|
10 Gigabit Performance Boosts Network Traffic Speed
The PLANET ENW-9800 dual-port 10 Gigabit Ethernet server adapter is an optimal solution for Ethernet applications by providing strict low-power budgets and small form factor. It offers simple integration into any PCI Express x8 server slot via two SFP+ connectors.
The onboard controller featured on the ENW-9800 integrates embedded technology and a 10GbE MAC into a single chip that offers up to 10Gbps of network throughput. PLANET Network solution greatly reduces the TCP/IP packet processing tasks of the server’s CPU by performing enhanced data-handling algorithms, thereby providing nearly 10Gb line speed performance with the simplicity of a conventional Network Interface Card (NIC).
Next Generation Server Adapter for growth and expansion of networking environments
The ENW-9800 is a PCI Express Gigabit Ethernet adapter designed to address high-performance system application requirements. With the innovative PCI Express Bus Architecture, the ENW-9800 provides better performance than the network cards based on 32/64bit PCI architecture. It provides the best solution for one of the major issues of Server Farm Networks - communication speed. Ten times faster than existing 1000Base-SX/LX solutions, using the PLANET ENW-9800 to connect your servers and workstations guarantees extremely high throughput and excellent signal quality.
Seamless Integration
The ENW-9800 operates completely harmony with the OS of the server, enabling simple integration into designs. No any modification to the server's operating system or any special software is needed. The ENW-9800 can take the place of the Ethernet MAC of any conventional TCP connection and the existing TCP/IP stack of server’s CPU is still kept intact. It requires only a simple, standard PCI driver to connect the ENW-9800 to the software.
Application
Server NICs
With ten times performance of existing Gigabit transmission, the ENW-9800 can easily act as a server NIC of your networks by wiring to the backbone Switches. With one PCI Express interface design, the ENW-9800 is right for the main board with PCI Express now and future.
Key Features - Two SFP+ connectors
- PCI Express x8 Host Bus interface
- 16K Jumbo Frame
- IP, TCP checksum offloading
- IEEE 802.1Q Tagged VLAN
- IEEE 802.1p CoS traffic priority
- SNMP RMON Statistics
- Low Power Consumption
- Microsoft, Linux, FreeBSD, Solaris OS
- Virtual NIC support
- Lower CPU utilization: reduce CPU utilization and improve throughput
- Protocol Flexibility
Specification:
| Model |
ENW-9800 |
| Hardware Specification |
| Attachment Interface | PCI Express Host Bus Interface, 8 lanes
PCI Express Rev 1.0a
|
| Media Interface | 2 SFP+ connectors (SFF-8431) |
| Cabling Options | SFP+ |
| Memory | 3Mb internal memory |
| Jumbo Frame | 16KBytes |
| LED Indicators | Link / Active per port |
| Typical Power Dissipation | 16W |
| Dimension (W x D) | 147 x 63.5 mm (Low Profile) |
| Advanced Function |
| Layer 2 Features | • IEEE 802.3x flow control support
• IEEE 802.1q VLAN support
• IEEE 802.1p layer 2 priority queuing
• RFC2819 RMON MIB statistics
• Multicast
• Load Balancing
• Failover
|
| Performance enhancements | • Microsoft Scalable Networking
• TCP Chimney
• Receive-side scaling (RSS)
• Reduced host bus traffic
• Optimization for multiple CPUs
• MSI and MSI-X
• IP acceleration
• Eliminates interrupt sharing
• Widely used network protocol
• IP, TCP and UDP checksum offloading
• Large Send (up to 64 KB)
• IPv4, IPv6
• Linux TOE
|
| NOS Support | • Windows Server 2003, Windows Server Longhorn,
• Windows XP, Windows Vista™
• Linux 2.4, Linux 2.6, Linux 64-bit
• FreeBSD®, Solaris, XEN™, and VMware® ESX 3.0
• Multiple queues management
• Windows Management Interface (WMI)
|
| Standards Conformance |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3x: Flow Control and Back pressure
IEEE 802.1p: Class of service
IEEE 802.1Q: VLAN Tagging |
| Environment |
| Operating | Temperature: 0 ~ 65 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
|
| Storage | Temperature: -40 ~ 85 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
|
|
EM-ENW9800.pdf
