot connect to Collaboration if ACL rule “cannot view everybody” is applied


New FW v. 50.145.5.237 for WP410 Date: 15/01/2016

[WMS-1094] – dev: audio quality improvements


New FW for W24FXS Date: 30/12/2015

– stability improvements (firmware version 27.18.01.07)


New FW for WP410 Date: 25/12/2015

[WMS-1057] – dev: new firmware v. 50.145.5.234 for WP410 contains speed improvements for XML Phonebook


Hotfix Date: 24/12/2015

Package containing
[WMS-806] – sys: continue record of conversations started via Dialplan after attended call transfer (ref. 2015111110000135)
was removed from the repository


Version 3.80.30793.52 Date: 22/12/2015

New Features
[WMS-848] – wms: add call class selection to “Dial the trunk” Dialplan application
[WMS-910] – col: add WebRTC phone support for BT audio devices answer / hang up buttons for MAC OS X via Jabra / Sennheiser USB-BT dongles
[WMS-695] – col: Windows Integration Utility 2.3.110

Improvements
[WMS-806] – sys: continue record of conversations started via Dialplan after attended call transfer (ref. 2015111110000135)
[WMS-892] – conf: videoconference guests invitation page improvements


Version 3.80.30775.51 Date: 18/12/2015

New Features
[WMS-908] – sys: forward hang up reason causes received from trunks and remote PBXs to local devices

Improvements
[WMS-979] – sys: support TAPI device login using both WEB (Collaboration) or SIP password
[WMS-1003] – wms: enable T38 “no signal” packets on ISDN MGW to improve fax transmission behind NAT
[WMS-987] – sys: add translation for “no messages” in phones interface (Voicemail)
[WMS-861] – sys: support connection to PBX over HTTPS or alternative TLS port for WP 2015
[WMS-863] – sys: improve hang up causes management in trunks / trunk groups to avoid multiple call tries
[WMS-919] – sys: update *.wildixin.com DNS entry immediately after public IP change
[WMS-747] – col: resources usage improvement in case of phonebooks with over 400k contacts (ref: 2015111910000246)


Version: 3.80.30724.51 Date: 15/12/2015

Improvements

[WMS-718] – col: simplify CDR-View translation and usage
[WMS-883] – wms: increase upload size of backups / CSV files to 20 MB

Fixes
[WMS-995] – wms: MAC addresses are not shown on Devices page starting from WMS 3.80.30667.50

Task
[WMS-994] – dev: new firmware v. 27.18.01.06 for W24FXS 2015
what’s new:

    • improvements for call waiting tone
    • support of semi-attended transfer between 2 extensions of W24FXS 2015
    • correct behavior of R/Flash button:

in case of second incoming call during an active call:

      • press R to put the active call on hold and to answer the second incoming call
      • press R+1 to end hte active call and to answer the second incoming call

in case of two calls (one active and one on hold):

    • press R to swap between the calls (or R+2)
    • press R+1 to end the active call and to resume the call on hold

Version: 3.80.30708.50 Date: 11/12/2015

New Features
[WMS-877] – col: Wildix Collaboration Google Chrome extension
how to: follow the link and click “Add to Chrome”

Improvements
[WMS-813] – sys: show that license has expired or is about to expire for virtual PBXs without access to Internet
[WMS-826] – wms: do not allow two users to own the same mobility number

Fixes
[WMS-886] – col: chars with accents and umlauts are not shown correctly in collaboration history with MSSQL backend
[WMS-986] – col: limit BLF configuration improvement [WMS-872] only to WP 2015 models


Version: 3.80.30667.50 Date: 08/12/2015

New Features
[WMS-888] – sys: feature key and feature code for dynamic call group login / logout

  • feature code “Call group management”: 97*2*[call_group_ID], where “2” is the option that changes the state (login or logout; while previously there existed only “1” for login and “0” for logout)
  • feature key “Speed dial”: enter the value “cgmanager*2*[call_group_ID]” into the field

[WMS-962] – sys: new global Dialplan variable PIN_LENGTH allows you to limit the number of digits necessary for password validation (via feature code “Login” or in case telephone is blocked)
Note: the default value is 5 digits, the minimum length is 3 digits

Improvements
[WMS-773] – col: fixed an issue where WebRTC phone automatically enabled the previously chosen audio device once it became available again (even in case another device was already chosen)
[WMS-831] – wms: possibility to enable remote support is now hidden for devices whose IP address is not local


Version: 3.80.30645.49 Date: 03/12/2015

New Features
[WMS-796] – sys: added “NAT IP” field in trunks configuration to set the network connection IP
[WMS-905] – wms: added DirectRTP management via “Set” Dialplan application
[WMS-924] – sys: added global Dialplan variable to disable audio notification in case of call forwarding: DISABLE_FORWARD_NOTIFICATION, ref: 2015112610000198
Improvements
[WMS-787] – sys: improved audio notification reproduced during pre-answer services
Fixes
[WMS-530] – col: mobility calls are now displayed in History (otrs: 2015090210000193)
[WMS-911] – sys: fixed an issue where after timeout specified for “Dial the phone” application, forward rule present in user settings was executed instead of the next Dialplan application
[WMS-944] – sys: fixed wrong time format in Voicemail menu of WP phones 2015
[WMS-897] – sys: fixed an issue where for some operators, value entered in “PAI” in trunk setting was displayed in CID number field on phones and in Collaboration
[WMS-936] – sys: fixed an issue in which password was asked twice to unblock the phone when CID changed via “Set” Dialplan application, introduced in v. 3.80.30446.48 (hotfix, already present in rel380)
[WMS-946] – sys: fixed an issue where calls on hold, received via Call group to WP600A / iOS / Android were unintentionally disconnected, introduced in v. 3.80.30446.48 (hotfix, already present in rel380)


