[Massimo_Gallì]

Buongiorno, ho comprato la scheda analogica A200 e la PRI TE220B ed ho problemi nella configurazione Asterisks su Centos 5.4.
Da manuale Sangoma WANPIPE (3.5.10) deve essere SPAN 1 e quindi la digium sarà SPAN 2 e 3.
Ho errori alla partenza del DAHDI.

system.conf
#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
#autogenrated on 2010-02-22
#Dahdi Channels Configurations
#For detailed Dahdi options, view /etc/dahdi/system.conf.bak

# Global data

loadzone = it
defaultzone = it
#Sangoma AFT-A200 [slot:4 bus:5 span:1] <wanpipe1>
fxols=1
echocanceller=mg2,1
fxols=2
echocanceller=mg2,2
fxols=3
echocanceller=mg2,3
fxols=4
echocanceller=mg2,4


#Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 2" (MASTER)
span=2,1,0,ccs,hdb3,crc4
# termtype: te
bchan=25-39,41-55
dchan=40
echocanceller=mg2,25-39,41-55

# Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=3,2,0,ccs,hdb3,crc4
# termtype: te
bchan=56-70,72-86
dchan=71
echocanceller=mg2,56-70,72-86

------
wanpipe1.conf

#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Mon Jul 31 17:10:23 EDT 2006
#
# Note: This file was generated automatically
# by /usr/local/sbin/setup-sangoma program.
#
# If you want to edit this file, it is
# recommended that you use wancfg program
# to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_ANALOG, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 5
FE_MEDIA = FXO/FXS
TDMV_LAW = ALAW
TDMV_OPERMODE = FCC
RM_BATTTHRESH = 3
RM_BATTDEBOUNCE = 16
FE_NETWORK_SYNC = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO

[w1g1]
ACTIVE_CH = ALL
MTU = 8
TDMV_HWEC = YES


wanrouter start

Starting WAN Router...
Loading WAN drivers: wanpipe done.
Starting up device: wanpipe1
--> Loading ec image OCT6116-64S.ima...
Configuring interfaces: w1g1
done.
Waiting for Dahdi /dev/dahdi ...
DAHDI Tools Version - 2.2.0

DAHDI Version: 2.2.0.2
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

66 channels to configure.

DAHDI_SPANCONFIG failed on span 2: No such device or address (6)


dahdi_cfg -vvvvvvv
DAHDI Tools Version - 2.2.0

DAHDI Version: 2.2.0.2
Echo Canceller(s):
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 25: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 25)
Channel 26: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 26)
Channel 27: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 27)
Channel 28: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 2
Channel 29: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 29)
Channel 30: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 30)
Channel 31: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 31)
Channel 32: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 32)
Channel 33: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 33)
Channel 34: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 34)
Channel 35: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 35)
Channel 36: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 36)
Channel 37: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 37)
Channel 38: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 3
Channel 39: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 39)
Channel 40: D-channel (Default) (Echo Canceler: none) (Slaves: 40)
Channel 41: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 41)
Channel 42: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 42)
Channel 43: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 43)
Channel 44: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 44)
Channel 45: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 45)
Channel 46: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 46)
Channel 47: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 47)
Channel 48: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 4
Channel 49: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 49)
Channel 50: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 50)
Channel 51: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 51)
Channel 52: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 52)
Channel 53: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 53)
Channel 54: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 54)
Channel 55: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 55)
Channel 56: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 56)
Channel 57: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 57)
Channel 58: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 5
Channel 59: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 59)
Channel 60: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 60)
Channel 61: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 61)
Channel 62: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 62)
Channel 63: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 63)
Channel 64: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 64)
Channel 65: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 65)
Channel 66: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 66)
Channel 67: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 67)
Channel 68: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 6
Channel 69: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 69)
Channel 70: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 70)
Channel 71: D-channel (Default) (Echo Canceler: none) (Slaves: 71)
Channel 72: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 72)
Channel 73: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 73)
Channel 74: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 74)
Channel 75: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 75)
Channel 76: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 76)
Channel 77: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 77)
Channel 78: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 7
Channel 79: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 79)
Channel 80: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 80)
Channel 81: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 81)
Channel 82: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 82)
Channel 83: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 83)
Channel 84: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 84)
Channel 85: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 85)
Channel 86: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 86)

66 channels to configure.

DAHDI_SPANCONFIG failed on span 2: No such device or address (6)
[root@Asterisk /]#

La cosa strana è che nonostante lo span configurato per il digium pri sia 2 e 3 li vede come 1 e 2 .
Avete qualche idea?
Grazie