Version: 3.80.30535.49 Date: 01/12/2015

New Features

[WMS-592] – wms: support import of contacts from Exchange Server 2010-2013

Improvements

[WMS-812] – col: default link /collaboration/ is now used for access to Collaboration (instead of /cticonnect/)
[WMS-814] – wms: both TLS and Alternative TLS port (if specified on SIP-RTP page) are now displayed in WMS Network Settings of Server

Fixes

[WMS-776] – dev: special symbols are now correctly displayed in XML browser of WP480/WP490 2015 also when using MSSQL backend
[WMS-777] – sys: added correct subjects to mail notifications in case of scheduled import of users / contacts / scheduled back up
[WMS-824] – sys: fixed an issue with one way audio after semi-attendant transfer for calls in WMS network (issue introduced in v. 3.80.30026.40)
[WMS-869] – sys: Mail2Fax service works now also in case attachment name contains umlauts and accents
[WMS-899] – sys: fixed an issue where rtpengine module restarted each time after pressing “save” on SIP-RTP page, disconnecting WebRTC calls
note: after this change rtpengine module restarts only after changing RTP start or end ports values
[WMS-916] – col: fixed an issue where in some cases error was displayed to user when trying to fetch a list of active conferences
[WMS-934] – dev: fixed an issue where using some operators, fax from W04FXO could fail if call was answered by Fax Server (otrs: 2015101610000039)



(Stable release (rel380) Version: 3.80.30446.48 Date: 27 November 2015)

Version: 3.80.30446.48 Date: 26/11/2015

[WMS-818] – dev: from now on W-AIR base stations automatically timely change to Daylight Saving Time / Standard Time

[WMS-872] – sys: in case a user has configured a BLF key “Colleague” with his/her own extension number, this BLF is no longer displayed on the phone

[WMS-900] – wms: optimized the logic of reconnection to Active Directory

[WMS-837] – col: added an option to disable auto microphone gain control
note: Collaboration Settings > Web Phone > “Auto adjust mic”

[WMS-734] – col: added a button to remove video conferences from the list of active conferences in Messaging menu

[WMS-791] – wms: added a validation preventing a user from setting an incorrect RTP ports interval on SIP-RTP page

[WMS-836] – wms: “Record call” Dialplan application is now correctly executed also in case Called number contains the asterisk symbol (*)

[WMS-912] – sys: fixed an issue with Feature code group pickup not working in WMS version 3.80.30413 (hotfix)


Version: 3.80.30413.47 Date: 24/11/2015

[WMS-809] – sys: fixed an issue in which PBX informed of waiting Voicemail messages even if none were present.

[WMS-817] – sys: fixed an issue in which call forward to user located on another PBX did not work, introduced in WMS release 3.80.30154.44

[WMS-860] – wms: support of Google sync of phonebooks / users over slow Internet connections

[WMS-760] – col: improved live search usability and added contacts photo

[WMS-829] – sys: call block feature is now applied only to calls to features, services, trunks and hunt groups

[WMS-797] – sys: fixed no audio issue between WebRTC Phone and WP600 behind two different WAN connections in Chrome 47 (Chrome 47 soon to be stable!)

[WMS-828] – sys: Pick up of groups with index more than 50 is now possible

[WMS-854] – sys: support upgrade via HTTP proxy

[WMS-825] – api: removed WEB ZD launch support in WebAPI

[WMS-743] – wms: improved Devices page error notifications and usability, added “Comment” field

[WMS-820] – col: added phone number to History of events

[WMS-788] – sys: fixed an issue where user status in Phonebook was not displayed correctly on W-AIR / WP4X0 2015, introduced in WMS release 3.80.29923.38

[WMS-678] – sys: fixed an issue where in some cases BLF keys did not display correctly the presence status for some users
(otrs: 2015092310000331)

[WMS-810] – sys: quick recall feature for users which are busy inside a call group (using “call all” strategy)
note: new suggested timeout for call all strategy = 60 sec

[WMS-880] – dev: new firmware version 59.145.5.226 for WP490 2015.
what’s new: added call and playback buttons inside Voicemail menu

[WMS-873] – sys: fixed audio connection delay after turning on direct RTP on call groups in WMS release 3.80.29923.38

[WMS-751] – sys: caller is now informed in case remote party refused a call

[WMS-716] – dev: added TLS support for W-AIR

[WMS-790] – sys: fixed an issue where Public IP addresses belonging to the same /24 subnet were considered capable of direct RTP, resulting in no audio between devices

[WMS-526] – sys: fixed an issue where custom SIP port (set in “Address or Host Name”) was ignored when “From domain” was enabled in SIP trunk settings


Update from rel380beta repository and install the latest WMS beta to be the first one to try Wildix features, improvements and fixes


Abbreviations

col = Collaboration
wms = Wildix Management System (WMS)
conf = Videconference based on WebRTC Kite
sys = system
dev = devices
api = Windows TAPI and Collaboration WebAPI